Tomographic Imaging with X-Rays

2011 ◽  
pp. 274-309
Keyword(s):  
2017 ◽  
Vol 2017 ◽  
pp. 1-31 ◽  
Author(s):  
Monika Machoy ◽  
Julia Seeliger ◽  
Liliana Szyszka-Sommerfeld ◽  
Robert Koprowski ◽  
Tomasz Gedrange ◽  
...  

Optical coherence tomography provides sections of tissues in a noncontact and noninvasive manner. The device measures the time delay and intensity of the light scattered or reflected from biological tissues, which results in tomographic imaging of their internal structure. This is achieved by scanning tissues at a resolution ranging from 1 to 15 μm. OCT enables real-time in situ imaging of tissues without the need for biopsy, histological procedures, or the use of X-rays, so it can be used in many fields of medicine. Its properties are not only particularly used in ophthalmology, in the diagnosis of all layers of the retina, but also increasingly in cardiology, gastroenterology, pulmonology, oncology, and dermatology. The basic properties of OCT, that is, noninvasiveness and low wattage of the used light, have also been appreciated in analytical technology by conservators, who use it to identify the quality and age of paintings, ceramics, or glass. Recently, the OCT technique of visualization is being tested in different fields of dentistry, which is depicted in the article.


1981 ◽  
Vol 54 (5) ◽  
pp. 996-1002 ◽  
Author(s):  
Harold Berger

Abstract It is recognized that present methods for NDE of tires emphasize x-radiography, ultrasonics, and holographic interferometry. Modifications of these approaches in terms of improved signal processing, image magnification (for x rays), electronic focus (for ultrasonics), and tomographic imaging appear to offer promise for improved NDE of tires. In addition, techniques such as acoustic emission, pulsed eddy currents, microwaves, and vibrothermography also show promise. The suggestion that other NDE methods now being investigated for application to composite structures be followed closely appears valid as does the concept of improved procedures to verify the condition of raw materials used in initial fabrication.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Holly E. Smith ◽  
Joseph J. Bevitt ◽  
Jahdi Zaim ◽  
Yan Rizal ◽  
Aswan ◽  
...  

AbstractWe employ high-throughput thermal-neutron tomographic imaging to visualise internal diagnostic features of dense fossiliferous breccia from three Pleistocene cave localities in Sumatra, Indonesia. We demonstrate that these seemingly homogeneous breccias are an excellent source of data to aid in determining taphonomic and depositional histories of complex depositional sites such as tropical caves. X-ray Computed Tomographic (CT) imaging is gaining importance amongst palaeontologists as a non-destructive approach to studying fossil remains. Traditional methods of fossil preparation risk damage to the specimen and may destroy contextual evidence in the surrounding matrix. CT imaging can reveal the internal composition and structure of fossils contained within consolidated sediment/rock matrices prior to any destructive mechanical or chemical preparation. Neutron computed tomography (NCT) provides an alternative contrast to X-rays, and in some circumstances, is capable of discerning denser matrices impenetrable to or yielding no contrast with CT imaging. High-throughput neutron imaging reduces neutron fluence during scanning which means there is less residual neutron-induced radioactivation in geological samples; allowing for earlier subsequent analyses. However, this approach remains unutilised in palaeontology, archaeology or geological surveys. Results suggest that the primary agents in the formation of the breccias and concentration of incorporated vertebrate remains are several rapid depositional phases of water and sediment gravity flow. This study highlights the potential for future analyses of breccia deposits in palaeontological studies in caves around the world.


2000 ◽  
Author(s):  
Deidre L. Batchelar ◽  
W. Dabrowski ◽  
Ian A. Cunningham

Sign in / Sign up

Export Citation Format

Share Document