scholarly journals Differences in preoperative planning for high-tibial osteotomy between the standing and supine positions

2021 ◽  
Vol 33 (1) ◽  
Author(s):  
Takehiko Matsushita ◽  
Shu Watanabe ◽  
Daisuke Araki ◽  
Kanto Nagai ◽  
Yuichi Hoshino ◽  
...  
Keyword(s):  
Regression Analysis ◽  
High Tibial Osteotomy ◽  
Preoperative Planning ◽  
Tibial Osteotomy ◽  
Correction Angle ◽  
Significant Difference ◽  
Angle Difference ◽  
The Mean ◽  
The Difference ◽  
Single Regression

Abstract Introduction Previous studies have reported that alignment changes depend on the patient’s position in orthopedic surgery. However, it has not yet been well examined how the patient’s position affects the preoperative planning in high-tibial osteotomy (HTO). Therefore, the aim of this study was to investigate the effects of the patient’s position on preoperative planning in HTO. Materials and methods A total of 60 knees in 55 patients who underwent HTO were retrospectively examined. Virtual preoperative planning for medial open-wedge HTO (OWHTO), lateral closed-wedge HTO (CWHTO), and hybrid CWHTO were performed by setting the percentage of the weight-bearing line (%WBL) at 62% as an optimal alignment. The correction angle differences between the supine and standing radiographs were measured. The virtual %WBL (v%WBL) was determined by applying the correction angle obtained from the standing radiograph to the supine radiograph. The %WBL discrepancy (%WBLd) was calculated as v%WBL − 62 (%) to predict the possible correction errors during surgeries. A single regression analysis was performed to examine the correlation between the correction angle difference and %WBLd. Results The mean correction angle was significantly higher when the preoperative planning was based on standing radiographs than when based on supine radiographs (P < 0.001), and the mean difference was 2.2 ± 1.5°. The difference between the two conditions in the medial opening gaps for OWHTO, lateral wedge sizes (mm) for CWHTO, and hybrid CWHTO were 2.6 ± 2.0, 2.3 ± 1.6, and 1.9 ± 1.4, respectively. The mean v%WBL was 71.2% ± 7.3%, and the mean %WBLd was 10.1% ± 7.4%. A single regression analysis revealed a linear correlation between the correction angle difference and %WBLd (%WBLd = 4.72 × correction angle difference + 0.08). No statistically significant difference in the parameters was found between the supine and standing radiographs postoperatively. Conclusions We found significant differences in the estimated correction angles between the supine and standing radiographs in the planning for HTO. Therefore, surgeons should carefully consider the difference between supine and standing radiographs and estimate the possible correction error during surgery when planning a HTO.

scholarly journals The ratio of mechanical axis shift to the correction angle differs in preoperative planning, but actual postoperative alignment is comparable between opening wedge and closed wedge high tibial osteotomy

2020 ◽  
Author(s):  
Takahiro Ogino ◽  
Ken Kumagai ◽  
Shunsuke Yamada ◽  
Tomotaka Akamatsu ◽  
Shuntaro Nejima ◽  
...  
Keyword(s):  
High Tibial Osteotomy ◽  
Preoperative Planning ◽  
Mechanical Axis ◽  
Tibial Osteotomy ◽  
Axis Deviation ◽  
Opening Wedge ◽  
Correction Angle ◽  
Closed Wedge ◽  
Significant Difference ◽  
Wedge High Tibial Osteotomy

