scholarly journals Clinical and radiographic outcomes after total hip arthroplasty with the NANOS neck preserving hip stem: a 10 to 16-year follow-up study

2021 ◽  
Vol 22 (S2) ◽  
Author(s):  
Vincenzo De Santis ◽  
Nadia Bonfiglio ◽  
Mattia Basilico ◽  
Greta Tanzi Germani ◽  
Maria Rosaria Matrangolo ◽  
...  
Keyword(s):  
Hip Arthroplasty ◽  
Complication Rate ◽  
Short Form ◽  
High Rate ◽  
Short Stem ◽  
Secondary Outcome ◽  
Leg Length ◽  
Acetabular Cup ◽  
Heterotopic Ossifications

Abstract Background Short-stem Hip Arthroplasty (SHA) are increasingly implanted in recent years thanks to their potential advantage in preserving metaphyseal bone-stock. Among them, the NANOS® short-stem implant demonstrated satisfactory results to short and mid-term. The purpose of this retrospective study was to evaluate the clinical and radiographic outcome of the Nanos® short stem at a minimum follow-up of 10 years. Methods Sixty-seven patients aged 53 ± 20 years were enlisted in the study, for a total of 72 hips. Primary outcomes were survivorship of the implant and clinical outcome measured using the Hip disability and Osteoarthritis Outcome scores (HOOS) and the Short Form Survey (SF12) questionnaire. The secondary outcome was a radiological evaluation calculating the inclination and the anteversion angle of the acetabular cup for each implant and investigating osteolysis, heterotopic ossifications and stem position. Results We observed a 95.5% stem survivorship. The complication rate was 7.6% and three implants underwent revision because of an aseptic loosening, an infection and a periprosthetic fracture due to trauma. Among 58 patients (63 hips) evaluated in an outpatient visit 10–16 years after surgery, improvement in clinically relevant scores comparing with baseline was observed: HOOS score increased after surgery in all its subcategories (from 32.25 ± 14.07% up to 91.91 ± 9.13%) as well as SF12 which increased by more than 18 percentage points. On clinical assessment, the range of motion (ROM) was restored at follow-up, 1 patient (1.7%) showed a squeaking hip and 2 (3.4%) reported leg-length discrepancy. Neutral stem positioning was achieved in 58 hips and heterotopic ossifications occurred in 10 hips (16%). Conclusions The current study reports good clinical and radiological outcomes following NANOS® short-stem hip implant at minimum 10 years-follow-up. Since the high rate of stem survivorship, the low complication rate demonstrated and the overall patient satisfaction, our results suggest NANOS® neck-preserving prostheses should be considered as a valid alternative to standard implants.

The migration pattern and initial stability of the Optimys short stem in total hip arthroplasty: a prospective 2-year follow-up study of 33 patients with RSA

2020 ◽  
pp. 112070002090184 ◽  
Author(s):  
Sheryl de Waard ◽  
Inger N Sierevelt ◽  
Renee Jonker ◽  
Daniel Hoornenborg ◽  
Harm M van der Vis ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Deep Infection ◽  
Migration Pattern ◽  
Short Stem ◽  
Leg Length ◽  
Total Hip ◽  
Initial Stability ◽  
Short Stems

Background and purpose: The consensus that bone stock preservation and optimal restoration of offset and leg length is important in total hip arthroplasty is now widespread, especially for young and active patients. Short stems seem promising in this aspect, though implant stability is still of concern. This study looked at the migration pattern of the Optimys short stem through RSA analysis. Patients and methods: 40 patients were included. RSA images were made directly postoperatively (within 5 days), at 6 weeks and at 3, 6, 12 and 24 months. Double examinations were made for precision measurement. HOOS and pain scores were obtained preoperatively and at 2 years. 4 patients were excluded due to protocol violation and 1 patient was excluded for RSA analysis with a CN number >110. 2 patients were lost to follow-up after 3 and 6 months ( n  = 1 lost, n  = 1 deep infection, respectively). Results: Mean age was 60 years with a mean BMI of 27. RSA analysis of 34 patients showed a significant initial median proximodistal translation (subsidence) of 0.21 mm (IQR 0.64–0.06) and anteversion-retroversion rotation of 0.59° (IQR 0.01–1.34) at 6 weeks, after which the stem stabilises and showed no further significant movement. Median migration in other directions was small. 4 patients had an initial subsidence of >2 mm, all showed secondary stabilisation. HOOS outcomes were satisfactory, with the domain symptoms and pain showing a median score of 95/100 at 2 years. Conclusions: After initial migration the Optimys achieves secondary stabilisation, suggesting low risk on long-term aseptic loosening. Clinical trials registration: NL47055.048.13.

