scholarly journals Improved mycelia and polysaccharide production of Grifola frondosa by controlling morphology with microparticle Talc

2018 ◽  
Vol 17 (1) ◽  
Author(s):  
Ting-Lei Tao ◽  
Feng-Jie Cui ◽  
Xiao-Xiao Chen ◽  
Wen-Jing Sun ◽  
Da-Ming Huang ◽  
...  
2019 ◽  
Vol 67 (32) ◽  
pp. 8875-8883 ◽  
Author(s):  
Feng-Jie Cui ◽  
Xi-Hong Wu ◽  
Ting-Lei Tao ◽  
Xin-Yi Zan ◽  
Wen-Jing Sun ◽  
...  

2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Weimin Liu ◽  
Weiwei Yang ◽  
Juan Wu ◽  
Yu Cheng ◽  
Zhencheng Wei ◽  
...  

Mycelial polysaccharides from Grifola frondosa have shown potential for the prevention of chronic diseases. Atmospheric and room temperature plasma (ARTP) technology was used to enhance the ability of G. frondosa to efficiently utilize a mixture of rice bran and wheat bran in the production of mycelial polysaccharides. The ARTP-mutant G. frondosa GFA2 had an improved growth rate of 6.0 mm/d and polysaccharide yield of 2.65 g/L and showed stable genetic characteristics. Uniform design experiments showed that polysaccharide yield could be increased to 5.90 g/L using the optimized conditions of 10.0 g/L rice bran and 110.0 g/L wheat bran while omitting KH2PO4 and MgSO4·7H2O. Gas chromatography demonstrated that GFA2 polysaccharides were composed of the monosaccharides rhamnose, arabinose, fucose, xylose, mannose, glucose, and galactose. This study provides an effective strategy for improving polysaccharide production in edible fungi while proposing the added-value utilization of rice and wheat brans.


BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 2937-2952
Author(s):  
Yi-Cheng Wang ◽  
Fang-Yi Lin ◽  
Tai-Hao Hsu

The effects of nitrogen in the medium on the production of mycelial biomass, extracellular polysaccharides (EPS), and intracellular polysaccharides (IPS) was investigated in submerged cultures of Grifola frondosa. In addition, the effects on pellet morphology were examined. The maximum production levels of mycelial biomass (2.32 g/L), EPS (1.58 g/L), and IPS (29.1 mg/L) were obtained when the nitrogen sources in the medium were yeast extract, malt extract, and peptone, respectively. Using yeast extract as the nitrogen source yielded the maximum mycelial biomass, and morphological characterization revealed a composition of 47% large pellets (fraction L), 20% small pellets (fraction S), and 33% adhesive mycelia (fraction A). The maximum circularity value and the minimum roughness value of the pellets were observed using yeast extract cultures. Both the compactness (0.53) and circularity (0.15) of the pellets were the lowest among the seven types of nitrogen sources, but the roughness (2.86) was the highest in malt extract, which was the nitrogen source that resulted in maximum polysaccharide production. The results revealed that the production levels of mycelial biomass, EPS, and IPS of G. frondosa were associated with changes in pellet morphology due to the source of nitrogen in the medium.


2002 ◽  
Vol 4 (3) ◽  
pp. 11 ◽  
Author(s):  
Sensuke Konno ◽  
Shahrad Aynehchi ◽  
Daniele J. Dolin ◽  
Alec M. Schwartz ◽  
Muhammad S. Choudhury ◽  
...  

2020 ◽  
Vol 25 (6) ◽  
pp. 2033-2044
Author(s):  
CATERINA TOMULESCU ◽  
◽  
MIŞU MOSCOVICI ◽  
ROXANA MĂDĂLINA STOICA ◽  
GABRIEL BUJOR ALBU ◽  
...  

The objective of this work was to optimize the bioprocess parameters, using Klebsiella oxytoca ICCF 419 to obtain an exopolysaccharide based on lactose as substrate. A kinetic study was employed and Logistic and Gompertz models were applied to describe the polysaccharide production, in relation with biomass growth and substrate consumption. The RSM methodology based on Central Composite Rotatable Design was used to evaluate and optimize the effect of lactose, corn extract, KH2PO4 and citric acid concentrations as independent variables on the polysaccharide production, biomass growth and substrate consumption as the response functions. The interaction effects and optimal parameters were obtained using Design Expert Software (version 9.0.6.2). The significance of the variables and their interactions was tested by means of ANOVA analysis with a 99% confidence level. The optimum culture conditions were determined and the model prediction was compared with experimental results. At an initial value of 23.45 for the C/N in the fermentation medium, the strain produces 17.41 g/L of crude polysaccharide and 2.53 g/L dry biomass. The EPS production was significantly influenced by lactose, corn extract and KH2PO4, while the citric acid had no influence. The biomass growth was influenced by the corn extract, KH2PO4 and citric acid.


Sign in / Sign up

Export Citation Format

Share Document