LONG‐PERIOD SIGNAL PROCESSING RESULTS FOR THE LARGE APERTURE SEISMIC ARRAY

Geophysics ◽  
1969 ◽  
Vol 34 (3) ◽  
pp. 305-329 ◽  
Author(s):  
J. Capon ◽  
R. J. Greenfield ◽  
R. T. Lacoss
Keyword(s):  
Signal Processing ◽  
Surface Wave ◽  
Maximum Likelihood ◽  
Surface Waves ◽  
Body Wave ◽  
Seismic Array ◽  
Seismic Events ◽  
Long Period ◽  
Large Aperture ◽  
Period Data

The results of a series of off‐line signal processing experiments are presented for long‐period data obtained from the Large Aperture Seismic Array (LASA) located in eastern Montana. The signal‐to‐noise ratio gains obtained with maximum‐likelihood processing, as well as other simpler forms of processing, are presented for body‐wave as well as surface‐wave phases. A discussion of the frequency‐wavenumber characteristics of the noise which led to these results is also given. On the basis of these experiments, several recommendations are made concerning optimum long‐period array configurations and on‐line or off‐line processing methods. The usefulness of maximum‐likelihood processing in suppressing an interfering teleseism is demonstrated. An experiment is given in which maximum‐likelihood processing achieved about 20 db suppression of an interfering teleseism, while simpler forms of processing such as beam‐forming obtained about 11 db. The matched filtering of surface waves using chirp waveforms is shown to be highly effective. A useful discriminant for distinguishing between natural seismic events and underground nuclear explosions, using both the long‐period and short‐period data, was found to be the relationship between the surface‐wave and body‐wave magnitudes. Measurements of this discriminant made on events from four tectonic regions of the earth are presented. It is shown that 60 and 100 percent detectability of surface waves for natural seismic events from the Central Asian‐Kurile Islands‐Kamchatka region occurs at about LASA body‐wave magnitudes 4.5 and 4.9, respectively.

Large Explosions at Sea

1971 ◽  
Vol 8 (2) ◽  
pp. 243-247
Author(s):  
Goetz G. R. Buchbinder
Keyword(s):  
Surface Wave ◽  
Continental Shelf ◽  
Surface Waves ◽  
Small Amplitude ◽  
Body Wave ◽  
Surface Wave Magnitude ◽  
Underwater Explosions ◽  
Long Period ◽  
Short Period ◽  
The Difference

Two large unannounced events occurred at sea in aseismic areas in the Atlantic. Comparison of these with the announced event Chase III shows them to be explosions.Large explosions at sea may be recognized by the relatively small amplitude of long period surface waves with periods up to 10 s. Energy of longer periods is absent for events mb ≤ 5.5. The surface wave magnitudes for the events are at least 1.5 smaller at 10 s than those of underground explosions of equal mb, at 20 s they are at least 0.9 smaller. At longer periods the difference between body wave and surface wave magnitude is larger than 0.9 but larger explosions are needed to determine the separation. Underwater explosions on or near the continental shelf are very efficient in the generation of higher mode short period waves.

A surface wave particle motion discrimination process

1968 ◽  
Vol 58 (2) ◽  
pp. 629-637
Author(s):  
R. S. Simons
Keyword(s):  
Surface Wave ◽  
Surface Waves ◽  
Particle Motion ◽  
Seismic Data ◽  
Digital Computer ◽  
Rayleigh Waves ◽  
Motion Pattern ◽  
Signal To Noise ◽  
Long Period ◽  
Period Data

Abstract A digital computer process is described which examines the three-componen particle-motion pattern of seismic data as a function of frequency and uses this information to discriminate against all motion except surface waves arriving from some pre-assigned direction. Application of the process to long-period data has shown that it can substantially improve the signal-to-noise ratios of Love and Rayleigh waves from earthquakes and underground detonations.

