A new innovative real-time tracking method for flying insects applicable under natural conditions

BMC Zoology ◽  
2021 ◽  
Vol 6 (1) ◽  
Author(s):  
Thomas Walter ◽  
Jacqueline Degen ◽  
Keram Pfeiffer ◽  
Anna Stöckl ◽  
Sergio Montenegro ◽  
...  
Keyword(s):  
Real Time ◽  
Animal Movement ◽  
Detection System ◽  
Short Wave ◽  
New Method ◽  
Striking Difference ◽  
Lead Sulphide ◽  
Flying Insects ◽  
Real Time Tracking ◽  
Matrix Detector

Abstract Background Sixty percent of all species are insects, yet despite global efforts to monitor animal movement patterns, insects are continuously underrepresented. This striking difference between species richness and the number of species monitored is not due to a lack of interest but rather to the lack of technical solutions. Often the accuracy and speed of established tracking methods is not high enough to record behavior and react to it experimentally in real-time, which applies in particular to small flying animals. Results Our new method of real-time tracking relates to frequencies of solar radiation which are almost completely absorbed by traveling through the atmosphere. For tracking, photoluminescent tags with a peak emission (1400 nm), which lays in such a region of strong absorption through the atmosphere, were attached to the animals. The photoluminescent properties of passivated lead sulphide quantum dots were responsible for the emission of light by the tags and provide a superb signal-to noise ratio. We developed prototype markers with a weight of 12.5 mg and a diameter of 5 mm. Furthermore, we developed a short wave infrared detection system which can record and determine the position of an animal in a heterogeneous environment with a delay smaller than 10 ms. With this method we were able to track tagged bumblebees as well as hawk moths in a flight arena that was placed outside on a natural meadow. Conclusion Our new method eliminates the necessity of a constant or predictable environment for many experimental setups. Furthermore, we postulate that the developed matrix-detector mounted to a multicopter will enable tracking of small flying insects, over medium range distances (>1000m) in the near future because: a) the matrix-detector equipped with an 70 mm interchangeable lens weighs less than 380 g, b) it evaluates the position of an animal in real-time and c) it can directly control and communicate with electronic devices.

scholarly journals Real-time tracking of neighborhood surroundings and mood in urban drug misusers: Application of a new method to study behavior in its geographical context

2014 ◽  
Vol 134 ◽  
pp. 22-29 ◽  
Author(s):  
David H. Epstein ◽  
Matthew Tyburski ◽  
Ian M. Craig ◽  
Karran A. Phillips ◽  
Michelle L. Jobes ◽  
...  
Keyword(s):  
Real Time ◽  
New Method ◽  
Study Behavior ◽  
Real Time Tracking ◽  
Geographical Context

An Overview of Data Aggregation Architecture for Real-Time Tracking with Sensor Networks

2006 ◽  
Author(s):  
Tian He ◽  
Lin Gu ◽  
Liqian Luo ◽  
Ting Yan ◽  
John A. Stankovic ◽  
...  
Keyword(s):  
Sensor Networks ◽  
Real Time ◽  
Data Aggregation ◽  
Real Time Tracking

Real-time Detection of Aortic Valve in Echocardiography using Convolutional Neural Networks

2020 ◽  
Vol 16 (5) ◽  
pp. 584-591 ◽  
Author(s):  
Muhammad Hanif Ahmad Nizar ◽  
Chow Khuen Chan ◽  
Azira Khalil ◽  
Ahmad Khairuddin Mohamed Yusof ◽  
Khin Wee Lai
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Heart Disease ◽  
Aortic Valve ◽  
Real Time ◽  
Convolutional Neural Networks ◽  
Valvular Heart Disease ◽  
Detection System ◽  
Processing Unit ◽  
Real Time Detection

