Seismic wave attenuation and modulus dispersion in sandstones

Geophysics ◽  
2016 ◽  
Vol 81 (3) ◽  
pp. D211-D231 ◽  
Author(s):  
James W. Spencer ◽  
Jacob Shine
Keyword(s):  
Wave Attenuation ◽  
High Viscosity ◽  
P Wave ◽  
S Wave ◽  
Local Flow ◽  
Shear Moduli ◽  
Low Viscosity ◽  
Confining Pressures ◽  
Wave Induced ◽  
Dispersion And Attenuation

We have conducted laboratory experiments over the 1–200 Hz band to examine the effects of viscosity and permeability on modulus dispersion and attenuation in sandstones and also to examine the effects of partial gas or oil saturation on velocities and attenuations. Our results have indicated that bulk modulus values with low-viscosity fluids are close to the values predicted using Gassmann’s first equation, but, with increasing frequency and viscosity, the bulk and shear moduli progressively deviate from the values predicted by Gassmann’s equations. The shear moduli increase up to 1 GPa (or approximately 10%) with high-viscosity fluids. The P- and S-wave attenuations ([Formula: see text] and [Formula: see text]) and modulus dispersion with different fluids are indicative of stress relaxations that to the first order are scaling with frequency times viscosity. By fitting Cole-Cole distributions to the scaled modulus and attenuation data, we have found that there are similar P-wave, shear and bulk relaxations, and attenuation peaks in each of the five sandstones studied. The modulus defects range from 11% to 15% in Berea sandstone to 16% to 26% in the other sandstones, but these would be reduced at higher confining pressures. The relaxations shift to lower frequencies as the viscosity increased, but they do not show the dependence on permeability predicted by mesoscopic wave-induced fluid flow (WIFF) theories. Results from other experiments having patchy saturation with liquid [Formula: see text] and high-modulus fluids are consistent with mesoscopic WIFF theories. We have concluded that the modulus dispersion and attenuations ([Formula: see text] and [Formula: see text]) in saturated sandstones are caused by a pore-scale, local-flow mechanism operating near grain contacts.

The effects of pore‐fluid salinity on ultrasonic wave propagation in sandstones

Geophysics ◽  
1998 ◽  
Vol 63 (3) ◽  
pp. 928-934 ◽  
Author(s):  
Simon M. Jones ◽  
Clive McCann ◽  
Timothy R. Astin ◽  
Jeremy Sothcott
Keyword(s):  
Wave Propagation ◽  
Ultrasonic Wave ◽  
Wave Attenuation ◽  
Clay Content ◽  
Seismic Wave Propagation ◽  
Ultrasonic Pulse ◽  
Pore Fluid ◽  
P Wave ◽  
S Wave ◽  
Shear Moduli

Petrophysical interpretation of increasingly refined seismic data from subsurface formations requires a more fundamental understanding of seismic wave propagation in sedimentary rocks. We consider the variation of ultrasonic wave velocity and attenuation in sandstones with pore‐fluid salinity and show that wave propagation is modified in proportion to the clay content of the rock and the salinity of the pore fluid. Using an ultrasonic pulse reflection technique (590–890 kHz), we have measured the P-wave and S-wave velocities and attenuations of 15 saturated sandstones with variable effective pressure (5–60 MPa) and pore‐fluid salinity (0.0–3.4 M). In clean sandstones, there was close agreement between experimental and Biot model values of [Formula: see text], but they diverged progressively in rocks containing more than 5% clay. However, this effect is small: [Formula: see text] changed by only 0.6% per molar change in salinity for a rock with a clay content of 29%. The variation of [Formula: see text] with brine molarity exhibited Biot behavior in some samples but not in others; there was no obvious relationship with clay content. P-wave attenuation was independent of pore‐fluid salinity, while S-wave attenuation was weakly dependent. The velocity data suggest the frame bulk and shear moduli of sandstones are altered by changes in the pore‐fluid salinity. One possible mechanism is the formation damage caused by clay swelling and migration of fines in low‐molarity electrolytes. The absence of variation between the attenuation in water‐saturated and brine‐saturated samples indicates the attenuation mechanism is relatively unaffected by changes in the frame moduli.

