Investigation on Dynamical Prediction of Tool Wear Based on Machine Vision and Support Vector Machine

2019 ◽  
pp. 91-104
Author(s):  
Chen Zhang ◽  
Jilin Zhang
Keyword(s):  
Support Vector Machine ◽  
Tool Wear ◽  
Machine Vision ◽  
Support Vector

scholarly journals Oestrus Analysis of Sows Based on Bionic Boars and Machine Vision Technology

Animals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1485
Author(s):  
Kaidong Lei ◽  
Chao Zong ◽  
Xiaodong Du ◽  
Guanghui Teng ◽  
Feiqi Feng
Keyword(s):  
Support Vector Machine ◽  
Machine Vision ◽  
Recognition Accuracy ◽  
Average Duration ◽  
Support Vector ◽  
Contact Duration ◽  
Innovative Design ◽  
Sparse Autoencoder ◽  
Accuracy Rates ◽  
Interactive Behaviour

This study proposes a method and device for the intelligent mobile monitoring of oestrus on a sow farm, applied in the field of sow production. A bionic boar model that imitates the sounds, smells, and touch of real boars was built to detect the oestrus of sows after weaning. Machine vision technology was used to identify the interactive behaviour between empty sows and bionic boars and to establish deep belief network (DBN), sparse autoencoder (SAE), and support vector machine (SVM) models, and the resulting recognition accuracy rates were 96.12%, 98.25%, and 90.00%, respectively. The interaction times and frequencies between the sow and the bionic boar and the static behaviours of both ears during heat were further analysed. The results show that there is a strong correlation between the duration of contact between the oestrus sow and the bionic boar and the static behaviours of both ears. The average contact duration between the sows in oestrus and the bionic boars was 29.7 s/3 min, and the average duration in which the ears of the oestrus sows remained static was 41.3 s/3 min. The interactions between the sow and the bionic boar were used as the basis for judging the sow’s oestrus states. In contrast with the methods of other studies, the proposed innovative design for recyclable bionic boars can be used to check emotions, and machine vision technology can be used to quickly identify oestrus behaviours. This approach can more accurately obtain the oestrus duration of a sow and provide a scientific reference for a sow’s conception time.

scholarly journals An intelligent machine vision system for detecting surface defects on packing boxes based on support vector machine

2019 ◽  
Vol 52 (7-8) ◽  
pp. 1102-1110 ◽  
Author(s):  
Yu Wu ◽  
Yanjie Lu
Keyword(s):  
Support Vector Machine ◽  
Machine Vision ◽  
Defect Detection ◽  
Surface Defects ◽  
Vision System ◽  
Rapid Development ◽  
Training Model ◽  
Support Vector ◽  
Ideal Condition ◽  
Product Packaging

Defects in product packaging are one of the key factors that affect product sales. Traditional defect detection depends primarily on artificial vision detection. With the rapid development of machine vision, image processing, pattern recognition, and other technologies, industrial automation detection has become an inevitable trend because machine vision technology can greatly improve accuracy and efficiency; therefore, it is of great practical value to study automatic detection technology of the surface defects encountered in packaging boxes. In this study, machine vision and machine learning were combined to examine a surface defect detection method based on support vector machine where defective products are eliminated by a sorting robot system. After testing, the support vector machine training model using radial basis function kernel detects three kinds of defects at the same time under the ideal condition of parameter selection, and the effective detection rate is 98.0296%.

Detection and Classification of Watermelon Seeds Exterior Quality Based on LS-SVM Using Machine Vision

2013 ◽  
Vol 278-280 ◽  
pp. 727-730
Author(s):  
Xiai Chen ◽  
Shuang Ke ◽  
Ling Wang
Keyword(s):  
Genetic Algorithm ◽  
Support Vector Machine ◽  
Machine Vision ◽  
Vision System ◽  
Least Square ◽  
Support Vector ◽  
Machine Vision System ◽  
High Quality ◽  
Surface Irregularities

A machine vision system was developed to investigate the detection of watermelon seeds exterior quality. The main characteristics of watermelon seeds appearance including area, perimeter, roughness and minimum enclosing rectangle were calculated by image analysis. Least square support vector machine optimized by genetic algorithm was applied for the classification of watermelon seeds exterior quality, and the broken seeds, normal seeds and high-quality seeds were distinguished finally. The surface irregularities defects of watermelon seeds were detected by machine vision grid laser. The experimental results show that the watermelon seeds exterior quality could be well detected and classified by machine vision based on least squares support vector machine.

Tool condition monitoring system based on support vector machine and differential evolution optimization

2016 ◽  
Vol 231 (5) ◽  
pp. 805-813 ◽  
Author(s):  
Guo F Wang ◽  
Qing L Xie ◽  
Yan C Zhang
Keyword(s):  
Support Vector Machine ◽  
Tool Wear ◽  
Differential Evolution ◽  
Condition Monitoring ◽  
Support Vector Machine Classifier ◽  
Tool Condition Monitoring ◽  
Support Vector ◽  
Grid Search ◽  
Tool Condition ◽  
Condition Monitoring System

A tool condition monitoring system based on support vector machine and differential evolution is proposed in this article. In this system, support vector machine is used to realize the mapping between the extracted features and the tool wear states. At the same time, two important parameters of the support vector machine which are called penalty parameter C and kernel parameter [Formula: see text] are optimized simultaneously based on differential evolution algorithm. In order to verify the effectiveness of the proposed system, a multi-tooth milling experiment of titanium alloy was carried out. Cutting force signals related to different tool wear states were collected, and several time domain and frequency domain features were extracted to depict the dynamic characteristics of the milling process. Based on the extracted features, the differential evolution-support vector machine classifier is constructed to realize the tool wear classification. Moreover, to make a comparison, empirical selection method and four kinds of grid search algorithms are also used to select the support vector machine parameters. At the same time, cross validation is utilized to improve the robustness of the classifier evaluation. The results of analysis and comparisons show that the classification accuracy of differential evolution-support vector machine is higher than empirical selection-support vector machine. Moreover, the time consumption of differential evolution-support vector machine classifier is 5 to 12 times less than that of grid search-support vector machine.

Sign in / Sign up

Export Citation Format

Share Document