AVO inversion and poroelasticity with P- and S-wave moduli

Geophysics ◽  
2012 ◽  
Vol 77 (6) ◽  
pp. N17-N24 ◽  
Author(s):  
Zhaoyun Zong ◽  
Xingyao Yin ◽  
Guochen Wu
Keyword(s):  
Seismic Data ◽  
Real Data ◽  
P Wave ◽  
Model Parameters ◽  
Initial Model ◽  
S Wave ◽  
Data Set ◽  
Statistical Probability ◽  
Avo Inversion ◽  
Poroelasticity Theory

The fluid term in the Biot-Gassmann equation plays an important role in reservoir fluid discrimination. The density term imbedded in the fluid term, however, is difficult to estimate because it is less sensitive to seismic amplitude variations. We combined poroelasticity theory, amplitude variation with offset (AVO) inversion, and identification of P- and S-wave moduli to present a stable and physically meaningful method to estimate the fluid term, with no need for density information from prestack seismic data. We used poroelasticity theory to express the fluid term as a function of P- and S-wave moduli. The use of P- and S-wave moduli made the derivation physically meaningful and natural. Then we derived an AVO approximation in terms of these moduli, which can then be directly inverted from seismic data. Furthermore, this practical and robust AVO-inversion technique was developed in a Bayesian framework. The objective was to obtain the maximum a posteriori solution for the P-wave modulus, S-wave modulus, and density. Gaussian and Cauchy distributions were used for the likelihood and a priori probability distributions, respectively. The introduction of a low-frequency constraint and statistical probability information to the objective function rendered the inversion more stable and less sensitive to the initial model. Tests on synthetic data showed that all the parameters can be estimated well when no noise is present and the estimated P- and S-wave moduli were still reasonable with moderate noise and rather smooth initial model parameters. A test on a real data set showed that the estimated fluid term was in good agreement with the results of drilling.

Shear‐wave velocity and density estimation from PS-wave AVO analysis: Application to an OBS dataset from the North Sea

Geophysics ◽  
2000 ◽  
Vol 65 (5) ◽  
pp. 1446-1454 ◽  
Author(s):  
Side Jin ◽  
G. Cambois ◽  
C. Vuillermoz
Keyword(s):  
Wave Velocity ◽  
North Sea ◽  
Random Noise ◽  
P Wave ◽  
S Wave ◽  
Data Set ◽  
Avo Analysis ◽  
The North ◽  
Avo Inversion ◽  
The North Sea

S-wave velocity and density information is crucial for hydrocarbon detection, because they help in the discrimination of pore filling fluids. Unfortunately, these two parameters cannot be accurately resolved from conventional P-wave marine data. Recent developments in ocean‐bottom seismic (OBS) technology make it possible to acquire high quality S-wave data in marine environments. The use of (S)-waves for amplitude variation with offset (AVO) analysis can give better estimates of S-wave velocity and density contrasts. Like P-wave AVO, S-wave AVO is sensitive to various types of noise. We investigate numerically and analytically the sensitivity of AVO inversion to random noise and errors in angles of incidence. Synthetic examples show that random noise and angle errors can strongly bias the parameter estimation. The use of singular value decomposition offers a simple stabilization scheme to solve for the elastic parameters. The AVO inversion is applied to an OBS data set from the North Sea. Special prestack processing techniques are required for the success of S-wave AVO inversion. The derived S-wave velocity and density contrasts help in detecting the fluid contacts and delineating the extent of the reservoir sand.

The impact of common‐offset migration on porosity estimation by AVO inversion

Geophysics ◽  
2001 ◽  
Vol 66 (3) ◽  
pp. 755-762 ◽  
Author(s):  
Arild Buland ◽  
Martin Landrø
Keyword(s):  
P Wave ◽  
High Porosity ◽  
S Wave ◽  
Seismic Line ◽  
Data Set ◽  
The North ◽  
Avo Inversion ◽  
Time Migration ◽  
The Impact ◽  
Porosity Estimation

The impact of prestack time migration on porosity estimation has been tested on a 2-D seismic line from the Valhall/Hod area in the North Sea. Porosity is estimated in the Cretaceous chalk section in a two‐step procedure. First, P-wave and S-wave velocity and density are estimated by amplitude variation with offset (AVO) inversion. These parameters are then linked to porosity through a petrophysical rock data base based on core plug analysis. The porosity is estimated both from unmigrated and prestack migrated seismic data. For the migrated data set, a standard prestack Kirchhoff time migration is used, followed by simple angle and amplitude corrections. Compared to modern high‐cost, true amplitude migration methods, this approach is faster and more practical. The test line is structurally fairly simple, with a maximum dip of 5°; but the results differ significantly, depending on whether migration is applied prior to the inversion. The maximum difference in estimated porosity is of the order of 10% (about 50% relative change). High‐porosity zones estimated from the unmigrated data were not present on the porosity section estimated from the migrated data.