Pore fluid effects on S-wave attenuation caused by wave-induced fluid flow

Geophysics ◽  
2012 ◽  
Vol 77 (3) ◽  
pp. L13-L23 ◽  
Author(s):  
Beatriz Quintal ◽  
Holger Steeb ◽  
Marcel Frehner ◽  
Stefan M. Schmalholz ◽  
Erik H. Saenger
Keyword(s):  
Fluid Flow ◽  
Wave Attenuation ◽  
Pore Space ◽  
Seismic Attenuation ◽  
P Wave ◽  
S Wave ◽  
Hydrocarbon Reservoir ◽  
Saturated Media ◽  
Water Saturated ◽  
Wave Induced

We studied seismic attenuation of P- and S-waves caused by the physical mechanism of wave-induced fluid flow at the mesoscopic scale. Stress relaxation experiments were numerically simulated by solving Biot’s equations for consolidation of 2D poroelastic media with finite-element modeling. The experiments yielded time-dependent stress-strain relations that were used to calculate the complex moduli from which frequency-dependent attenuation was determined. Our model consisted of periodically distributed circular or elliptical heterogeneities with much lower porosity and permeability than the background media, which contained 80% of the total pore space of the media. This model can represent a hydrocarbon reservoir, where the porous background is fully saturated with oil or gas and the low-porosity regions are always saturated with water. Three different saturation scenarios were considered: oil-saturated (80% oil, 20% water), gas-saturated (80% gas, 20% water), and fully water-saturated media. Varying the dry bulk and shear moduli in the background and in the heterogeneities, a consistent tendency was observed in the relative behavior of the S-wave attenuation among the different saturation scenarios. First, in the gas-saturated media the S-wave attenuation was very low and much lower than in the oil-saturated or in the fully water-saturated media. Second, at low frequencies the S-wave attenuation was significantly higher in the oil-saturated media than in the fully water-saturated media. The P-wave attenuation exhibited a more variable relative behavior among the different saturation degrees. Based on the mechanism of wave-induced fluid flow and on our numerical results, we suggest that S-wave attenuation could be used as an indicator of fluid content in a reservoir. Additionally, we observed that impermeable barriers in the background can cause a significant increase in S-wave attenuation. This suggests that S-wave attenuation could also be an indicator of permeability changes in a reservoir due to, for example, fracturing operations.

P- and S-wave attenuation logs from monopole sonic data

Geophysics ◽  
2000 ◽  
Vol 65 (3) ◽  
pp. 755-765 ◽  
Author(s):  
Xinhua Sun ◽  
Xiaoming Tang ◽  
C. H. (Arthur) Cheng ◽  
L. Neil Frazer
Keyword(s):  
Wave Attenuation ◽  
Fluid Velocity ◽  
P Wave ◽  
Reservoir Rock ◽  
Rock Properties ◽  
S Wave ◽  
Intrinsic Attenuation ◽  
Modified Method ◽  
Receiver Array ◽  
Attenuation Profiles

In this paper, a modification of an existing method for estimating relative P-wave attenuation is proposed. By generating synthetic waveforms without attenuation, the variation of geometrical spreading related to changes in formation properties with depth can be accounted for. With the modified method, reliable P- and S-wave attenuation logs can be extracted from monopole array acoustic waveform log data. Synthetic tests show that the P- and S-wave attenuation values estimated from synthetic waveforms agree well with their respective model values. In‐situ P- and S-wave attenuation profiles provide valuable information about reservoir rock properties. Field data processing results show that this method gives robust estimates of intrinsic attenuation. The attenuation profiles calculated independently from each waveform of an eight‐receiver array are consistent with one another. In fast formations where S-wave velocity exceeds the borehole fluid velocity, both P-wave attenuation ([Formula: see text]) and S-wave attenuation ([Formula: see text]) profiles can be obtained. P- and S-wave attenuation profiles and their comparisons are presented for three reservoirs. Their correlations with formation lithology, permeability, and fractures are also presented.