scholarly journals Ceramic-on-metal bearing in short stem total hip arthroplasty: ions, functional and radiographic evaluation at mid-term follow-up

2020 ◽  
Vol 30 (2_suppl) ◽  
pp. 52-58
Author(s):  
Michela Saracco ◽  
Giulio Maccauro ◽  
Andrea Urbani ◽  
Domenico Ciavardelli ◽  
Silvia Persichilli ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Metal Ions ◽  
Hip Arthroplasty ◽  
Short Form ◽  
Hip Osteoarthritis ◽  
Short Stem ◽  
Harris Hip Score ◽  
Radiographic Evaluation ◽  
Total Hip

Introduction: The aim of this study is to evaluate clinical, radiographic and laboratory results of ceramic-on-metal (CoM) (hybrid hard bearing) in total hip arthroplasty (THA), associated with a short stem implant. Methods: From a cohort of 37 patients suffering from primary or secondary hip osteoarthritis who underwent THA using CoM bearing, 19 were suitable for this study. All procedures were performed by the same surgeon using a posterior-lateral approach. All patients were compared clinically using the Harris Hip Score (HHS), Western Ontario and McMaster Universities Osteoarthritis Index (WOMAC), visual analogue scale (VAS), 12-item Short Form Health Survey (SF12F/M), and radiographically (offset, CD angle, limb length discrepancy, cup inclination and anteversion, subsidence, osseointegration, heterotopic ossification). Blood samples were collected in order to evaluate chromium (Cr) and cobalt (Co) ions level. Radiographic evaluations were carried out by 3 different blinded surgeons. A statistical analysis was performed. Results: At a mean follow-up of 97 (73–125) months all implanted stems were well-positioned and osseointegrated. Clear improvements were observed for clinical scores comparing preoperative and postoperative values. Radiographic evaluation showed a good ability to restore proper articular geometry. Cr ion analysis revealed values below the safety threshold except for 1 case. Serum levels of Co were below the threshold in all patients. There was a statistically significant correlation only between Cr metal ions and length of follow-up. Conclusions: CoM bearing has proven to be reliable and safe at a mean 8-year follow-up for patients in whom the components were correctly implanted. The rise of blood metal ions was minimal and involved neither systemic or local toxicity nor influenced clinical results.

scholarly journals Conversion total hip arthroplasty with a proximally modular, distal fixation reconstruction prosthesis following cephalomedullar nail failure

2020 ◽  
Vol 30 (1_suppl) ◽  
pp. 26-33 ◽  
Author(s):  
Daniel Godoy-Monzon ◽  
Fernando Diaz Dilernia ◽  
Francisco Piccaluga ◽  
Alberto Cid Casteulani ◽  
Luis Turus ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Clinical Success ◽  
Femoral Stem ◽  
Harris Hip Score ◽  
Secondary Outcome ◽  
Consecutive Series ◽  
Leg Length ◽  
Total Hip

Background: The goals of intertrochanteric hip fracture (IHF) treatment are stable fixation, early mobilisation and function restoration. If the attempt to reduce, stabilise and fracture healing utilising a femoral cephalomedullar nail (CMN) fails, options for subsequent attempts are limited. Purpose: Evaluate the clinical and radiographic outcomes of conversion total hip arthroplasty (THA) using a modular stem following a CMN failure. Materials and methods: We retrospectively reviewed a consecutive series of patients with an IHF between 2012 and 2014 to identify CMN patients that went on to the subsequent failure and conversion to THA utilising a modular femoral stem (MFS). In all cases, MP Reconstruction Prosthesis (Waldemar Link, Hamburg, Germany) was implanted. Primary clinical outcomes were assessed using Harris Hip Score (HSS) before conversion procedure, 3 months, 6 months and recent office visit post-conversion THA thereafter. The secondary outcome was to analyse intra and postoperative complications. Serial radiographs at each follow-up interval were assessed for clinical success or to confirm adverse events. Results: 28 patients were included in the study; 17 were females. The average age was 72.7 years (SD ± 10.5); the average time from the index procedure to conversion THA was 12.6 months (SD ± 3.5). At baseline, average HHS was 42.1 (SD ± 3.6), improved to 80.7 (SD ± 5.1) at 3 months, 86.0 (SD ± 3.9) at 6-months which levelled off to 86.1 (SD ± 4.0) at final follow-up. There were 4 (14%) post-conversion complications: 2 dislocations, 1 superficial wound infection, 1 patient with symptomatic abductor deficiency. All 4 cases were conservatively treated successfully, the implants were retained, and the patients progressed without further issue. Conclusions: MFSs allow to successfully treat failed CMN and adverse variations in femoral anatomy with a device that will permit simultaneous correction of leg length, offset and version to relieve pain, restore function and create a durable prosthetic to host composite.

