Topographic corrections to slowness measurements in parsimonious migration of land data

Geophysics ◽  
2007 ◽  
Vol 72 (2) ◽  
pp. S77-S80 ◽  
Author(s):  
Ibrahim Z. Basi ◽  
George A. McMechan
Keyword(s):  
Seismic Data ◽  
Field Data

Parsimonious migration requires that incident and emergent angles be measured, via apparent slownesses, from the seismic data being migrated. When slownesses are measured from land data, it is the apparent slowness along the topography, not the horizontal slowness that is being measured. Thus, errors are introduced into the incident and emergent angle estimates, which are defined via horizontal slownesses. These errors can be corrected using the local topographic dips. A 2D field data example shows that, after correction, a migrated image has significantly improved coherency.

Laplace-domain full-waveform inversion of seismic data lacking low-frequency information

Geophysics ◽  
2012 ◽  
Vol 77 (5) ◽  
pp. R199-R206 ◽  
Author(s):  
Wansoo Ha ◽  
Changsoo Shin
Keyword(s):  
Seismic Data ◽  
Field Data ◽  
Waveform Inversion ◽  
Low Frequency ◽  
Single Frequency ◽  
Frequency Content ◽  
Laplace Domain ◽  
Frequency Information ◽  
Velocity Models ◽  
Gaussian Source

The lack of the low-frequency information in field data prohibits the time- or frequency-domain waveform inversions from recovering large-scale background velocity models. On the other hand, Laplace-domain waveform inversion is less sensitive to the lack of the low frequencies than conventional inversions. In theory, frequency filtering of the seismic signal in the time domain is equivalent to a constant multiplication of the wavefield in the Laplace domain. Because the constant can be retrieved using the source estimation process, the frequency content of the seismic data does not affect the gradient direction of the Laplace-domain waveform inversion. We obtained inversion results of the frequency-filtered field data acquired in the Gulf of Mexico and two synthetic data sets obtained using a first-derivative Gaussian source wavelet and a single-frequency causal sine function. They demonstrated that Laplace-domain inversion yielded consistent results regardless of the frequency content within the seismic data.

Removal of surface-related multiples from marine seismic data: A field data example

1995 ◽  
Author(s):  
R.G. van Borselen ◽  
J.T. Fokkema ◽  
P.M. van den Berg
Keyword(s):  
Seismic Data ◽  
Field Data ◽  
Marine Seismic

Poststack velocity analysis by separation and imaging of seismic diffractions

Geophysics ◽  
2007 ◽  
Vol 72 (6) ◽  
pp. U89-U94 ◽  
Author(s):  
Sergey Fomel ◽  
Evgeny Landa ◽  
M. Turhan Taner
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
Field Data ◽  
Small Scale ◽  
Velocity Analysis ◽  
High Resolution Imaging ◽  
Diffracted Waves ◽  
Resolution Imaging ◽  
Seismic Reflections ◽  
Optimal Focusing

Small geologic features manifest themselves in seismic data in the form of diffracted waves, which are fundamentally different from seismic reflections. Using two field-data examples and one synthetic example, we demonstrate the possibility of separating seismic diffractions in the data and imaging them with optimally chosen migration velocities. Our criteria for separating reflection and diffraction events are the smoothness and continuity of local event slopes that correspond to reflection events. For optimal focusing, we develop the local varimax measure. The objectives of this work are velocity analysis implemented in the poststack domain and high-resolution imaging of small-scale heterogeneities. Our examples demonstrate the effectiveness of the proposed method for high-resolution imaging of such geologic features as faults, channels, and salt boundaries.

scholarly journals High-resolution coherency functionals for velocity analysis: An application for subbasalt seismic exploration

Geophysics ◽  
2013 ◽  
Vol 78 (5) ◽  
pp. U53-U63 ◽  
Author(s):  
Andrea Tognarelli ◽  
Eusebio Stucchi ◽  
Alessia Ravasio ◽  
Alfredo Mazzotti
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
Field Data ◽  
Signal To Noise Ratio ◽  
Synthetic Seismograms ◽  
Seismic Exploration ◽  
Velocity Analysis ◽  
Signal To Noise ◽  
Geologic Setting ◽  
Analytic Signals

We tested the properties of three different coherency functionals for the velocity analysis of seismic data relative to subbasalt exploration. We evaluated the performance of the standard semblance algorithm and two high-resolution coherency functionals based on the use of analytic signals and of the covariance estimation along hyperbolic traveltime trajectories. Approximate knowledge of the wavelet was exploited to design appropriate filters that matched the primary reflections, thereby further improving the ability of the functionals to highlight the events of interest. The tests were carried out on two synthetic seismograms computed on models reproducing the geologic setting of basaltic intrusions and on common midpoint gathers from a 3D survey. Synthetic and field data had a very low signal-to-noise ratio, strong multiple contamination, and weak primary subbasalt signals. The results revealed that high-resolution coherency functionals were more suitable than semblance algorithms to detect primary signals and to distinguish them from multiples and other interfering events. This early discrimination between primaries and multiples could help to target specific signal enhancement and demultiple operations.