Local and global fluid-flow effects on dipole flexural waves

Geophysics ◽  
2020 ◽  
Vol 85 (1) ◽  
pp. D1-D11
Author(s):  
Elliot J. H. Dahl ◽  
Kyle T. Spikes
Keyword(s):  
Fluid Flow ◽  
Low Frequency ◽  
Summation Method ◽  
Sensitivity Analyses ◽  
Flexural Wave ◽  
Biot Theory ◽  
S Wave ◽  
Local Flow ◽  
Flow Effects ◽  
Wave Induced

Wave-induced fluid flow (WIFF) can significantly alter the effective formation velocities and cause increasing waveform dispersion and attenuation. We have used modified frame moduli from the theory of Chapman together with the classic Biot theory to improve the understanding of local- and global-flow effects on dipole flexural wave modes in boreholes. We investigate slow and fast formations with and without compliant pores, which induce local flow. The discrete wavenumber summation method generates the waveforms, which are then processed with the weighted spectral semblance method to compare with the solution of the period equation. We find compliant pores to decrease the resulting effective formation P- and S-wave velocities, that in turn decrease the low-frequency velocity limit of the flexural wave. Furthermore, depending on the frequency at which the local-flow dispersion occurs, different S-wave velocity predictions from the flexural wave become possible. This issue is investigated through changing the local-flow critical frequency. Sensitivity analyses of the flexural-wave phase velocity to small changes in WIFF parameters indicate the modeling to be mostly sensitive to compliant pores in slow and fast formations.

scholarly journals A method of geo-acoustic parameter inversion in shallow sea by the Bayesian theory and the acoustic pressure field

2019 ◽  
Vol 283 ◽  
pp. 06003
Author(s):  
Guangxue Zheng ◽  
Hanhao Zhu ◽  
Jun Zhu
Keyword(s):  
Sound Pressure ◽  
Pressure Field ◽  
Wave Attenuation ◽  
Acoustic Parameter ◽  
Bayesian Theory ◽  
P Wave ◽  
Shallow Sea ◽  
S Wave ◽  
Wave Velocities ◽  
Parameter Inversion

A method of geo-acoustic parameter inversion based on the Bayesian theory is proposed for the acquisition of acoustic parameters in shallow sea with the elastic seabed. Firstly, the theoretical prediction value of the sound pressure field is calculated by the fast field method (FFM). According to the Bayesian theory, we establish the misfit function between the measured sound pressure field and the theoretical pressure field. It is under the assumption of Gaussian data errors which are in line with the likelihood function. Finally, the posterior probability density (PPD) of parameters is given as the result of inversion. Our research is conducted in the light of Metropolis sample rules. Apart from numerical simulations, a scaled model experiment has been taken in the laboratory tank. The results of numerical simulations and tank experiments show that sound pressure field calculated by the result of inversion is consistent with the measured sound pressure field. Besides, s-wave velocities, p-wave velocities and seafloor density have fewer uncertainties and are more sensitive to complex sound pressure than s-wave attenuation and p-wave attenuation. The received signals calculated by inversion results are keeping with received signals in the experiment which verify the effectiveness of this method.

Rock-physics modeling of ultrasonic P- and S-wave attenuation in partially frozen brine and unconsolidated sand systems and comparison with laboratory measurements

Geophysics ◽  
2019 ◽  
Vol 84 (5) ◽  
pp. MR153-MR171 ◽  
Author(s):  
Linsen Zhan ◽  
Jun Matsushima
Keyword(s):  
Ultrasonic Wave ◽  
Wave Attenuation ◽  
Freezing Point ◽  
Rock Physics ◽  
Ultrasonic Waves ◽  
P Wave ◽  
Dominant Factor ◽  
S Wave ◽  
High Attenuation ◽  
Unconsolidated Sand

The nonintuitive observation of the simultaneous high velocity and high attenuation of ultrasonic waves near the freezing point of brine was previously measured in partially frozen systems. However, previous studies could not fully elucidate the attenuation variation of ultrasonic wave propagation in a partially frozen system. We have investigated the potential attenuation mechanisms responsible for previously obtained laboratory results by modeling ultrasonic wave transmission in two different partially frozen systems: partially frozen brine (two phases composed of ice and unfrozen brine) and unconsolidated sand (three phases composed of ice, unfrozen brine, and sand). We adopted two different rock-physics models: an effective medium model for partially frozen brine and a three-phase extension of the Biot model for partially frozen unconsolidated sand. For partially frozen brine, our rock-physics study indicated that squirt flow caused by unfrozen brine inclusions in porous ice could be responsible for high P-wave attenuation around the freezing point. Decreasing P-wave attenuation below the freezing point can be explained by the gradual decrease of squirt flow due to the gradual depletion of unfrozen brine. For partially frozen unconsolidated sand, our rock-physics study implied that squirt flow between ice grains is a dominant factor for P-wave attenuation around the freezing point. With decreasing temperature lower than the freezing point, the friction between ice and sand grains becomes more dominant for P-wave attenuation because the decreasing amount of unfrozen brine reduces squirt flow between ice grains, whereas the generation of ice increases the friction. The increasing friction between ice and sand grains caused by ice formation is possibly responsible for increasing the S-wave attenuation at decreasing temperatures. Then, further generation of ice with further cooling reduces the elastic contrast between ice and sand grains, hindering their relative motion; thus, reducing the P- and S-wave attenuation.