Retrospective Clinical and Radiological Outcomes of Total Hip Arthroplasty in 51 Patients After a Mean 8.2 Years Using the Nanos® Short-stem Prosthesis

2021 ◽  
Vol 39 ◽  
Author(s):  
Christian Fischer ◽  
◽  
Julia Dietz ◽  
Karl-Stefan Delank ◽  
Alexander Zeh ◽  
...  
Keyword(s):  
Patient Satisfaction ◽  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Survival Rates ◽  
Short Stem ◽  
Harris Hip Score ◽  
Leg Length ◽  
Total Hip ◽  
The Mean

Introduction: Over the past several years, femoral short-stem hip implants have become more popular as a treatment option in the field of primary hip arthroplasty for younger and more active patients. Current data on clinical outcomes and the implant survival rates in patients with short-stem implants cover a maximum of five to six years. The aim of this study was to assess the survival rates, as well as clinical and functional outcomes, in total hip arthroplasty (THA) using the Nanos® short-stem implant (Smith & Nephew, Marl, Germany) over a follow-up period exceeding 5 y. Materials and Methods: This single-center retrospective study included the first 100 patients who were treated at the Department of Orthopedics at the University Hospital Halle (Saale) between January 2008 and February 2009. Ultimately, the complete data of 51 patients (54 hips) were reviewed. The follow-up period was from May to November 2017. We evaluated patient satisfaction regarding pain and function using a grading system. The Harris Hip Score and Forgotten Joint Score were obtained to evaluate functional outcome after THA. Postoperative radiographic evaluation included the measurement of leg-length discrepancy, changes in the shaft axis, femoral offset and horizontal or vertical center of rotation. Potential postoperative shaft angulation or axial shaft migration was also determined. Radiographic images were checked for radiolucent lines and heterotopic ossification using the classification systems outlined by Green and Brooker. Results: The average follow-up was 97.8 months (8.2 y). The mean patient age at follow-up was 68 y and the body mass index was 28.2 kg/m2. The mean Harris hip score at follow-up was 92.0 and the Forgotten Joint Score was 91.7 %. Survey results showed that patient satisfaction and pain perception were rated very good. No significant change in leg length was observed (mean: 0.1 mm shortening). Overall, a rather varus stem positioning was detected postoperatively (mean: 3.1°). The femoral offset was slightly reduced on average in the entire patient group (mean: -1.8 mm). In the horizontal plane, lateralization of the center of rotation was detected overall (mean: 0.7 mm). In the vertical plane, cranialization was noted (mean: 1.4 mm). The CCD angle did not change. There was no further stem migration postoperatively. Radiolucent lines occurred in 10 cases in Gruen zones 1 and 7. Heterotopic ossification occurred in stages 1 to 3 according to the Brooker classification system. We found no cases of aseptic loosening or other reasons for revision. Conclusion: The outcomes after a mean follow-up of 97.8 months (8.2 y) showed that high levels of patient satisfaction and functional outcome can be achieved with the use of a short-stem endoprosthesis. Sufficient restoration of the patient's individual anatomy paired with high survival rates makes this short-stem prosthesis a reliable implant in total hip arthroplasty.

scholarly journals Small-head metal on metal total hip arthroplasty is associated with a high rate of complication and reoperation at mid-term follow-up

2021 ◽  
Vol 9 ◽  
pp. 205031212110147
Author(s):  
Nobuhiko Sumiyoshi ◽  
Kazuhiro Oinuma ◽  
Yoko Miura
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Adverse Reactions ◽  
Small Diameter ◽  
High Rate ◽  
Metal Debris ◽  
Total Hip ◽  
Metal On Metal ◽  
Small Head

