New Insights: Mathematical model about Bluefin Tuna Ecology and Measuring Method for Swimming Behaviour of Bluefin Tuna

2015 ◽  
pp. 355-355
2012 ◽  
Vol 184-185 ◽  
pp. 789-792
Author(s):  
Bing Li ◽  
Yu Lan Wei ◽  
Meng Dan Jin ◽  
Ying Ying Fan

Put forward a method that use scatter points which got in different places to measure the involution cylindrical gears, give a mathematical model that use the discrete points to sure the total deviation of gear tooth profile. The experience results show that this way is of high precision in measurement points, measurement an error data processing less intervention, etc.


2010 ◽  
Vol 18 (03) ◽  
pp. 687-707
Author(s):  
PETER SOGAARD ◽  
MIKAEL HARLÉN ◽  
YUN CHAU LONG ◽  
FERENC SZEKERES ◽  
BRIAN R. BARNES ◽  
...  

In vitro incubation of tissues; in particular, skeletal muscles from rodents, is a widely-used experimental method in diabetes research. This experimental method has previously been validated, both experimentally and theoretically. However, much of the method's experimental data remains unclear, including the high-rate of lactate production and the lack of an observable increase in glycogen content, within a given time. The predominant hypothesis explaining the high-rate of lactate production is that this phenomenon is dependent on a mechanism in glycolysis that works as a safety valve, producing lactate when glucose uptake is super-physiological. Another hypothesis is that existing anoxia forces more ATP to be produced from glycolysis, leading to an increased lactate concentration. The lack of an observable increase in glycogen content is assumed to be dependent on limitations in sensitivity of the measuring method used. We derived a mathematical model to investigate which of these hypotheses is most likely to be correct. Using our model, data analysis indicates that the in vitro incubated muscle specimens, most likely are sensing the presence of existing anoxia, rather than an overflow in glycolysis. The anoxic milieu causes the high lactate production. The model also predicts an increased glycogenolysis. After mathematical analyses, an estimation of the glycogen concentration could be made with a reduced model. In conclusion, central anoxia is likely to cause spatial differences in glycogen concentrations throughout the entire muscle. Thus, data regarding total glycogen levels in the incubated muscle do not accurately represent the entire organ. The presented model allows for an estimation of total glycogen, despite spatial differences present in the muscle specimen.


2009 ◽  
Vol 626-627 ◽  
pp. 681-686
Author(s):  
Qing Ming Wen ◽  
L.Y. Zhou ◽  
Z.W. Liu

The three-dimensional figure of a toroidal worm is obtained according the simulation based on the mathematical model. The key of this is the authenticity of the worm surface expressed. Comparing a simulating worm with the true worm, the conformational degree between them can be found out. As the worm surfaces are complex space surfaces, so it is difficult to determine the measuring method and reference for the surfaces of a worm. According to the entire analysis's, the symmetry section of the worm is defined as a representing section. The space surface measuring is converted to a plane curve measuring, and the possibly existing error will be analyzed. The experiments for checking two true worms are made to prove the truthfulness and reliability of the simulation program of the plane enveloping toroidal worm.


2015 ◽  
Vol 2015 ◽  
pp. 1-10 ◽  
Author(s):  
A. Fouda ◽  
A. El-Hadidy ◽  
A. El-Deeb

This paper presents a novel mathematical model of bleached cotton plain single jersey knitted fabrics. The mathematical model is used to deduce the fabric geometrical relationships that can be useful for forecasting the properties of the fabric before production. A practical verification is carried out at different cotton yarn counts and twist factors. The obtained mathematical and practical results are deeply studied and analyzed. The results showed a good agreement between the proposed mathematical model and the practical one. The finished fabric weight is predicted at different yarn counts and loop lengths, and a forecasting weight chart is deduced. This chart will undoubtedly help the producers to enhance the fabric productions. In addition, an actual yarn diameter in the fabric measuring method is carried out and the fabric thickness is estimated consequently. The obtained results proved that the plain single jersey thickness is proportional to three times of the actual measured yarn diameter.


Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4886
Author(s):  
Francesca Venturini ◽  
Umberto Michelucci ◽  
Michael Baumgartner

A well-known approach to the optical measure of oxygen is based on the quenching of luminescence by molecular oxygen. The main challenge for this measuring method is the determination of an accurate mathematical model for the sensor response. The reason is the dependence of the sensor signal from multiple parameters (like oxygen concentration and temperature), which are cross interfering in a sensor-specific way. The common solution is to measure the different parameters separately, for example, with different sensors. Then, an approximate model is developed where these effects are parametrized ad hoc. In this work, we describe a new approach for the development of a learning sensor with parallel inference that overcomes all these difficulties. With this approach we show how to generate automatically and autonomously a very large dataset of measurements and how to use it for the training of the proposed neural-network-based signal processing. Furthermore, we demonstrate how the sensor exploits the cross-sensitivity of multiple parameters to extract them from a single set of optical measurements without any a priori mathematical model with unprecedented accuracy. Finally, we propose a completely new metric to characterize the performance of neural-network-based sensors, the Error Limited Accuracy. In general, the methods described here are not limited to oxygen and temperature sensing. They can be similarly applied for the sensing with multiple luminophores, whenever the underlying mathematical model is not known or too complex.


2011 ◽  
Vol 24 (2) ◽  
pp. 99-105 ◽  
Author(s):  
Kazuyoshi Komeyama ◽  
Minoru Kadota ◽  
Shinsuke Torisawa ◽  
Katsuya Suzuki ◽  
Yuichi Tsuda ◽  
...  

2012 ◽  
Vol 472-475 ◽  
pp. 2377-2384
Author(s):  
Yu Bing Zhang ◽  
Wen Zhang ◽  
Dong Sheng Li

Restrictors are one of core parts in aerostatic systems. A special multi-microchannel aerostatic restrictor is designed and developed, and the air film thickness is measured by the capacitive measuring method. The mathematical model of capacitance and air film thickness is carried out, capacitances of specific air film thickness are calculated, air film thickness of the multi-microchannel aerostatic restrictor with the overall diameter is measured, and error sources processed and analyzed. Results illustrate that errors between the theoretical calculations and the experimental data are less than 13%, this proves the correctness of the mathematical model as well as the effectiveness of the capacitive measuring method applying for the air film thickness measurement of the aerostatic systems.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Kentaro Higuchi ◽  
Yukinori Kazeto ◽  
Yuichi Ozaki ◽  
Toshiya Yamaguchi ◽  
Yukinori Shimada ◽  
...  

Abstract In bluefin tuna aquaculture, high mortalities of hatchery-reared juveniles occur in sea cages owing to wall collisions that are caused by high-speed swimming in panic due to changes in illuminance. Here, we report that targeted gene mutagenesis of the ryanodine receptor (RyR1b), which allows the sarcoplasmic reticulum to release Ca2+ in fast skeletal muscle, using highly active Platinum TALENs caused slow swimming behaviour in response to external stimuli in Pacific bluefin tuna (PBT) larvae. This characteristic would be a useful trait to prevent wall collisions in aquaculture production. A pair of Platinum TALENs targeting exons 2 and 43 of the PBT ryr1b gene induced deletions in each TALEN target site of the injected embryos with extremely high efficiency. In addition, ryr1b expression was significantly decreased in the mutated G0 larvae at 7 days after hatching (DAH). A touch-evoked escape behaviour assay revealed that the ryr1b-mutated PBT larvae swam away much less efficiently in response to mechanosensory stimulation at 7 DAH than did the wild-type larvae. Our results demonstrate that genome editing technologies are effective tools for determining the functional characterization of genes in a comparatively short period, and create avenues for facilitating genetic studies and breeding of bluefin tuna species.


2008 ◽  
Author(s):  
Ishii Akira ◽  
Yoshida Narihiko ◽  
Hayashi Takafumi ◽  
Umemura Sanae ◽  
Nakagawa Takeshi
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document