Background: Valvular heart disease is a serious disease leading to mortality and increasing medical care cost. The aortic valve is the most common valve affected by this disease. Doctors rely on echocardiogram for diagnosing and evaluating valvular heart disease. However, the images from echocardiogram are poor in comparison to Computerized Tomography and Magnetic Resonance Imaging scan. This study proposes the development of Convolutional Neural Networks (CNN) that can function optimally during a live echocardiographic examination for detection of the aortic valve. An automated detection system in an echocardiogram will improve the accuracy of medical diagnosis and can provide further medical analysis from the resulting detection. Methods: Two detection architectures, Single Shot Multibox Detector (SSD) and Faster Regional based Convolutional Neural Network (R-CNN) with various feature extractors were trained on echocardiography images from 33 patients. Thereafter, the models were tested on 10 echocardiography videos. Results: Faster R-CNN Inception v2 had shown the highest accuracy (98.6%) followed closely by SSD Mobilenet v2. In terms of speed, SSD Mobilenet v2 resulted in a loss of 46.81% in framesper- second (fps) during real-time detection but managed to perform better than the other neural network models. Additionally, SSD Mobilenet v2 used the least amount of Graphic Processing Unit (GPU) but the Central Processing Unit (CPU) usage was relatively similar throughout all models. Conclusion: Our findings provide a foundation for implementing a convolutional detection system to echocardiography for medical purposes.

scholarly journals Power-Based Non-Intrusive Condition Monitoring for Terminal Device in Smart Grid

Sensors ◽  
2020 ◽  
Vol 20 (13) ◽  
pp. 3635 ◽  
Author(s):  
Guoming Zhang ◽  
Xiaoyu Ji ◽  
Yanjie Li ◽  
Wenyuan Xu
Keyword(s):  
Smart Grid ◽  
Power Consumption ◽  
Real Time ◽  
Condition Monitoring ◽  
Resource Constraints ◽  
Detection System ◽  
Stable Operation ◽  
Detection Accuracy ◽  
Monitoring Method ◽  
Dsp Processors

As a critical component in the smart grid, the Distribution Terminal Unit (DTU) dynamically adjusts the running status of the entire smart grid based on the collected electrical parameters to ensure the safe and stable operation of the smart grid. However, as a real-time embedded device, DTU has not only resource constraints but also specific requirements on real-time performance, thus, the traditional anomaly detection method cannot be deployed. To detect the tamper of the program running on DTU, we proposed a power-based non-intrusive condition monitoring method that collects and analyzes the power consumption of DTU using power sensors and machine learning (ML) techniques, the feasibility of this approach is that the power consumption is closely related to the executing code in CPUs, that is when the execution code is tampered with, the power consumption changes accordingly. To validate this idea, we set up a testbed based on DTU and simulated four types of imperceptible attacks that change the code running in ARM and DSP processors, respectively. We generate representative features and select lightweight ML algorithms to detect these attacks. We finally implemented the detection system on the windows and ubuntu platform and validated its effectiveness. The results show that the detection accuracy is up to 99.98% in a non-intrusive and lightweight way.

scholarly journals Enhancing spatial perception through sound: mapping human movements into MIDI

2021 ◽  
Author(s):  
Bernardo Breve ◽  
Stefano Cirillo ◽  
Mariano Cuofano ◽  
Domenico Desiato
Keyword(s):  
Real Time ◽  
User Study ◽  
Spatial Perception ◽  
Human Movements ◽  
Different Types ◽  
Real Time Tracking ◽  
People’S Perceptions ◽  
Novel Algorithm

AbstractGestural expressiveness plays a fundamental role in the interaction with people, environments, animals, things, and so on. Thus, several emerging application domains would exploit the interpretation of movements to support their critical designing processes. To this end, new forms to express the people’s perceptions could help their interpretation, like in the case of music. In this paper, we investigate the user’s perception associated with the interpretation of sounds by highlighting how sounds can be exploited for helping users in adapting to a specific environment. We present a novel algorithm for mapping human movements into MIDI music. The algorithm has been implemented in a system that integrates a module for real-time tracking of movements through a sample based synthesizer using different types of filters to modulate frequencies. The system has been evaluated through a user study, in which several users have participated in a room experience, yielding significant results about their perceptions with respect to the environment they were immersed.

Sign in / Sign up

Export Citation Format

Share Document