Fault interpretation from high‐resolution seismic data in the northern Negev, Israel

Geophysics ◽  
1991 ◽  
Vol 56 (7) ◽  
pp. 1064-1070 ◽  
Author(s):  
Ilan Bruner ◽  
Eugeny Landa
Keyword(s):  
High Resolution ◽  
Seismic Data ◽  
Field Data ◽  
Dynamic Properties ◽  
Fault Zones ◽  
Diffracted Waves ◽  
Fault Interpretation ◽  
Low Amplitude ◽  
Seismic Lines ◽  
Sense Reverse

Detection and investigation of fault zones are important tools for tectonic analysis and geological studies. A fault zone inferred on high‐resolution seismic lines has been interpreted using a method of detection of diffracted waves utilizing the main kinematic and dynamic properties of the wavefield. The application of the method to field data from the northern Negev in Israel shows that it provides a good estimate of results and, when used in conjunction with the final stacked data, can give the suspected location of the fault, its sense (reverse or normal), and the amount of “low amplitude” displacement (in an order of the wavelength or even less).

Multidirectional eigenvalue-based coherence attribute for discontinuity detection

Geophysics ◽  
2021 ◽  
pp. 1-48
Author(s):  
Binpeng Yan ◽  
Ruirui Fang ◽  
Xingguo Huang ◽  
Weiming Ou
Keyword(s):  
Physical Model ◽  
Seismic Data ◽  
Field Data ◽  
Seismic Interpretation ◽  
Covariance Matrices ◽  
The Other ◽  
Computationally Efficient ◽  
Discontinuity Detection ◽  
Geological Discontinuities ◽  
Parallel Direction

The conventional coherence attribute is typically applied to migrated full-stacked seismic data volumes to detect geological discontinuities. Recently, multispectral, multiazimuth, and multioffset coherence attributes have been proposed and implemented with different seismic data volumes of specific frequencies, azimuths, and offsets to enhance discontinuities. Generally, geological anomalies, such as faults and channels, will be better illuminated by a perpendicular rather than a parallel direction for computation. Therefore, we propose a multidirectional eigenvalue-based coherence attribute by establishing multiple covariance matrices along certain different directions on a single post-stack volume. We adopt two methods to compute multidirectional coherence attribute. One is to compute multiple coherence volumes in different directions and to define the minimum as the final multidirectional coherence. This method is time-consuming, but could provide partial and overall discontinuity simultaneously. The other method obtains one coherence volume by summing covariance matrices in different directions, which is computationally efficient, but only provides overall discontinuity. The performance of 3D physical model and field data volumes demonstrates that multidirectional coherence can highlight subtle geologic structures with a higher resolution than conventional coherence. This suggests that multidirectional coherence attribute may serve as an effective tool for detecting the distribution of geologic discontinuities in seismic interpretation.

Stacking seismic data using local correlation

Geophysics ◽  
2009 ◽  
Vol 74 (3) ◽  
pp. V43-V48 ◽  
Author(s):  
Guochang Liu ◽  
Sergey Fomel ◽  
Long Jin ◽  
Xiaohong Chen
Keyword(s):  
Seismic Data ◽  
Field Data ◽  
Signal To Noise Ratio ◽  
Random Noise ◽  
Image Point ◽  
Local Correlation ◽  
Seismic Profiles ◽  
Signal To Noise ◽  
Prestack Migration

Stacking plays an important role in improving signal-to-noise ratio and imaging quality of seismic data. However, for low-fold-coverage seismic profiles, the result of conventional stacking is not always satisfactory. To address this problem, we have developed a method of stacking in which we use local correlation as a weight for stacking common-midpoint gathers after NMO processing or common-image-point gathers after prestack migration. Application of the method to synthetic and field data showed that stacking using local correlation can be more effective in suppressing random noise and artifacts than other stacking methods.