A method for relocating seismic events using surface waves

1973 ◽  
Vol 63 (4) ◽  
pp. 1305-1313
Author(s):  
S. T. Crough ◽  
R. Van der Voo
Keyword(s):  
Surface Wave ◽  
Surface Waves ◽  
Group Velocity ◽  
Group Velocity Dispersion ◽  
Body Wave ◽  
Test Site ◽  
Seismic Events ◽  
Computer Technique ◽  
Nuclear Explosions ◽  
Reference Event

abstract Seismic events can be relocated relative to a reference event by using the group-velocity dispersion curves of surface waves. Since group velocity is a function of the travel path, surface waves from two events in the same locale should show identical group velocities when viewed at any one seismograph station. A computer technique has been developed for comparing the group-velocity curves of any event with the curves of a reference event and for determining the relocation which causes the curves to best coincide. The method is evaluated by relocating eight intermediate-size nuclear explosions of the Nevada Test Site series. With precise curve fitting, the surface-wave locations are slightly more accurate in southern Nevada than the standard body-wave determinations. The surface-wave origin times are considerably more accurate. In areas of sparse station coverage or of many small earthquakes, the surface-wave method can be expected to improve seismic locations significantly.

Guided Surface Waves on an Elastic Half Space

1971 ◽  
Vol 38 (4) ◽  
pp. 899-905 ◽  
Author(s):  
L. B. Freund
Keyword(s):  
Wave Propagation ◽  
Surface Wave ◽  
Surface Waves ◽  
Half Space ◽  
Body Wave ◽  
Three Dimensional ◽  
Elastic Half Space ◽  
Normal Displacement ◽  
Rigid Barrier ◽  
Wave Disturbances

Three-dimensional wave propagation in an elastic half space is considered. The half space is traction free on half its boundary, while the remaining part of the boundary is free of shear traction and is constrained against normal displacement by a smooth, rigid barrier. A time-harmonic surface wave, traveling on the traction free part of the surface, is obliquely incident on the edge of the barrier. The amplitude and the phase of the resulting reflected surface wave are determined by means of Laplace transform methods and the Wiener-Hopf technique. Wave propagation in an elastic half space in contact with two rigid, smooth barriers is then considered. The barriers are arranged so that a strip on the surface of uniform width is traction free, which forms a wave guide for surface waves. Results of the surface wave reflection problem are then used to geometrically construct dispersion relations for the propagation of unattenuated guided surface waves in the guiding structure. The rate of decay of body wave disturbances, localized near the edges of the guide, is discussed.

Surface wave attenuation of seismic records with the co-core trace transform filter

Geophysics ◽  
2011 ◽  
Vol 76 (6) ◽  
pp. V115-V128 ◽  
Author(s):  
Ning Wu ◽  
Yue Li ◽  
Baojun Yang
Keyword(s):  
Surface Wave ◽  
Surface Waves ◽  
Field Data ◽  
Wave Attenuation ◽  
Seismic Events ◽  
Data Sets ◽  
Transform Domain ◽  
Recent Developments ◽  
Seismic Records ◽  
Trace Transform

To remove surface waves from seismic records while preserving other seismic events of interest, we introduced a transform and a filter based on recent developments in image processing. The transform can be seen as a weighted Radon transform, in particular along linear trajectories. The weights in the transform are data dependent and designed to introduce large amplitude differences between surface waves and other events such that surface waves could be separated by a simple amplitude threshold. This is a key property of the filter and distinguishes this approach from others, such as conventional ones that use information on moveout ranges to apply a mask in the transform domain. Initial experiments with synthetic records and field data have demonstrated that, with the appropriate parameters, the proposed trace transform filter performs better both in terms of surface wave attenuation and reflected signal preservation than the conventional methods. Further experiments on larger data sets are needed to fully assess the method.

Effects of centroid location on determination of earthquake mechanisms using long-period surface waves

1990 ◽  
Vol 80 (5) ◽  
pp. 1205-1231
Author(s):  
Jiajun Zhang ◽  
Thorne Lay
Keyword(s):  
Surface Wave ◽  
Rayleigh Waves ◽  
Body Wave ◽  
Moment Tensor ◽  
Source Location ◽  
P Wave ◽  
Nodal Plane ◽  
Wave Source ◽  
Long Period

