Seismic inversion tracks in situ combustion: A case study from Balol oil field, India

Geophysics ◽  
2009 ◽  
Vol 74 (4) ◽  
pp. B103-B112 ◽  
Author(s):  
Nimisha Vedanti ◽  
Mrinal K. Sen

In situ combustion is one of the approaches used for secondary recovery of heavy oil in which time-lapse seismic data might be used to track the production process. We have analyzed three time-lapse seismic surveys carried out at a time interval of one year during pre- and postcombustion phases of in situ combustion at the Balol field in India. Interpretation of these land time-lapse data using standard seismic amplitude differences in terms of reservoir changes during production and injection can be erroneous. The Balol data, in particular, lacked calibration and had poor repeatability. We have addressed these issues by demonstrating the applicability of independent prestack inversion of baseline and monitor surveys to derive elastic attributes that help to produce clearer images of fluid movement. Independent estimates of wavelets from the baseline and two monitor surveys were used in prestack inversion to estimate acoustic impedance, shear impedance, and Poisson’s ratio. The results show unexpected movement of the thermal front away from the injection wells toward the north and northwest of the injection wells, farther from the production wells. These results have been confirmed by well production data from the field north and northwest of Balol.

2021 ◽  
pp. 1-13
Author(s):  
Wang Xiaoyan ◽  
Zhao Jian ◽  
Yin Qingguo ◽  
Cao Bao ◽  
Zhang Yang ◽  
...  

Summary Achieving effective results using conventional thermal recovery technology is challenging in the deep undisturbed reservoir with extra-heavy oil in the LKQ oil field. Therefore, in this study, a novel approach based on in-situ combustion huff-and-puff technology is proposed. Through physical and numerical simulations of the reservoir, the oil recovery mechanism and key injection and production parameters of early-stage ultraheavy oil were investigated, and a series of key engineering supporting technologies were developed that were confirmed to be feasible via a pilot test. The results revealed that the ultraheavy oil in the LKQ oil field could achieve oxidation combustion under a high ignition temperature of greater than 450°C, where in-situ cracking and upgrading could occur, leading to greatly decreased viscosity of ultraheavy oil and significantly improved mobility. Moreover, it could achieve higher extra-heavy-oil production combined with the energy supplement of flue gas injection. The reasonable cycles of in-situ combustion huff and puff were five cycles, with the first cycle of gas injection of 300 000 m3 and the gas injection volume per cycle increasing in turn. It was predicted that the incremental oil production of a single well would be 500 t in one cycle. In addition, the supporting technologies were developed, such as a coiled-tubing electric ignition system, an integrated temperature and pressure monitoring system in coiled tubing, anticorrosion cementing and completion technology with high-temperature and high-pressure thermal recovery, and anticorrosion injection-production integrated lifting technology. The proposed method was applied to a pilot test in the YS3 well in the LKQ oil field. The high-pressure ignition was achieved in the 2200-m-deep well using the coiled-tubing electric igniter. The maximum temperature tolerance of the integrated monitoring system in coiled tubing reached up to 1200°C, which provided the functions of distributed temperature and multipoint pressure measurement in the entire wellbore. The combination of 13Cr-P110 casing and titanium alloy tubing effectively reduced the high-temperature and high-pressure oxygen corrosion of the wellbore. The successful field test of the comprehensive supporting engineering technologies presents a new approach for effective production in deep extra-heavy-oil reservoirs.


2013 ◽  
Author(s):  
Andrew Priestley ◽  
Jorge Alejandro Ruiz ◽  
Paul F Naccache ◽  
Guenther Glatz ◽  
Virgil Crecana

2007 ◽  
Author(s):  
Hossein Mehdi Zadeh ◽  
Ravi Prakash Srivastava ◽  
Nimisha Vedanti ◽  
Martin Landrø

2020 ◽  
Vol 15 (3) ◽  
Author(s):  
E.Sh. Seytkhaziev ◽  
◽  
N.D. Sarsenbekov ◽  

46 oil samples were collected at the wellheads of different wells of a particular oil field and “oil fingerprinting” was performed by gas chromatographic analysis on LTM-MD-GC in order to understand the fluid connectivity of the reservoir within the field. This field located in the eastern edge of the Caspian Basin. According to the results of cluster analyzes, it was found that the studied samples of the north-eastern part of the oil field differ from those of the south-western part. Since the oil field has a massive reservoir height, all wells operate with minimum water-cut values, except for the production well. In this regard, the ionic composition of the water and the titration method were used to analyze the ionic composition of water, separated from the oil of producing well, two neighboring injection wells and block cluster pumping station of this field, to determine the ionic composition and identify differences and similarities of waters at the molecular level. According to the results of the analyzes, we came to the conclusion that all the studied formation water samples have common origin. The relatively high NaCl value in producing well water may be due to the high concentration of chloride in the oil.