Full-waveform matching of VP and VS models from surface waves

2019 ◽  
Vol 218 (3) ◽  
pp. 1873-1891 ◽  
Author(s):  
Farbod Khosro Anjom ◽  
Daniela Teodor ◽  
Cesare Comina ◽  
Romain Brossier ◽  
Jean Virieux ◽  
...  
Keyword(s):  
Surface Waves ◽  
Wave Velocity ◽  
Real Data ◽  
Test Site ◽  
P Wave ◽  
S Wave ◽  
Surface Wave Dispersion ◽  
Data Set ◽  
Near Surface ◽  
Velocity Models

SUMMARY The analysis of surface wave dispersion curves (DCs) is widely used for near-surface S-wave velocity (VS) reconstruction. However, a comprehensive characterization of the near-surface requires also the estimation of P-wave velocity (VP). We focus on the estimation of both VS and VP models from surface waves using a direct data transform approach. We estimate a relationship between the wavelength of the fundamental mode of surface waves and the investigation depth and we use it to directly transform the DCs into VS and VP models in laterally varying sites. We apply the workflow to a real data set acquired on a known test site. The accuracy of such reconstruction is validated by a waveform comparison between field data and synthetic data obtained by performing elastic numerical simulations on the estimated VP and VS models. The uncertainties on the estimated velocity models are also computed.

Simultaneous inversion of PP and PS seismic data

Geophysics ◽  
2006 ◽  
Vol 71 (3) ◽  
pp. R1-R10 ◽  
Author(s):  
Helene Hafslund Veire ◽  
Martin Landrø
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Model Building ◽  
Joint Inversion ◽  
P Wave ◽  
Inversion Method ◽  
System Of Equations ◽  
S Wave ◽  
Data Set ◽  
Simultaneous Inversion

Elastic parameters derived from seismic data are valuable input for reservoir characterization because they can be related to lithology and fluid content of the reservoir through empirical relationships. The relationship between physical properties of rocks and fluids and P-wave seismic data is nonunique. This leads to large uncertainties in reservoir models derived from P-wave seismic data. Because S- waves do not propagate through fluids, the combined use of P-and S-wave seismic data might increase our ability to derive fluid and lithology effects from seismic data, reducing the uncertainty in reservoir characterization and thereby improving 3D reservoir model-building. We present a joint inversion method for PP and PS seismic data by solving approximated linear expressions of PP and PS reflection coefficients simultaneously using a least-squares estimation algorithm. The resulting system of equations is solved by singular-value decomposition (SVD). By combining the two independent measurements (PP and PS seismic data), we stabilize the system of equations for PP and PS seismic data separately, leading to more robust parameter estimation. The method does not require any knowledge of PP and PS wavelets. We tested the stability of this joint inversion method on a 1D synthetic data set. We also applied the methodology to North Sea multicomponent field data to identify sand layers in a shallow formation. The identified sand layers from our inverted sections are consistent with observations from nearby well logs.

Constrained nonlinear amplitude variation with offset inversion using Zoeppritz equations

Geophysics ◽  
2018 ◽  
Vol 83 (3) ◽  
pp. R245-R255 ◽  
Author(s):  
Ali Gholami ◽  
Hossein S. Aghamiry ◽  
Mostafa Abbasi
Keyword(s):  
Nonlinear Equations ◽  
Wave Velocity ◽  
Seismic Data ◽  
P Wave ◽  
Simultaneous Estimation ◽  
Model Parameters ◽  
Amplitude Variation ◽  
Amplitude Variation With Offset ◽  
Zoeppritz Equations ◽  
Avo Inversion

The inversion of prestack seismic data using amplitude variation with offset (AVO) has received increased attention in the past few decades because of its key role in estimating reservoir properties. AVO is mainly governed by the Zoeppritz equations, but traditional inversion techniques are based on various linear or quasilinear approximations to these nonlinear equations. We have developed an efficient algorithm for nonlinear AVO inversion of precritical reflections using the exact Zoeppritz equations in multichannel and multi-interface form for simultaneous estimation of the P-wave velocity, S-wave velocity, and density. The total variation constraint is used to overcome the ill-posedness while solving the forward nonlinear model and to preserve the sharpness of the interfaces in the parameter space. The optimization is based on a combination of Levenberg’s algorithm and the split Bregman iterative scheme, in which we have to refine the data and model parameters at each iteration. We refine the data via the original nonlinear equations, but we use the traditional cost-effective linearized AVO inversion to construct the Jacobian matrix and update the model. Numerical experiments show that this new iterative procedure is convergent and converges to a solution of the nonlinear problem. We determine the performance and optimality of our nonlinear inversion algorithm with various simulated and field seismic data sets.