Abstract Background The purpose of this study was to investigate the relationship between the bony correction angle and mechanical axis change and their differences between closed wedge high tibial osteotomy (CWHTO) and open wedge high tibial osteotomy (OWHTO). Methods: A total of 100 knees of 89 patients who underwent OWHTO (50 knees) or CWHTO (50 knees) were investigated. The femorotibial angle (FTA), % mechanical axis deviation (MAD), % anatomical tibial axis deviation (ATAD), % mechanical tibial axis deviation (MTAD), mechanical medial proximal tibial angle (mMPTA), and joint line convergence angle (JLCA) were measured on preoperative and postoperative radiographs. The amount of change from preoperative to postoperative in each measurement is represented as Δ. Results: CWHTO resulted in a greater increase of Δ(%MTAD - %ATAD)/ΔmMPTA than OWHTO (P<0.05), and a greater decrease of ΔJLCA/ΔmMPTA than OWHTO (P<0.05). However, no significant difference was found in the Δ%MAD/ΔmMPTA between CWHTO and OWHTO. When the osteotomy was planned with the same bony correction angle, %MA passed more laterally in OWHTO than in CWHTO (P<0.05). These results suggested a lesser valgus bony correction ratio due to greater medial shift of the tibial axis and greater valgus compensation of the soft tissue in CWHTO compared to OWHTO. Conclusions: The ratio of mechanical axis shift to the correction angle differed in preoperative planning, but postoperative alignment was comparable between opening wedge and closed wedge high tibial osteotomy.

scholarly journals Preoperative planning by osteotomy master software helps to improve the accuracy of target limb alignment in high tibial osteotomy

2020 ◽  
Vol 15 (1) ◽  
Author(s):  
Axiang He ◽  
Yanjie Mao ◽  
Ying Zhou ◽  
Qin Kong ◽  
Hui zhang ◽  
...  
Keyword(s):  
Blood Loss ◽  
High Tibial Osteotomy ◽  
Preoperative Planning ◽  
Operation Time ◽  
Control Group ◽  
Tibial Osteotomy ◽  
Observation Group ◽  
Limb Alignment ◽  
Correction Angle ◽  
Significant Difference

Abstract Background The accuracy of targeted lower limb alignment correction following HTO is closely related to patients’ pain relief and knee joint survival time. How to accurately perform osteotomy and how to obtain the ideal target limb alignment to maximize the curative effect are the difficulty in HTO practice. The purpose of this study is to evaluate the predictive and application value of osteotomy master software (OsteoMaster) in coronal plane preoperative planning of high tibial osteotomy. Method Sixty-seven patients with medial compartment osteoarthritis and varus deformity treated by medial open-weight high tibial osteotomy were enrolled and divided into observation group (31 cases) and control group (36 cases). The observation group was planned by OsteoMaster, while the control group was planned by Miniaci. The preoperative predicted values of osteotomy depth, open height, correction angle, WBL ratio, and FTA of the observation group were compared with the actual intraoperative values to study their accuracy. The operative time, blood loss, number of fluoroscopy, and WBL ratio were compared between the observation group and the control group to study its application value. Result There was no significant difference between two groups in preoperative prediction and intraoperative reality of osteotomy depth, open height, correction angle, FTA, and WBL ratio (P > 0.05). The operation time and number of fluoroscopy in the observation group were significantly less than those in the control group (P < 0.05), while the difference in blood loss was not statistically significant (P > 0.05). The good rate of WBL ratio was 87.1% in the observation group and 75% in the control group. Conclusion OsteoMaster has predictive value in osteotomy depth, open height, correction angle, FTA, and WBL ratio of HTO, which is also helpful to reduce the number of fluoroscopy, shorten the operation time, and improve the accuracy of target limb alignment. The drawback of this approach is 2-dimensional approach in contrast to 3-dimensional preoperative planning that is including the more real study.

scholarly journals Relationship between the correction angle in medial open wedge high tibial osteotomy and the postoperative state of patellofemoral cartilage

2020 ◽  
Author(s):  
Chong-Hyuk Choi ◽  
Min Jung ◽  
Sung-Hwan Kim ◽  
Sang-Hee Kim ◽  
Tae-Hwan Yoon
Keyword(s):  
High Tibial Osteotomy ◽  
Patellofemoral Joint ◽  
Group Versus ◽  
International Knee Documentation Committee ◽  
Cartilage Degeneration ◽  
Tibial Osteotomy ◽  
Open Wedge ◽  
Correction Angle ◽  
Significant Difference ◽  
Wedge High Tibial Osteotomy

