Evaluation of spatial distribution of occurrence of parasitozoonoses by GIS tools

Author(s):  
Peter Blišťan ◽  
Soňa Molčíková ◽  
Viera Hurčíkova ◽  
Ľudovít Kovanič ◽  
Ingrid Papajová ◽  
...  
Időjárás ◽  
2021 ◽  
Vol 125 (2) ◽  
pp. 229-253
Author(s):  
Nikola R. Bačević ◽  
Nikola M. Milentijević ◽  
Aleksandar Valjarević ◽  
Ajša Gicić ◽  
Dušan Kićović ◽  
...  

The paper presents trends for three categories of variables: average annual, average maximum and average minimum air temperatures. Data was provided by the meteorological yearbooks of the Republic Hydrometeorological Service of Serbia. The main goal of this paper is to detect possible temperature trends in Central Serbia. The trend equation, trend magnitude, and Mann-Kendall non-parametric test were used in the analysis of climate parameters. The used statistical methods were supplemented by GIS numerical analysis, which aimed to analyze the spatial distribution of isotherms from 1949 to 2018. The obtained results indicate that out of the 72 analyzed time series, an increase in air temperature is dominant in 61 time series, while 11 time series show no changes. The highest increase was recorded in the average maximum time series (4.2 °C), followed by an increase of 3.5°C in average maximum air temperatures. The highest increase in the average annual time-series was 3.0 °C. The lowest increases in air temperature were recorded in the average minimum time series (0.1 and 0.2 °C). In two average minimum time series a decrease in average air temperatures was identified (-0.6 and -0.4 °C. The application of GIS tools indicates the existence of interregional differences in the arrangement of isotherms, leaded by the orography of the terrain. In the spatial distribution of the analyzed variables, "poles of heat" and "poles of cold" stand out, and the influence of the urban heat island is evident (especially in the case of the urban agglomeration of Belgrade). The manifested spatial patterns of air temperature need to be further examined and the correlation with possible causes need to be determined. For these reasons, the paper provides a solid basis for studying the climate of this area in the future, as it provides insight into climate dynamics over the past decades.


2015 ◽  
Vol 7 (1) ◽  
Author(s):  
. Yulius ◽  
Nadya Novianti ◽  
Taslim Arifin ◽  
Hadiwijaya L. Salim ◽  
Muhammad Ramdhan ◽  
...  

Coral reefs contribute significant benefits in coastal area in Wangi-wangi Island, Wakatobi in terms of their ecological functions to marine biota and socio-economical services to local coastal communities. Therefore, it is importance to observe coral reef condition and its spatial distribution around Wangi-wangi island waters, Wakatobi. In this study Point Intercept Transect (PIT) and GIS tools were used to observe and analyze coral reef condition in Wangi-wangi island waters, Wakatobi. The results showed that coral reef condition in Wangi-wangi island waters can be categorized into moderate and good conditions with coverage percentage ranging from 28 – 60%. Based on spatial analysis non-acropora coral was found in greater cover percentages in Waha village, Sombu village, and Kapota island than other locations. Soft coral cover percentage was also found in larger cover percentage in Waha and  Sombu regions than other locations. Keywords: coral reefs, geographic information system (GIS), Wangi-wangi Island


2018 ◽  
Vol 229 ◽  
pp. 02012
Author(s):  
Mangapul Parlindungan Tambunan

Spatial and temporal studies of rain characteristics were carried out in DKI Jakarta. This study aims to: assess the rain characteristic as the cause of flood in DKI Jakarta. Flood is studied from geography using a spatial approach. The data collection of the physical condition of the landform is obtained through interpretation of Topographic Map, Geological Map, and RBI Map. Data on flood areas (area, depth, and length) were obtained from survey and flood incident data obtained from Kimpraswil (PU) of DKI Jakarta, and West Java, rain data obtained from BMKG. The analysis of spreading and spatial distribution is done spatially and temporally using Geographic Information System (GIS) tools, while rain analysis is done descriptively on a scale of 1: 50,000. The results of the research suggest that there are differences and similarities of rainy anomalies in the prone areas of flooding in DKI Jakarta.


2020 ◽  
Vol 28 (1) ◽  
pp. 8-19
Author(s):  
M. Ahmed Al-Rashid

Public parks are considered as the prime community assets that provide places for the citizens to enjoy and spend their leisure time. Parks can serve as the primary source not only incorporating physical activities but also improving quality of life of residents. Equitable access to these services is one of the major concerns worldwide. However, a little attention is paid, in this regard, in the local context. This paper utilizes GIS tools and analyzes the equitable access to urban parks in the Lahore Metropolitan Area, with reference to its spatial distribution. The measures of access for the parks are computed for population depending upon the type of facility at the administrative Zone level. The accessibility to parks is measured using walking distance impedance and proximity analysis tool. The study further evaluates the spatial distribution of parks about population density and examine if differences are observed across different administrative Zones in the Metropolitan. The least served areas and populations have been derived in spatial context across the study area. Moreover, maps prepared using hotspot analysis in GIS help to visually identify the spatial disparities and compare the differences among different administrative Zones in the study area. It allows understanding of how different parks in the metropolitan are distributed through space, and hence help in combating inequitable access. The results of this research can assist the planning authorities in identifying the spatial gaps in accessibility and addressing the needs for improving the accessibility to public parks across different Zones in the Metropolitan.