Bayesian linearized AVO inversion

Geophysics ◽  
2003 ◽  
Vol 68 (1) ◽  
pp. 185-198 ◽  
Author(s):  
Arild Buland ◽  
Henning Omre
Keyword(s):  
Wave Velocity ◽  
Posterior Distribution ◽  
Acoustic Impedance ◽  
Velocity Ratio ◽  
P Wave ◽  
Inversion Method ◽  
Inversion Algorithm ◽  
S Wave ◽  
Data Set ◽  
Avo Inversion

A new linearized AVO inversion technique is developed in a Bayesian framework. The objective is to obtain posterior distributions for P‐wave velocity, S‐wave velocity, and density. Distributions for other elastic parameters can also be assessed—for example, acoustic impedance, shear impedance, and P‐wave to S‐wave velocity ratio. The inversion algorithm is based on the convolutional model and a linearized weak contrast approximation of the Zoeppritz equation. The solution is represented by a Gaussian posterior distribution with explicit expressions for the posterior expectation and covariance; hence, exact prediction intervals for the inverted parameters can be computed under the specified model. The explicit analytical form of the posterior distribution provides a computationally fast inversion method. Tests on synthetic data show that all inverted parameters were almost perfectly retrieved when the noise approached zero. With realistic noise levels, acoustic impedance was the best determined parameter, while the inversion provided practically no information about the density. The inversion algorithm has also been tested on a real 3‐D data set from the Sleipner field. The results show good agreement with well logs, but the uncertainty is high.

Inversion and interpretation of a 3D seismic data set from the Ouachita Mountains, Oklahoma

Geophysics ◽  
2009 ◽  
Vol 74 (2) ◽  
pp. B37-B45 ◽  
Author(s):  
Abuduwali Aibaidula ◽  
George McMechan
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
3D Visualization ◽  
Wave Impedance ◽  
P Wave ◽  
3D Seismic ◽  
S Wave ◽  
Ouachita Mountains ◽  
Data Set ◽  
3D Seismic Data

Acoustic impedance inversion (AI) and simultaneous angle-dependent inversion (SADI) of a 3D seismic data set characterize reservoirs of Mississippian Morrowan age in the triangle zone of the frontal Ouachita Mountains, Oklahoma. Acoustic impedance of the near-angle seismic data images the 3D spatial distributions of Wapanucka limestone and Cromwell sandstone. Lamé [Formula: see text] ([Formula: see text] and [Formula: see text]) and [Formula: see text] sections are derived from the P-wave and S-wave impedance ([Formula: see text] and [Formula: see text]) sections produced by the SADI. Lithology is identified from the gamma logs and [Formula: see text]. The [Formula: see text], [Formula: see text], and [Formula: see text] are interpreted in terms of a hydrocarbon distribution pattern. The [Formula: see text] is used to identify high [Formula: see text] regions that are consistent with high sand/shale ratio. The estimated impedances and derived Lamé parameter sections are consistent with the interpretation that parts of the Wapanucka limestone and Cromwell sandstone contain potential gas reservoirs in fault-bounded compartments. The Cromwell sandstone contains the main inferred reservoirs; the two largest of these are each [Formula: see text] in pore volume. The inversion results also explain the observed low production in previous wells because those did not sample the best compartments. We propose a single new well location that would penetrate both reservoirs; 3D visualization facilitates this recommendation.

Estimating elastic properties and attenuation factor from different frequency components of observed seismic data

2019 ◽  
Vol 220 (2) ◽  
pp. 794-805
Author(s):  
Huaizhen Chen
Keyword(s):  
Reflection Coefficient ◽  
Elastic Properties ◽  
Seismic Data ◽  
Wave Attenuation ◽  
Attenuation Factor ◽  
P Wave ◽  
S Wave ◽  
Data Set ◽  
Frequency Dependent ◽  
Frequency Components

SUMMARY Based on an attenuation model, we first express frequency-dependent P- and S-wave attenuation factors as a function of P-wave maximum attenuation factor, and then we re-express P- and S-wave velocities in anelastic media and derive frequency-dependent stiffness parameters in terms of P-wave maximum attenuation factor. Using the derived stiffness parameters, we propose frequency-dependent reflection coefficient in terms of P- and S-wave moduli at critical frequency and P-wave maximum attenuation factor for the case of an interface separating two attenuating media. Based on the derived reflection coefficient, we establish an approach to utilize different frequency components of observed seismic data to estimate elastic properties (P- and S-wave moduli and density) and attenuation factor, and following a Bayesian framework, we construct the objective function and an iterative method is employed to solve the inversion problem. Tests on synthetic data confirm that the proposed approach makes a stable and robust estimation of unknown parameters in the case of seismic data containing a moderate noise/error. Applying the proposed approach to a real data set illustrates that a reliable attenuation factor is obtained from observed seismic data, and the ability of distinguishing oil-bearing reservoirs is improved combining the estimated elastic properties and P-wave attenuation factor.