Observations of wave velocity and attenuation in two‐phase media

Geophysics ◽  
1986 ◽  
Vol 51 (12) ◽  
pp. 2193-2199 ◽  
Author(s):  
G. W. Purnell
Keyword(s):  
Physical Model ◽  
Wave Velocity ◽  
Wave Attenuation ◽  
P Wave ◽  
Rubber Matrix ◽  
Two Phase ◽  
P Wave Velocity ◽  
Porosity And Permeability ◽  
Dispersion And Attenuation ◽  
Scattering Losses

The velocity and attenuation of a wave transmitted through a two‐phase material are functions of the material’s composition. In physical model experiments, I used suspensions of grains in a silicone rubber matrix to reduce or avoid uncertainties about framework elastic constants, porosity, and permeability that result from using fluid‐saturated grain frameworks. I varied the composition to produce materials that are useful in physical seismic modeling. In the tested suspensions, ultrasonic P-wave velocity, velocity dispersion, and attenuation all increase with grain concentration and frequency. I compared seven published mathematical models for wave propagation in two‐phase media. One given by Mehta most closely agrees with the P-wave velocities I observed. The agreement is sufficiently close to merit use of Mehta’s model in the design of physical model materials. The observed P-wave attenuation generally increases approximately linearly with frequency. This approximate linearity leads to reliable constant-Q estimates, ranging from 187 to 16 for grain concentrations from 0 to 0.49. I conclude that relative motion between the grains and the rubber matrix contributes most of the observed attenuation at lower concentrations, whereas scattering losses become much more important at higher concentrations and frequencies.

Anisotropic P-SV-wave dispersion and attenuation due to inter-layer flow in thinly layered porous rocks

Geophysics ◽  
2011 ◽  
Vol 76 (3) ◽  
pp. WA135-WA145 ◽  
Author(s):  
Fabian Krzikalla ◽  
Tobias M. Müller
Keyword(s):  
Wave Attenuation ◽  
Fluid Pressure ◽  
Pore Fluid ◽  
P Wave ◽  
Angle Of Incidence ◽  
Porous Rocks ◽  
Frequency Dependent ◽  
Symmetry Properties ◽  
Wave Induced ◽  
Attenuation And Dispersion

Elastic upscaling of thinly layered rocks typically is performed using the established Backus averaging technique. Its poroelastic extension applies to thinly layered fluid-saturated porous rocks and enables the use of anisotropic effective medium models that are valid in the low- and high-frequency limits for relaxed and unrelaxed pore-fluid pressures, respectively. At intermediate frequencies, wave-induced interlayer flow causes attenuation and dispersion beyond that described by Biot’s global flow and microscopic squirt flow. Several models quantify frequency-dependent, normal-incidence P-wave propagation in layered poroelastic media but yield no prediction for arbitrary angles of incidence, or for S-wave-induced interlayer flow. It is shown that generalized models for P-SV-wave attenuation and dispersion as a result of interlayer flow can be constructed by unifying the anisotropic Backus limits with existing P-wave frequency-dependent interlayer flow models. The construction principle is exact and is based on the symmetry properties of the effective elastic relaxation tensor governing the pore-fluid pressure diffusion. These new theories quantify anisotropic P- and SV-wave attenuation and velocity dispersion. The maximum SV-wave attenuation is of the same order of magnitude as the maximum P-wave attenuation and occurs prominently around an angle of incidence of [Formula: see text]. For the particular case of a periodically layered medium, the theoretical predictions are confirmed through numerical simulations.

Sign in / Sign up

Export Citation Format

Share Document