Abstract Determination of shallow earthquake source mechanisms by inversion of long-period (150 to 300 sec) Rayleigh waves requires epicentral locations with greater accuracy than that provided by routine source locations of the National Earthquake Information Center (NEIC) and International Seismological Centre (ISC). The effects of epicentral mislocation on such inversions are examined using synthetic calculations as well as actual data for three large Mexican earthquakes. For Rayleigh waves of 150-sec period, an epicentral mislocation of 30 km introduces observed source spectra phase errors of 0.6 radian for stations at opposing azimuths along the source mislocation vector. This is larger than the 0.5-radian azimuthal variation of the phase spectra at the same period for a thrust fault with 15° dip and 24-km depth. The typical landward mislocation of routinely determined epicenters of shallow subduction zone earthquakes causes source moment tensor inversions of long-period Rayleigh waves to predict larger fault dip than indicated by teleseismic P-wave first-motion data. For dip-slip earthquakes, inversions of long-period Rayleigh waves that use an erroneous source location in the down-dip or along-strike directions of a nodal plane, overestimate the strike, dip, and slip of that nodal plane. Inversions of strike-slip earthquakes that utilize an erroneous location along the strike of a nodal plane overestimate the slip of that nodal plane, causing the second nodal plane to dip incorrectly in the direction opposite to the mislocation vector. The effects of epicentral mislocation for earthquakes with 45° dip-slip fault mechanisms are more severe than for events with other fault mechanisms. Existing earth model propagation corrections do not appear to be sufficiently accurate to routinely determine the optimal surface-wave source location without constraints from body-wave information, unless extensive direct path (R1) data are available or empirical path calibrations are performed. However, independent surface-wave and body-wave solutions can be remarkably consistent when the effects of epicentral mislocation are accounted for. This will allow simultaneous unconstrained body-wave and surface-wave inversions to be performed despite the well known difficulties of extracting the complete moment tensor of shallow sources from fundamental modes.

3D elastic full-waveform inversion of surface waves in the presence of irregular topography using an envelope-based misfit function

Geophysics ◽  
2018 ◽  
Vol 83 (1) ◽  
pp. R1-R11 ◽  
Author(s):  
Dmitry Borisov ◽  
Ryan Modrak ◽  
Fuchun Gao ◽  
Jeroen Tromp
Keyword(s):  
Surface Wave ◽  
Objective Function ◽  
Surface Waves ◽  
Large Scale ◽  
Body Wave ◽  
Waveform Inversion ◽  
Full Waveform Inversion ◽  
S Wave ◽  
Near Surface ◽  
Full Waveform

Full-waveform inversion (FWI) is a powerful method for estimating the earth’s material properties. We demonstrate that surface-wave-driven FWI is well-suited to recovering near-surface structures and effective at providing S-wave speed starting models for use in conventional body-wave FWI. Using a synthetic example based on the SEG Advanced Modeling phase II foothills model, we started with an envelope-based objective function to invert for shallow large-scale heterogeneities. Then we used a waveform-difference objective function to obtain a higher-resolution model. To accurately model surface waves in the presence of complex tomography, we used a spectral-element wave-propagation solver. Envelope misfit functions are found to be effective at minimizing cycle-skipping issues in surface-wave inversions, and surface waves themselves are found to be useful for constraining complex near-surface features.

scholarly journals Application of Seismic Interferometry by Multidimensional Deconvolution to Earthquake Data Recorded in Malargüe, Argentina

2021 ◽  
Vol 13 (23) ◽  
pp. 4818
Author(s):  
Faezeh Shirmohammadi ◽  
Deyan Draganov ◽  
Mohammad Reza Hatami ◽  
Cornelis Weemstra
Keyword(s):  
Surface Wave ◽  
Surface Waves ◽  
Power Spectra ◽  
Site Amplification ◽  
Seismic Array ◽  
Seismic Interferometry ◽  
Seismic Responses ◽  
Central Chile ◽  
Earthquake Data

Seismic interferometry (SI) refers to the principle of generating new seismic responses using crosscorrelations of existing wavefield recordings. In this study, we report on the use of a specific interferometric approach, called seismic interferometry by multidimensional deconvolution (SI by MDD), for the purpose of retrieving surface-wave responses. In theory, SI by MDD suffers less from irregularities in the distribution of (passive) sources than conventional SI. Here, we confirm this advantage for the application to surface waves originating from regional earthquakes close to Central Chile. For that purpose, we use the Malargüe seismic array in Argentina. This T-shaped array consists of two perpendicular lines of stations, which makes it rather suitable for the application of SI by MDD. Comparing the responses retrieved through SI by MDD to the responses retrieved using conventional SI, we find that the application of SI by MDD results in surface-wave responses that are both more accurate and more stable than surface-wave responses that are retrieved using conventional SI. That is, our results demonstrate that SI by MDD suffers less from non-uniformly distributed earthquakes and differences in the power spectra of earthquake responses. In addition, we show that SI by MDD mitigates the effect of site amplification on the retrieved surface waves.

Sign in / Sign up

Export Citation Format

Share Document