Large-Scale Water Electrolysis for Power-to-Gas

2016 ◽  
pp. 315-326
Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6594
Author(s):  
Michael Sterner ◽  
Michael Specht

Germany’s energy transition, known as ‘Energiewende’, was always very progressive. However, it came technically to a halt at the question of large-scale, seasonal energy storage for wind and solar, which was not available. At the end of the 2000s, we combined our knowledge of both electrical and process engineering, imitated nature by copying photosynthesis and developed Power-to-Gas by combining water electrolysis with CO2-methanation to convert water and CO2 together with wind and solar power to synthetic natural gas. Storing green energy by coupling the electricity with the gas sector using its vast TWh-scale storage facility was the solution for the biggest energy problem of our time. This was the first concept that created the term ‘sector coupling’ or ‘sectoral integration’. We first implemented demo sites, presented our work in research, industry and ministries, and applied it in many macroeconomic studies. It was an initial idea that inspired others to rethink electricity as well as eFuels as an energy source and energy carrier. We developed the concept further to include Power-to-Liquid, Power-to-Chemicals and other ways to ‘convert’ electricity into molecules and climate-neutral feedstocks, and named it ‘Power-to-X’at the beginning of the 2010s.


2018 ◽  
Vol 43 (33) ◽  
pp. 15625-15638 ◽  
Author(s):  
S. Weidner ◽  
M. Faltenbacher ◽  
I. François ◽  
D. Thomas ◽  
J.B. Skùlason ◽  
...  

RSC Advances ◽  
2014 ◽  
Vol 4 (99) ◽  
pp. 56139-56146 ◽  
Author(s):  
Felix N. Büchi ◽  
Marcel Hofer ◽  
Christian Peter ◽  
Urs D. Cabalzar ◽  
Jérôme Bernard ◽  
...  

In the power-to-gas process, hydrogen, produced by water electrolysis, is used for storage of excess renewable electric power. Pure oxygen is a byproduct of the electrolysis process. Using pure oxygen as the oxidant in polymer electrolyte fuel cells can increase the efficiency of the power-to-hydrogen-to-power energy storage chain.


2019 ◽  
Vol 49 (5) ◽  
pp. 517-528 ◽  
Author(s):  
Ji-Hyung Han ◽  
Kyo-sik Hwang ◽  
Haejun Jeong ◽  
Sung-Yong Byeon ◽  
Joo-Youn Nam ◽  
...  

Materials ◽  
2019 ◽  
Vol 12 (8) ◽  
pp. 1336 ◽  
Author(s):  
Alejandro N. Colli ◽  
Hubert H. Girault ◽  
Alberto Battistel

Water electrolysis is a promising approach to hydrogen production from renewable energy sources. Alkaline water electrolyzers allow using non-noble and low-cost materials. An analysis of common assumptions and experimental conditions (low concentrations, low temperature, low current densities, and short-term experiments) found in the literature is reported. The steps to estimate the reaction overpotentials for hydrogen and oxygen reactions are reported and discussed. The results of some of the most investigated electrocatalysts, namely from the iron group elements (iron, nickel, and cobalt) and chromium are reported. Past findings and recent progress in the development of efficient anode and cathode materials appropriate for large-scale water electrolysis are presented. The experimental work is done involving the direct-current electrolysis of highly concentrated potassium hydroxide solutions at temperatures between 30 and 100 °C, which are closer to industrial applications than what is usually found in literature. Stable cell components and a good performance was achieved using Raney nickel as a cathode and stainless steel 316L as an anode by means of a monopolar cell at 75 °C, which ran for one month at 300 mA cm−2. Finally, the proposed catalysts showed a total kinetic overpotential of about 550 mV at 75 °C and 1 A cm−2.


2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Qiangmin Yu ◽  
Zhiyuan Zhang ◽  
Siyao Qiu ◽  
Yuting Luo ◽  
Zhibo Liu ◽  
...  

AbstractThe use of highly-active and robust catalysts is crucial for producing green hydrogen by water electrolysis as we strive to achieve global carbon neutrality. Noble metals like platinum are currently used catalysts in industry for the hydrogen evolution, but suffer from scarcity, high price and unsatisfied performance and stability at large current density, restrict their large-scale implementations. Here we report the synthesis of a type of monolith catalyst consisting of a metal disulfide (e.g., tantalum sulfides) vertically bonded to a conductive substrate of the same metal tantalum by strong covalent bonds. These features give the monolith catalyst a mechanically-robust and electrically near-zero-resistance interface, leading to an excellent hydrogen evolution performance including rapid charge transfer and excellent durability, together with a low overpotential of 398 mV to achieve a current density of 2,000 mA cm−2 as required by industry. The monolith catalyst has a negligible performance decay after 200 h operation at large current densities. In light of its robust and metallic interface and the various choices of metals giving the same structure, such monolith materials would have broad uses besides catalysis.


2021 ◽  
Author(s):  
Christian Fink ◽  
Sebastian Beblawy ◽  
Andreas M. Enkerlin ◽  
Lucas Mühling ◽  
Largus T. Angenent ◽  
...  

AbstractThermophilic Methanothermobacter spp. are used as model microbes to study the physiology and biochemistry of the conversion of hydrogen and carbon dioxide into methane (i.e., hydrogenotrophic methanogenesis), because of their short doubling times and robust growth with high growth yields. Yet, a genetic system for these model microbes was missing despite intense work for four decades. Here, we report the establishment of tools for genetic modification of M. thermautotrophicus. We developed the modular Methanothermobacter vector system, which provided shuttle-vector plasmids (pMVS) with exchangeable selectable markers and replicons for both Escherichia coli and M. thermautotrophicus. For M. thermautotrophicus, a thermostable neomycin-resistance cassette served as the selectable marker for positive selection with neomycin, and the cryptic plasmid pME2001 from Methanothermobacter marburgensis served as the replicon. The pMVS-plasmid DNA was transferred from E. coli into M. thermautotrophicus via interdomain conjugation. After the successful validation of DNA transfer and positive selection in M. thermautotrophicus, we demonstrated heterologous gene expression of a thermostable β-galactosidase-encoding gene (bgaB) from Geobacillus stearothermophilus under the expression control of four distinct synthetic and native promoters. In quantitative in-vitro enzyme activity assays, we found significantly different β-galactosidase activity with these distinct promoters. With a formate dehydrogenase operon-encoding shuttle vector, we allowed growth of M. thermautotrophicus on formate as the sole growth substrate, while this was not possible for the empty vector control. These genetic tools provide the basis to investigate hypotheses from four decades of research on the physiology and biochemistry of Methanothermobacter spp. on a genetic level.Significance StatementThe world economies are facing permanently increasing energy demands. At the same time, carbon emissions from fossil sources need to be circumvented to minimize harmful effects from climate change. The power-to-gas platform is utilized to store renewable electric power and decarbonize the natural gas grid. The microbe Methanothermobacter thermautotrophicus is already applied as the industrial biocatalyst for the biological methanation step in large-scale power-to-gas processes. To improve the biocatalyst in a targeted fashion, genetic engineering is required. With our shuttle-vector system for heterologous gene expression in M. thermautotrophicus, we set the cornerstone to engineer the microbe for optimized methane production, but also for production of high-value platform chemicals in power-to-x processes.


Sign in / Sign up

Export Citation Format

Share Document