Design of a non circular gear Mechanism with Twice Unequal Amplitude Transmission Ratio

This study proposes a new non–circular gear transmission mechanism with an involute–cycloid composite tooth profile to realize the twice unequal amplitude transmission (In a complete rotation cycle of gear transmission, instantaneous transmission ratio has twice fluctuations obvious with unequal amplitude) of non–circular gears. The twice unequal amplitude transmission ratio curve was designed based on Fourier and polynomial functions, the change law of the Fourier coefficient on the instantaneous transmission ratio(In non-circular gear transmission, the transmission ratio changes with time, and the transmission ratio of non-circular gear should be instantaneous transmission ratio) was analyzed, and the pressure angle and contact ratio of the involute–cycloid composite tooth profile was calculated. The involute–cycloid composite tooth profile non–circular gear was machined by WEDM technology, while its meshing experiment was performed using high-speed camera technology. The results demonstrate that the instantaneous transmission ratio curve value obtained via the high-speed camera experiment was consistent with the simulation value of virtual software. Furthermore, the involute–cycloid composite tooth profile was applied in the seedling pickup mechanism of non–circular gear planetary gear train. The possibility of the application of the involute–cycloid composite tooth profile in the seedling pickup mechanism was verified by comparing the consistency of the theoretical and simulated seedling picking trajectory.

Profiling of a shaped worm cutter for shaping gears with non-involute tooth profile

Of the mechanical transmissions used in mechanical engineering, the most common are gears with an involute profile of the teeth flanks. Gears made up of such wheels have a number of advantages, but they also have a number of significant disadvantages. Therefore jne of the current trends is the study of gears with a complex non-involute profile of the teeth flank which have advantages over involute gears in a number of applications, as well as the development of tools for their processing. There are two ways of gear teeth cutting: the copying method and the rolling-in method. The rolling-in method has advantages. The profile of the tool working by the rolling-in method does not depend on the number of teeth of the gear being cut, therefore, the same tool can be used to cut gears with any number of teeth. The accuracy of a gear made by the rolling-in method is significantly higher than the accuracy of a gear made by the copying method. This is primarily due to the continuity of the rolling-in process. When cutting teeth by the rolling method, the tooth surface is formed as a result of processing with a tool, the cutting edges of which are the tooth profile of the mating rack or the tooth profile of the mating gear, and during processing the tool and the workpiece form a mating gear pair. The most common gear cutting tool is the hob cutter. For the machining of gear wheels with a non-involute tooth profile widely used in industry equipment is used. One of the options for a rolling gear cutting tool for shaping gear wheels with a non-involute tooth profile can be a shaped worm cutter. The article describes the method of profiling of the cutting part of shaped hob cutter for machining of gear wheels with normal accuracy. To solve the problem the unified mathematical base – the apparatus of multiparameter mappings of space – the unified structure of mappings for gears and a compact set of unified operators, parameters and functional connections is used.

Analytical calculation models for mesh stiffness and backlash of spur gears under temperature effects

The temperature has a great contribution to the mesh stiffness and backlash of the gear pair. Presence of thermal deformation caused by temperature will complicate the gear teeth interaction. In this paper, the thermal time-varying stiffness model and thermal time-varying backlash model are proposed with the consideration of tooth profile error and total thermo-elastic deformation consists of the teeth deformation, teeth contact deformation, and gear body-induced deformation. The key parameters of thermo-elastic coupling deformation affected by temperature are calculated. Based on the proposed models, the influencing mechanism of temperature on the tooth profile error, mesh stiffness, total deformation, and backlash are revealed. The effects of shaft radius and torque load on the thermal stiffness and thermal backlash are studied. The proposed thermal stiffness and backlash calculation model are proven to be more comprehensive and the correctness is validated.

Influence of Different Modified Gears on the Vibration and Noise of Electric Vehicle Reducer

The tooth profile crowning modification was applied onto paired gears for reducing the noise of an electric vehicle reducer. The simulated gear contact spots are compared before and after modification, and are validated by a contact spot experiment. Based on the rigid-flexible coupling model of the gear transmission system, the time-varying meshing stiffness, time-varying meshing force, and the vibration and noise of the gear pairs with different modified gears obtained by simulating calculation are analyzed. The results showed that the selection of modified gear has a great influence on the modification effect. In the way of tooth profile crowning, it is not advisable to modify the pinion independently, as it may increase the frequency and degree of meshing impact between the helical gear pair, making the transmission become less smooth; while modifying the wheel and pinion at the same time can effectively reduce the time-varying meshing stiffness and force, and the vibration and noise. Also, the optimized gear modification scheme is verified by the noise test.