Abstract Background: To investigate clinical and radiologic effects of medial open wedge high tibial osteotomy (MOWHTO) on the patellofemoral joint in relation to the correction angle by comparing changes in cartilage from before to after the surgery. Methods: A total of 124 MOWHTO cases were divided into the three groups of small, moderate, and large, depending on the correction angle. Clinical and radiologic outcomes were compared at the mean follow-up time of 38.8 months. Postoperative cartilage changes were assessed during implant removal completed at two years after MOWHTO. Results: There was no significant difference evident in most clinical outcomes measured, including Lysholm score and the Knee Injury and Osteoarthritis Outcome score subscales, with the exception of postoperative Shelbourne and Trumper score between the groups (P< 0.001). International Knee Documentation Committee scale value on radiologic evaluation did not significantly differ among the groups. A progression of cartilage degeneration was noted in 40.3% of femoral trochleas and 22.6% of patellas. Cartilage degeneration was significantly progressed in the large correction angle group versus in the other two groups. Regression analysis showed that the correction angle had a significant effect on cartilage deterioration (Trochela, P=0.009; Patella, P=0.034). Conclusion: Patellofemoral joint was more adversely affected by MOWHTO in conjunction with the requirement of a larger correction angle. Thus, cases necessitating considerable correction should be forewarned of patellofemoral joint symptoms within a relatively short time after the procedure. Keywords: medial open wedge high tibial osteotomy, osteoarthritis, patellofemoral arthritis, correction angle

Comparison of the Functional and Radiological Outcomes of Single- and Two-Stage Bilateral Open Wedge High Tibial Osteotomy

2021 ◽  
Author(s):  
Vahdet Uçan ◽  
Orkhan Aliyev ◽  
Cemil Burak Demirkiran ◽  
Fatih Yildiz ◽  
Nurzat Elmali ◽  
...  
Keyword(s):  
High Tibial Osteotomy ◽  
Oxford Knee Score ◽  
Tibial Slope ◽  
Tibial Osteotomy ◽  
Two Stage ◽  
Total Hospital Stay ◽  
Estimated Blood Loss ◽  
Significant Difference ◽  
Wedge High Tibial Osteotomy ◽  
The Mean

Abstract Purpose This study compared the functional and radiological outcomes and complications of single- (SS) and two-stage (TS) bilateral high tibial osteotomy (HTO). Methods From 2014 to 2018, 48 patients underwent bilateral HTO surgery for osteoarthritis. The outcomes of SS in 28 knees and TS in 32 knees were compared using the Knee Injury and Osteoarthritis Outcome Score (KOOS) and Oxford Knee Score (OKS) as functional outcomes, and the medial proximal tibial (MPTA), hip-knee-ankle (HKA), tibial slope (TSA) angles, and mechanical axis deviation (MAD) as radiological outcomes. We also evaluated the estimated blood loss (EBL). Results No significant differences in the pre- and postoperative mean OKS and KOOS were found between the groups. There was a significant difference between the groups in the last postoperative HKA angle (− 0.9 ± 3.9 and 1.8 ± 4.3°, respectively). In SS and TS, the respective total mean surgical time was 108 ± 28 and 143 ± 36 min (p < 0.001). The mean calculated EBL was 612 ± 267 and 544 ± 357 mL, respectively, (p = 0.5), and the mean length of stay (LOS) was 2.2 ± 0.83 and 3.5 ± 1.0 days, respectively, (p = 0.01). Conclusion SS bilateral HTO is a safe reasonable option for certain patients with bilateral knee osteoarthritis because it involves a single hospitalization, one-time exposure to anesthesia risks, accelerated rehabilitation, earlier return to expected life status, reduced total hospital stay, and a likely decrease in total cost.