Estimating P- and S-wave inverse quality factors from observed seismic data using an attenuative elastic impedance

Geophysics ◽  
2018 ◽  
Vol 83 (2) ◽  
pp. R173-R187 ◽  
Author(s):  
Huaizhen Chen ◽  
Kristopher A. Innanen ◽  
Tiansheng Chen
Keyword(s):  
Seismic Data ◽  
Wave Attenuation ◽  
Synthetic Data ◽  
Real Data ◽  
Quality Factors ◽  
S Wave ◽  
Reservoir Prediction ◽  
Data Set ◽  
Elastic Impedance ◽  
Gas Bearing

P- and S-wave inverse quality factors quantify seismic wave attenuation, which is related to several key reservoir parameters (porosity, saturation, and viscosity). Estimating the inverse quality factors from observed seismic data provides additional and useful information during gas-bearing reservoir prediction. First, we have developed an approximate reflection coefficient and attenuative elastic impedance (QEI) in terms of the inverse quality factors, and then we established an approach to estimate elastic properties (P- and S-wave impedances, and density) and attenuation (P- and S-wave inverse quality factors) from seismic data at different incidence angles and frequencies. The approach is implemented as a two-step inversion: a model-based and damped least-squares inversion for QEI, and a Bayesian Markov chain Monte Carlo inversion for the inverse quality factors. Synthetic data tests confirm that P- and S-wave impedances and inverse quality factors are reasonably estimated in the case of moderate data error or noise. Applying the established approach to a real data set is suggestive of the robustness of the approach, and furthermore that physically meaningful inverse quality factors can be estimated from seismic data acquired over a gas-bearing reservoir.

scholarly journals Three-component amplitude versus offset analysis

1989 ◽  
Vol 20 (2) ◽  
pp. 257
Author(s):  
D.R. Miles ◽  
G. Gassaway ◽  
L. Bennett ◽  
R. Brown
Keyword(s):  
Seismic Data ◽  
P Wave ◽  
S Wave ◽  
Converted Wave ◽  
P Waves ◽  
S Waves ◽  
Avo Analysis ◽  
Avo Inversion ◽  
Amplitude Versus Offset ◽  
Converted Waves

Three-component (3-C) amplitude versus offset (AVO) inversion is the AVO analysis of the three major energies in the seismic data, P-waves, S-waves and converted waves. For each type of energy the reflection coefficients at the boundary are a function of the contrast across the boundary in velocity, density and Poisson's ratio, and of the angle of incidence of the incoming wave. 3-C AVO analysis exploits these relationships to analyse the AVO changes in the P, S, and converted waves. 3-C AVO analysis is generally done on P, S, and converted wave data collected from a single source on 3-C geophones. Since most seismic sources generate both P and S-waves, it follows that most 3-C seismic data may be used in 3-C AVO inversion. Processing of the P-wave, S-wave and converted wave gathers is nearly the same as for single-component P-wave gathers. In split-spread shooting, the P-wave and S-wave energy on the radial component is one polarity on the forward shot and the opposite polarity on the back shot. Therefore to use both sides of the shot, the back shot must be rotated 180 degrees before it can be stacked with the forward shot. The amplitude of the returning energy is a function of all three components, not just the vertical or radial, so all three components must be stacked for P-waves, then for S-waves, and finally for converted waves. After the gathers are processed, reflectors are picked and the amplitudes are corrected for free-surface effects, spherical divergence and the shot and geophone array geometries. Next the P and S-wave interval velocities are calculated from the P and S-wave moveouts. Then the amplitude response of the P and S-wave reflections are analysed to give Poisson's ratio. The two solutions are then compared and adjusted until they match each other and the data. Three-component AVO inversion not only yields information about the lithologies and pore-fluids at a specific location; it also provides the interpreter with good correlations between the P-waves and the S-waves, and between the P and converted waves, thus greatly expanding the value of 3-C seismic data.

Sign in / Sign up

Export Citation Format

Share Document