APPARENT ATTENUATION DUE TO INTRABED MULTIPLES, II

Geophysics ◽  
1978 ◽  
Vol 43 (4) ◽  
pp. 730-737 ◽  
Author(s):  
M. Schoenberger ◽  
F. K. Levin
Keyword(s):  
Seismic Data ◽  
Field Data ◽  
Seismic Waves ◽  
Synthetic Seismograms ◽  
Frequency Dependent ◽  
Total Attenuation ◽  
The World ◽  
Apparent Attenuation

In a paper with the same title published in Geophysics (June 1974), we showed that synthetic seismograms from two wells gave a frequency‐dependent attenuation due to intrabed multiples of about 0.06 dB/wavelength. This loss was 1/3 to 1/2 of the total attenuation found for field data on lines near the wells. Our data sufficed to confirm the conclusion of O’Doherty and Anstey that attenuation caused by intrabed multiples may be appreciable, but the number of wells was insufficient to establish the magnitude of that attenuation in general. To get a better feel for intrabed multiple‐generated attenuation, we have computed losses for 31 additional wells from basins all over the world. Sonic and, where available, density logs were digitized every foot and converted into synthetic seismograms with 50 orders of intrabed multiples. Using the technique of the 1974 paper of extending the logs and placing an isolated reflector 2000 ft below the bottom of the wells, we computed attenuation constants for plane seismic waves that had traveled down and back through the subsurfaces defined by the logs. Computed constants varied from 0.01 dB/wavelength to 0.22 dB/wavelength. Total traveltimes ranged from 0.7 to 2.7 sec; the average was 1.9 sec. Attenuation constants computed from surface seismic data near four of the 31 wells gave values 1.3 to 7 times the corresponding intrabed constants. Thus, attenuation due to intrabed multiples accounts for an appreciable fraction of the observed attenuation but by no means all of it.

Structurally constrained impedance inversion

2016 ◽  
Vol 4 (4) ◽  
pp. T577-T589 ◽  
Author(s):  
Haitham Hamid ◽  
Adam Pidlisecky
Keyword(s):  
Objective Function ◽  
Seismic Data ◽  
Field Data ◽  
A Priori ◽  
Structural Constraints ◽  
Inversion Algorithm ◽  
Data Set ◽  
Impedance Inversion ◽  
Single Trace ◽  
Complex Geology

In complex geology, the presence of highly dipping structures can complicate impedance inversion. We have developed a structurally constrained inversion in which a computationally well-behaved objective function is minimized subject to structural constraints. This approach allows the objective function to incorporate structural orientation in the form of dips into our inversion algorithm. Our method involves a multitrace impedance inversion and a rotation of an orthogonal system of derivative operators. Local dips used to constrain the derivative operators were estimated from migrated seismic data. In addition to imposing structural constraints on the inversion model, this algorithm allows for the inclusion of a priori knowledge from boreholes. We investigated this algorithm on a complex synthetic 2D model as well as a seismic field data set. We compared the result obtained with this approach with the results from single trace-based inversion and laterally constrained inversion. The inversion carried out using dip information produces a model that has higher resolution that is more geologically realistic compared with other methods.

Seismic characterization of submarine gas-hydrate deposits in the Western Black Sea by acoustic full-waveform inversion of ocean-bottom seismic data

Geophysics ◽  
2019 ◽  
Vol 84 (5) ◽  
pp. B311-B324 ◽  
Author(s):  
Laura Gassner ◽  
Tobias Gerach ◽  
Thomas Hertweck ◽  
Thomas Bohlen
Keyword(s):  
Wave Velocity ◽  
Black Sea ◽  
Gas Hydrate ◽  
Seismic Data ◽  
Field Data ◽  
Waveform Inversion ◽  
P Wave ◽  
Full Waveform Inversion ◽  
Ocean Bottom ◽  
Full Waveform

Evidence for gas-hydrate occurrence in the Western Black Sea is found from seismic measurements revealing bottom-simulating reflectors (BSRs) of varying distinctness. From an ocean-bottom seismic data set, low-resolution traveltime-tomography models of P-wave velocity [Formula: see text] are constructed. They serve as input for acoustic full-waveform inversion (FWI), which we apply to derive high-resolution parameter models aiding the interpretation of the seismic data for potential hydrate and gas deposits. Synthetic tests indicate the applicability of the FWI approach to robustly reconstruct [Formula: see text] models with a typical hydrate and gas signature. Models of S-wave velocity [Formula: see text] containing a hydrate signature can only be reconstructed when the parameter distribution of [Formula: see text] is already well-known. When we add noise to the modeled data to simulate field-data conditions, it prevents the reconstruction of [Formula: see text] completely, justifying the application of an acoustic approach. We invert for [Formula: see text] models from field data of two parallel profiles of 14 km length with a distance of 1 km. Results indicate a characteristic velocity trend for hydrate and gas occurrence at BSR depth in the first of the analyzed profiles. We find no indications for gas accumulations below the BSR on the second profile and only weak indications for hydrate. These differences in the [Formula: see text] signature are consistent with the reflectivity behavior of the migrated seismic streamer data of both profiles in which a zone of high-reflectivity amplitudes is coincident with the potential gas zone derived from the FWI result. Calculating saturation estimates for the potential hydrate and gas zones yields values of up to 30% and 1.2%, respectively.

Sign in / Sign up

Export Citation Format

Share Document