Are Navigation Systems Accurate Enough to Predict the Correction Angle During High Tibial Osteotomy?

2013 ◽  
Vol 41 (10) ◽  
pp. 2368-2374 ◽  
Author(s):  
Bong Soo Kyung ◽  
Jae Gyoon Kim ◽  
Ki-Mo Jang ◽  
Minho Chang ◽  
Young-Wan Moon ◽  
...  
Keyword(s):  
High Tibial Osteotomy ◽  
Tibial Osteotomy ◽  
Navigation Systems ◽  
Correction Angle

scholarly journals Comparative Analysis of Different Local Anesthetic Solutions Available in Market: An In Vitro and Clinical Study

2021 ◽  
Author(s):  
Eisha Imran ◽  
Faisal Moeen ◽  
Beenish Abbas ◽  
Bakhtawar Yaqoob ◽  
Mehreen Wajahat ◽  
...  
Keyword(s):  
Comparative Analysis ◽  
Local Anesthetic ◽  
Compositional Analysis ◽  
Bacterial Activity ◽  
Similar Composition ◽  
Ph Values ◽  
Significant Difference ◽  
The Mean ◽  
The Difference

Abstract Objectives The study aimed to evaluate and compare various commercially available local anesthetic solutions. Materials and Methods A total of 150 commercially available local anesthetic cartridges of similar composition (2% lidocaine with epinephrine 1:100,000) were randomly collected and divided into 3 groups. The designations of groups were selected from their product names such that each group consisted of 60 cartridges. Group S (Septodont, France) Group M (Medicaine, Korea) and Group H (HD-Caine, Pakistan). The samples were divided into five sub-groups, each consisting of 10 cartridges from each group to investigate each parameter. Results The acquired data was statistically analyzed and compared (using SPSS version 12). Compositional analysis revealed a non-significant (P>0.05) difference when the three Groups were compared with standard lidocaine and epinephrine solutions. The mean pH values of samples from group S, M and H respectively fell within the range of pH values of commercially available solutions. Non-significant difference in EPT values of Group S and H was found when efficacy was compared (p = 0.3), however a significant difference (p < 0.01) was observed in contrast to Group M. Anti-bacterial activity was observed in all the group and a non-significant difference in cell viability values of Group S and M was found (p = 0.6), while the difference was significant in comparison to Group H. Conclusion Within the limitations of these investigations, it appears that the properties of different manufacturers fall within the recommended ranges as mentioned in literature and do not appear to be statistically different in the variables we have tested.

Open-wedge high tibial osteotomy in patients with discoid lateral meniscus

2021 ◽  
Vol 29 (2) ◽  
pp. 230949902110173
Author(s):  
Hee-June Kim ◽  
Ji-Yeon Shin ◽  
Hyun-Joo Lee ◽  
Chul-Hee Jung ◽  
Kyeong-Hyeon Park ◽  
...  
Keyword(s):  
High Tibial Osteotomy ◽  
Lateral Meniscus ◽  
Lateral Compartment ◽  
Clinical Results ◽  
Discoid Lateral Meniscus ◽  
Tibial Osteotomy ◽  
Open Wedge ◽  
Factors Affecting ◽  
The Mean ◽  
Open Wedge Hto