2015 ◽  
Vol 7 (1) ◽  
Author(s):  
. Yulius ◽  
Nadya Novianti ◽  
Taslim Arifin ◽  
Hadiwijaya L. Salim ◽  
Muhammad Ramdhan ◽  
...  

<p><em>Coral reefs</em><em> contribute significant benefits in coastal area in Wangi-wangi Island, Wakatobi in terms of their ecological function</em><em>s</em><em> </em><em>to</em><em> </em><em>marine</em><em> biota</em><em> and socio-</em><em>econom</em><em>ical services to</em><em> </em><em>local coastal communities</em><em>. </em><em>Therefore, </em><em>it is importance to</em><em> observe </em><em>coral reef condition </em><em>and its </em><em>spatial distribution </em><em>around</em><em> </em><em>Wangi-wangi island</em><em> waters</em><em>, Wakatobi</em><em>. In this study Point Intercept Transect (PIT) and </em><em>GIS tools </em><em>were used to observe and analyze coral reef condition in </em><em>Wangi-wangi island</em><em> waters</em><em>, Wakatobi.</em><em> The results showed that coral reef condition in Wangi-wangi island waters can be categorized into moderate and good conditions with coverage percentage ranging from 28 – 60%.</em> <em>Based on spatial analysis non</em><em>-</em><em>a</em><em>cropora</em><em> coral was found in greater cover percentages in Waha village, Sombu village, and Kapota</em><em> </em><em>island than other</em><em> location</em><em>s. Soft coral cover percentage was also found in larger</em><em> </em><em>cover percentage in Waha and  Sombu regions than other locations.</em></p> <p><strong><em> </em></strong></p> <strong><em>Keywords</em></strong><em>: coral reefs, geographic information system (GIS), Wangi-wangi Island</em>


This study proposes a simulation approach to model the spatial distribution of population (i.e., population density) in a given regioninto a great deal of detail. The approach is based on two mathematical notions: graph theory and fractal geometry. Accordingly, the approach takesself-similarity of road accessibility into account when simulating the spatial distribution of population. The study has followed three steps; (a) formulatea conceptual framework to model the spatial-distribution of population in a given area (i.e. a city or a region) by employingthe network centrality-based fractal dimension, (b) develop a modeling framework, and (c) calibrate the model utilizing empirical data at for five-selected case study areas: Colombo-Sri Lanka, Hanoi-Vietnam, Kolkata -India, Wuhu-China and Singapore. Network centrality-based fractal dimensions were computed by employing open-data and open-source GIS tools. The study applied threetypes of regression techniques: Robust Regression (RR), Ordinary-Least-Squares Regression (OLSR) and Poisson Regression (PR) for derivingthe most appropriate mathematical model. Then, the study validated the model by testing its prediction accuracy. Results revealed that the developed model to simulate spatial distribution of populationin a given area recorded an accepted level of accuracy (R2 >0.75) and predictability (MdAPE< 10%) on a par with the internationalspatial modeling standards. The proposed approach can be adoptedto simulate the spatial-distribution ofpopulation, particularly as a decision-making aid in the domain of urban & regional planning


2019 ◽  
Vol 17 (4) ◽  
pp. 181-192
Author(s):  
Aleksandra Joachimowicz ◽  
Kamil Nieścioruk

The paper deals with the problem of measuring and analysing noise in resi-dential areas with relation to their vicinity and landscape- and architecture composition. Al-most 70 points were selected to measure the noise three times per day and to create, using GIS tools, spatial image of the phenomenon. The resulting maps were analysed, pointing out sources of noise and factors reducing the sound spread. The further research ideas were suggested as well.


Author(s):  
L. D. Jackel

Most production electron beam lithography systems can pattern minimum features a few tenths of a micron across. Linewidth in these systems is usually limited by the quality of the exposing beam and by electron scattering in the resist and substrate. By using a smaller spot along with exposure techniques that minimize scattering and its effects, laboratory e-beam lithography systems can now make features hundredths of a micron wide on standard substrate material. This talk will outline sane of these high- resolution e-beam lithography techniques.We first consider parameters of the exposure process that limit resolution in organic resists. For concreteness suppose that we have a “positive” resist in which exposing electrons break bonds in the resist molecules thus increasing the exposed resist's solubility in a developer. Ihe attainable resolution is obviously limited by the overall width of the exposing beam, but the spatial distribution of the beam intensity, the beam “profile” , also contributes to the resolution. Depending on the local electron dose, more or less resist bonds are broken resulting in slower or faster dissolution in the developer.


Sign in / Sign up

Export Citation Format

Share Document