2021 ◽  
Vol 73 (03) ◽  
pp. 38-40
Author(s):  
Trent Jacobs

As the oil and gas industry scans the known universe for ways to diversify its portfolio with alternative forms of energy, it might want to look under its own feet, too. For inside every oil reservoir, there may be a hydrogen reservoir just waiting to get out. The concept comes courtesy of Calgary-based Proton Technologies. Founded in 2015, the young firm is the operator of an aging heavy oil field in Saskatchewan. There, on a small patch of flat farm-land, Proton has been producing oil to pay the bills. At the same time, it has been experimenting with injecting oxygen into its reservoir in a bid to produce exclusively hydrogen. Proton says its process is built on a technical foundation that includes years of research and works at the demonstration scale. Soon, the firm hopes to prove it is also profitable. While it produces its own hydrogen, Proton is licensing out the technology to others. In January, fellow Canadian operator Whitecap Resources secured a hydrogen production license of up to 500 metric tons/day from Proton. Whitecap produces about 48,000 B/D, and thanks to carbon sequestration, the operator has claimed a net negative emissions status since 2018. Proton says it has struck similar licensing deals with other Canadian operators but that these companies have not yet made public announcements. Where these projects go from here may end up representing the ultimate test for Proton’s innovative twist on the in-situ combustion process known so well to the heavy-oil sector. “In-situ combustion has been used in more than 500 projects worldwide over the last century. And, they have all produced hydrogen,” said Grant Strem, a cofounder and the CEO of Proton. Strem is a petroleum geologist by back-ground who spent the majority of his career working on heavy-oil projects for Canadian producers and research analysis with the banks that fund the upstream sector. While his new venture remains registered as an oil company, the self-described explorationist has come to look at oil fields very differently than he used to. “In an oil field, you have oil—hydrocarbons, which are made of hydrogen and carbon. The other fluid down there is H2O. So, an oil field is really a giant hydrogen-rich, energy-dense system that’s all conveniently accessible by wells,” Strem explained. But, in those past examples, the hundreds of other in-situ combustion projects, hydrogen production was merely a byproduct, an associated gas of sorts. It was the result of several reactions generated by air injections that producers use an oxidizer to heat up the heavy oil and get it flowing. What Proton wants to do is to super-charge the hydrogen-generating reactions by using the oil as fuel while leaving the carbon where it is. That ambition includes doing so at a price point that is roughly five times below that of Canadian natural gas prices and an even smaller fraction of what other hydrogen-generation methods cost.


2013 ◽  
Vol 772 ◽  
pp. 751-754 ◽  
Author(s):  
Jia Ming Zhang ◽  
Xiao Dong Wu ◽  
Shu Dong Li ◽  
Jia Zhang ◽  
Han Han Zhang ◽  
...  

The tests of domestic In-Situ Combustion began in 1960s, with smaller and slower development. The technology has been further developed in recent years. There are five pilot projects, which increase more than 60,000 tons of crude oil. X block of Xinjiang Oil Field has been ignited since December of 2009. With the development of the In-situ Combustion technology, the use of analysis of produced fluids is very necessary, which provide theoretical basis for the commencement of the next steps. We can draw conclusion through the analysis of produced fluids: the success of ignition; the adequacy of combustion; reactions at high temperature or low temperature; the forward direction and location of fire front. Analysis of produced fluids for Xinjiang Oil Field determine clearly the ignition is successful and the way forward of the fire-drive front.


2021 ◽  
Vol 343 ◽  
pp. 09009
Author(s):  
Gheorghe Branoiu ◽  
Florinel Dinu ◽  
Maria Stoicescu ◽  
Iuliana Ghetiu ◽  
Doru Stoianovici

Thermal oil recovery is a special technique belonging to Enhanced Oil Recovery (EOR) methods and includes steam flooding, cyclic steam stimulation, and in-situ combustion (fire flooding) applied especially in the heavy oil reservoirs. Starting 1970 in-situ combustion (ISC) process has been successfully applied continuously in the Suplacu de Barcau oil field, currently this one representing the most important reservoir operated by ISC in the world. Suplacu de Barcau field is a shallow clastic Pliocene, heavy oil reservoir, located in the North-Western Romania and geologically belonging to Eastern Pannonian Basin. The ISC process are operated using a linear combustion front propagated downstructure. The maximum oil production was recorded in 1985 when the total air injection rate has reached maximum values. Cyclic steam stimulation has been continuously applied as support for the ISC process and it had a significant contribution in the oil production rates. Nowadays the oil recovery factor it’s over 55 percent but significant potential has left. In the paper are presented the important moments in the life-time production of the oil field, such as production history, monitoring of the combustion process, technical challenges and their solving solutions, and scientific achievements revealed by many studies performed on the impact of the ISC process in the oil reservoir.


2012 ◽  
Vol 52 (2) ◽  
pp. 657
Author(s):  
Paul Anderson ◽  
Paul Bingaman ◽  
Sam Betts ◽  
Kyle Graves ◽  
Fred Fernandes ◽  
...  

Located on the North West Shelf of Western Australia, the Stag Oil field has proven to be a prolific reservoir, having produced more than 55 million barrels (MMbbls) of oil since 1998. This has not been without its challenges, however; with premature water breakthrough from injection wells occuring in several wells, potentially stranding large volumes of oil in the ground. Using the multicomponent processing and joint amplitude-versus-offset (AVO) inversion of an ocean bottom cable (OBC) seismic survey acquired in late 2007, new light has been shed on the distribution of unswept oil. This data has led to the succesful drilling of six wells and a marked increase in field production. Additionally, the seismic data has also been used to minimise drilling risks by using seismic coherency to steer the well around potential problems with a significant impact on well costs due to reduction of wellbore problems associated with horizontal drilling in the Muderong shale. To date, four wells have been drilled using this technique, resulting in a significant decrease in non-productive time while drilling during the most recent drilling campaign, which has a significant impact upon the profitability of these late-stage development wells.


Sign in / Sign up

Export Citation Format

Share Document