Background: There are concerns about the progression of the lateral osteoarthritis (OA) should be taken into account when high tibial osteotomy (HTO) is performed in patients with discoid lateral meniscus (LM). This study evaluated the clinical results of HTO in patients with discoid LM and elucidated factors affecting the results. Methods: This study evaluated 32 female patients with varus deformity and medial OA. Patients with discoid LM (8 patients) or without discoid LM (24 patients) underwent open-wedge HTO. The mean age was 53.5 years and the mean follow-up period was 35 months. Clinical results, including the Hospital for Special Surgery (HSS) score, Knee Society knee score (KS) and function score (FS), were evaluated. The progression of OA in the lateral compartment was also evaluated. Finally, we evaluated the factors affecting the clinical results and OA progression in the lateral compartment. Results: Between two groups, all clinical scores were not different (p = 0.964, 0.963, and 0.559, respectively). Three of eight patients (37.5%) in the discoid group developed OA in the lateral compartment, whereas 2 of 24 patients (8.3%) in the control group developed such; however, this was not significantly different (p = 0.085). In discoid group, patients with undercorrection has higher KS relative to patients with acceptable correction (p = 0.044). Other clinical results and OA change in the lateral compartment were not affected by evaluated factors. Conclusions: Patients who underwent open-wedge HTO showed the satisfactory clinical results and lateral OA progression regardless of the presence or absence discoid LM. However, when discoid LM was present, patients with undercorrection showed higher KS in comparison with patients with acceptable correction.

Analysis of the breeding records of a herd of pigs

1954 ◽  
Vol 45 (1) ◽  
pp. 19-27 ◽  
Author(s):  
R. Braude ◽  
P. M. Clarke ◽  
K. G. Mitchell
Keyword(s):  
Statistical Analysis ◽  
Large White ◽  
Seasonal Differences ◽  
Significant Difference ◽  
The Mean ◽  
The Difference ◽  
Length Of Gestation

1. A survey and. statistical analysis of the records of litters born in the N.I.R.D. herd of Large White pigs over a period of 16 years are presented.2. The mean length of gestation was 114 days for both gilts and sows.3. The mean numbers of pigs born alive and born dead per litter from gilts, 10·0 and 0·2 respectively, were both significantly smaller than the corresponding figures for sows, 11·8 and O·8. No seasonal differences were found.4. The mean total losses of pigs from birth to weaning at 8 weeks were 29·5% of pigs born alive. The losses in litters from gilts, 23·0%, were significantly smaller than in litters from sows, 31·0%. The losses during the winter months both for gilts, 32·5%, and for sows, 35·9%, were significantly higher than during the summer months, 19·4% and 26·7% for gilts and sows respectively.5. Over 50% of the total losses were due to crushing by the dam, 74·1% of the losses from this cause occurring during the first 48 hr. after birth.6. The mean number of pigs weaned per litter was 8·0. The difference between the number weaned per litter from gilts, 7·7, and per litter from number of pigs was weaned per litter from sows during the summer months, 8·7, than during the winter months, 7·4.7. There was no significant difference between the number of male and of female pigs weaned.8. The mean weight at weaning was 29·9 lb., male pigs, 30·3 lb., being significantly heavier than females, 29·51b. Pigs in litters from gilts, 27·81b., were significantly lighter at weaning than those from sows, 30·0 lb., and for both gilts and sows, pigs reared during the summer months, 29·7 and 31·8 lb. respectively, were significantly heavier than those reared during the winter months, 25·9 and 28·2 lb. respectively.

Assessing the Local Mechanical Environment in Medial Opening Wedge High Tibial Osteotomy Using Finite Element Analysis

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
Yves Pauchard ◽  
Todor G. Ivanov ◽  
David D. McErlain ◽  
Jaques S. Milner ◽  
J. Robert Giffin ◽  
...  
Keyword(s):  
Finite Element ◽  
High Tibial Osteotomy ◽  
Volume Fraction ◽  
Compressive Strain ◽  
Tibial Osteotomy ◽  
Fe Modeling ◽  
Knee Alignment ◽  
Mechanical Environment ◽  
Significant Difference ◽  
Subject Specific