Background: Adverse reactions to metal debris are significant complications after metal-on-metal total hip arthroplasty. Recently, late appearances of adverse reactions to metal debris and subsequent need for reoperations have been reported with small-diameter head metal-on-metal devices. We retrospectively investigated mid-term clinical outcomes of small-head metal-on-metal total hip arthroplasty. Methods: We reviewed 159 hips in 139 patients who had a small-head metal-on-metal total hip arthroplasty (M2a Taper; Biomet, Warsaw, IN) with a minimum 5-year follow-up and documented postoperative complications. Results: Focal osteolysis in either the femur or acetabulum was observed in 12 hips (7.5%, 44 months after surgery on average), with pseudotumor observed in 8 hips (5%, 120 months after surgery on average). Four hips (2.5%) had dislocations (84 months after surgery on average) and six hips (3.8%, 122 months after surgery on average) underwent reoperation. Conclusion: Small-head metal-on-metal total hip arthroplasty is associated with a high degree of complications at mid-term follow-up period. Considering this, we discourage the use of metal-on-metal total hip arthroplasty regardless of head size.

scholarly journals Conservative Management of Medication-Related Osteonecrosis of the Jaws (MRONJ): A Retrospective Cohort Study

Antibiotics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 195
Author(s):  
Elena M. Varoni ◽  
Niccolò Lombardi ◽  
Giulio Villa ◽  
Alberto Pispero ◽  
Andrea Sardella ◽  
...  
Keyword(s):  
Conservative Management ◽  
Prognostic Score ◽  
Clinical History ◽  
Osteonecrosis Of The Jaw ◽  
Pharmacological Therapy ◽  
Complete Healing ◽  
High Rate ◽  
Secondary Outcome ◽  
Severe Side Effect

Background: Medication-related osteonecrosis of the jaw (MRONJ) is a severe side effect of bisphosphonates and anti-resorptive drugs prescribed for treatment of severe osteoporosis, Paget’s disease, and bone malignancies. The aim of this study was to evaluate the clinical outcome of a combined pharmacological and surgical management strategy on patients affected by MRONJ. Materials and methods: Medical records of patients with MRONJ were retrospectively examined to collect clinical history data. Conservative management included an initial pharmacological phase with antibiotics and antiseptic agents, followed by surgical intervention to remove bone sequestrum. Primary outcomes were healing from MRONJ at short term (1 month after surgery) and at longer term (3 months after surgery). Secondary outcome was assessment of recurrences at longer-term follow-up. Results: Thirty-five patients were included in the study with mean follow-up of 23.86 ± 18.14 months. Seven cases showed spontaneous exfoliation of necrotic bone during pharmacological therapy, which in one case did not require any further intervention. At 1-month posttreatment, 31 out of 35 (88.5%) patients showed complete healing. The 25 patients who were followed for at least 3 months revealed a healing rate of 92% (23/25). Recurrences occurred in 7 patients out 23 who showed the long-term healing, after a mean period of 7.29 ± 3.45 months. The prognostic score (University of Connecticut Osteonecrosis Numerical Scale—UCONNS) was significantly higher (p = 0.01) in patients with poor healing as compared to complete healing, both at 1 and 3 months posttreatment. Conclusions: A MRONJ treatment approach based on a combined pharmacological and surgical treatment strategy showed a high rate of healing and few recurrences.

scholarly journals Radiographic Alterations in Short-Stem Total HIP Arthroplasty: A 2-Year Follow-Up Study of 216 Cases

2016 ◽  
Vol 26 (3) ◽  
pp. 278-283 ◽  
Author(s):  
Karl P. Kutzner ◽  
Dominik Pfeil ◽  
Mark P. Kovacevic ◽  
Philipp Rehbein ◽  
Sabine Mai ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Hip Arthroplasty ◽  
Short Stem ◽  
Total Hip ◽  
Follow Up Study

scholarly journals Is three-dimensional–printed custom-made ultra-short stem with a porous structure an acceptable reconstructive alternative in peri-knee metaphysis for the tumorous bone defect?