High-tibial osteotomy (HTO) is a surgical technique aimed at shifting load away from one tibiofemoral compartment, in order the reduce pain and progression of osteoarthritis (OA). Various implants have been designed to stabilize the osteotomy and previous studies have been focused on determining primary stability (a global measure) that these designs provide. It has been shown that the local mechanical environment, characterized by bone strains and segment micromotion, is important in understanding healing and these data are not currently available. Finite element (FE) modeling was utilized to assess the local mechanical environment provided by three different fixation plate designs: short plate with spacer, long plate with spacer and long plate without spacer. Image-based FE models of the knee were constructed from healthy individuals (N = 5) with normal knee alignment. An HTO gap was virtually added without changing the knee alignment and HTO implants were inserted. Subsequently, the local mechanical environment, defined by bone compressive strain and wedge micromotion, was assessed. Furthermore, implant stresses were calculated. Values were computed under vertical compression in zero-degree knee extension with loads set at 1 and 2 times the subject-specific body weight (1 BW, 2 BW). All studied HTO implant designs provide an environment for successful healing at 1 BW and 2 BW loading. Implant von Mises stresses (99th percentile) were below 60 MPa in all experiments, below the material yield strength and significantly lower in long spacer plates. Volume fraction of high compressive strain ( > 3000 microstrain) was below 5% in all experiments and no significant difference between implants was detected. Maximum vertical micromotion between bone segments was below 200 μm in all experiments and significantly larger in the implant without a tooth. Differences between plate designs generally became apparent only at 2 BW loading. Results suggest that with compressive loading of 2 BW, long spacer plates experience the lowest implant stresses, and spacer plates (long or short) result in smaller wedge micromotion, potentially beneficial for healing. Values are sensitive to subject bone geometry, highlighting the need for subject-specific modeling. This study demonstrates the benefits of using image-based FE modeling and bone theory to fine-tune HTO implant design.

scholarly journals Influence of Apical Patency and Cleaning of the Apical Foramen on Periapical Extrusion in Retreatment

2013 ◽  
Vol 24 (5) ◽  
pp. 482-486 ◽  
Author(s):  
Marili Doro Andrade Deonizio ◽  
Gilson Blitzkow Sydney ◽  
Antonio Batista ◽  
Roberto Pontarolo ◽  
Paulo Ricardo Bittencourt Guimarães ◽  
...  
Keyword(s):  
Material Removal ◽  
Filling Material ◽  
Mean Values ◽  
Filtration System ◽  
Root Canal Retreatment ◽  
Significant Difference ◽  
Before And After ◽  
The Mean ◽  
The Difference ◽  
Removal Technique

This study evaluated the influence of apical patency, root filling removal technique and cleaning of the apical foramen, concerning the amount of debris extruded during root canal retreatment. Forty mandibular incisors were randomly assigned to 4 groups - GIM (n=10), GIIM (n=10), GIPT (n=10) and GIIPT (n=10), which were named according to leaving (I) or not (II) apical patency during canal preparation and filling removal technique (manual - M or ProTaper system - PT). After filling material removal, each specimen of each group had the apical foramen cleaned by sizes 15, 20 and 25 instruments, generating 12 subgroups: GIM15, GIM20, GIM25, GIIM15, GIIM20, GIIM25, GIPT15, GIPT20, GIPT25, GIIPT15, GIIPT20 and GIIPT25. Extruded filling debris was collected by a Milipore filtration system, an HV-durapore, 0.45 µm pore filter with a 25 mm diameter. The filters were weighed before and after the collection on an analytical scale (10–5 g), and the difference was calculated. The mean weight of extruded filling debris was analyzed statistically by Kruskal-Wallis and Friedman ANOVA tests (α=0.05). The mean values found in the groups (in mg) were: GIM (0.95±0.94), GIIM (0.47±0.62), GIPT (0.30±0.31) and GIIPT (0.32±0.44). There was no statistically significant difference among any of the groups or subgroups (p>0.05). ProTaper provided the smallest amount of extruded filling material, regardless of presence or absence of apical patency, followed by manual technique, without and with apical patency. Additional amounts of debris were collected during cleaning of the apical foramen, regardless of the instrument, presence/absence of patency or root filling removal technique.

Sign in / Sign up

Export Citation Format

Share Document