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Jie Wang ◽  
Jingjing An ◽  
Minxun Lu ◽  
Yuqi Zhang ◽  
Jingqi Lin ◽  
...  
Keyword(s):  
Porous Structure ◽  
Aseptic Loosening ◽  
Bone Defect ◽  
Short Stem ◽  
Leg Length ◽  
Musculoskeletal Tumor Society ◽  
Custom Made ◽  
Orthopedic Oncology ◽  
3D Printed

Abstract Background Long-lasting reconstruction after extensive resection involving peri-knee metaphysis is a challenging problem in orthopedic oncology. Various reconstruction methods have been proposed, but they are characterized by a high complication rate. The purposes of this study were to (1) assess osseointegration at the bone implant interface and correlated incidence of aseptic loosening; (2) identify complications including infection, endoprosthesis fracture, periprosthetic fracture, leg length discrepancy, and wound healing problem in this case series; and (3) evaluate the short-term function of the patient who received this personalized reconstruction system. Methods Between September 2016 and June 2018, our center treated 15 patients with malignancies arising in the femur or tibia shaft using endoprosthesis with a 3D-printed custom-made stem. Osseointegration and aseptic loosening were assessed with digital tomosynthesis. Complications were recorded by reviewing the patients’ records. The function was evaluated with the 1993 version of the Musculoskeletal Tumor Society (MSTS-93) score at a median of 42 (range, 34 to 54) months after reconstruction. Results One patient who experienced early aseptic loosening was managed with immobilization and bisphosphonates infusion. All implants were well osseointegrated at the final follow-up examination. There are two periprosthetic fractures intraoperatively. The wire was applied to assist fixation, and the fracture healed at the latest follow-up. Two patients experienced significant leg length discrepancies. The median MSTS-93 score was 26 (range, 23 to 30). Conclusions A 3D-printed custom-made ultra-short stem with a porous structure provides acceptable early outcomes in patients who received peri-knee metaphyseal reconstruction. With detailed preoperative design and precise intraoperative techniques, the reasonable initial stability benefits osseointegration to osteoconductive porous titanium, and therefore ensures short- and possibly long-term durability. Personalized adaptive endoprosthesis, careful intraoperative operation, and strict follow-up management enable effective prevention and treatment of complications. The functional results in our series were acceptable thanks to reliable fixation in the bone-endoprosthesis interface and an individualized rehabilitation program. These positive results indicate this device series can be a feasible alternative for critical bone defect reconstruction. Nevertheless, longer follow-up is required to determine whether this technique is superior to other forms of fixation.

scholarly journals 5-Year Clinical and Radiographic Results of the Direct Anterior Approach for Total Hip Arthroplasty Using a Collared Cementless Femoral Short-Stem Prosthesis

2022 ◽  
Vol 11 (2) ◽  
pp. 346
Author(s):  
Ali Darwich ◽  
Kim Pankert ◽  
Andreas Ottersbach ◽  
Marcel Betsch ◽  
Sascha Gravius ◽  
...  
Keyword(s):  
Total Hip Arthroplasty ◽  
Clinical Outcome ◽  
Hip Arthroplasty ◽  
Anterior Approach ◽  
Hip Osteoarthritis ◽  
Direct Anterior Approach ◽  
Short Stem ◽  
Total Hip ◽  
The Mean

The aim of this study was to investigate the radiological and clinical outcome of the direct anterior approach (DAA) in total hip arthroplasty (THA) using a collared cementless femoral short-stem. This retrospective study included 124 patients with 135 THAs operated from 2014 to 2016 using a collared cementless triple tapered hydroxyapatite-coated femoral short-stem (AMIStem H Collared®, Medacta International, Castel San Pietro, Switzerland) implanted with a DAA. Follow-up was performed at three months, 12 months, and five years. Clinical outcome was assessed using the hip osteoarthritis outcome score (HOOS) and radiological analysis was done using conventional radiographs, which included evaluation of the femur morphology based on Dorr classification, of radiolucencies based on the Gruen zone classification and of stem subsidence. The mean age was 67.7 ± 11.3 years and the mean body mass index (BMI) was 27.4 ± 4.4 kg/m2. The stem survival rate at five years was 99.1% with one revision due to recurrent dislocations. Mean HOOS score improved from 40.9 ± 18.3 preoperatively to 81.5 ± 19.7 at three months, 89.3 ± 10.9 at 12 months, and 89.0 ± 14.0 at five years (all with p < 0.001). No significant correlations were found between age, femoral bone morphology, BMI and HOOS, and the appearance of relevant radiolucencies.

Sign in / Sign up

Export Citation Format

Share Document