scholarly journals Mutations which block the binding of calmodulin to Spc110p cause multiple mitotic defects

1996 ◽  
Vol 109 (6) ◽  
pp. 1297-1310 ◽  
Author(s):  
D.A. Stirling ◽  
T.F. Rayner ◽  
A.R. Prescott ◽  
M.J. Stark
Keyword(s):  
Nuclear Dna ◽  
Spindle Pole Body ◽  
Point Mutations ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Primary Defect ◽  
Mutant Proteins ◽  
Synchronous Cultures

We have generated three temperature-sensitive alleles of SPC110, which encodes the 110 kDa component of the yeast spindle pole body (SPB). Each of these alleles carries point mutations within the calmodulin (CaM) binding site of Spc110p which affect CaM binding in vitro; two of the mutant proteins fail to bind CaM detectably (spc110-111, spc110-118) while binding to the third (spc110-124) is temperature-sensitive. All three alleles are suppressed to a greater or lesser extent by elevated dosage of the CaM gene (CMD1), suggesting that disruption of CaM binding is the primary defect in each instance. To determine the consequences on Spc110p function of loss of effective CaM binding, we have therefore examined in detail the progression of synchronous cultures through the cell division cycle at the restrictive temperature. In each case, cells replicate their DNA but then lose viability. In spc110-124, most cells duplicate and partially separate the SPBs but fail to generate a functional mitotic spindle, a phenotype which we term ‘abnormal metaphase’. Conversely, spc110-111 cells initially produce nuclear microtubules which appear well-organised but on entry into mitosis accumulate cells with ‘broken spindles’, where one SPB has become completely detached from the nuclear DNA. In both cases, the bulk of the cells suffer a lethal failure to segregate the DNA.

DIPLOID SPORE FORMATION AND OTHER MEIOTIC EFFECTS OF TWO CELL-DIVISION-CYCLE MUTATIONS OF SACCHAROMYCES CEREVISIAE

Genetics ◽  
1980 ◽  
Vol 96 (4) ◽  
pp. 859-876 ◽  
Author(s):  
David Schild ◽  
Breck Byers
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Division ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Cell Division Cycle ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Single Spore ◽  
Diploid Cells ◽  
Meiosis I

ABSTRACT The meiotic effects of two cell-division-cycle mutations of Saccharomyces cerevisiae (cdc5 and cdc14) have been examined. These mutations were isolated by L. H. Hartwell and his colleagues and characterized as defective in mitosis, causing a temperature-sensitive arrest in late nuclear division. When subjected to the restrictive temperature in meiosis, diploid cells homozygous for either of these mutations generally proceeded through premeiotic DNA synthesis and commitment to meiotic levels of recombination, but then arrested at a stage following spindle pole body (SPB) duplication and separation. The two SPBs lacked the interconnection by spindle microtubules typical of the complete meiosis I spindle. Challenge of these homozygotes by a semi-restrictive temperature often caused the production of asci containing two diploid spores. Genetic analysis of the viable pairs of spores revealed that each spore had become homozygous for centromere-linked markers significantly more frequently than for distal markers, indicating that the two spores each contained pairs of sister centromeres that had co-segregated in the reductional division of meiosis I. Ultrastructural analysis of the cdc5 homozygote demonstrated that these cells had completed meiosis I and formed two meiosis II spindles, but that the latter remained unusually short. This resulted in the encapsulation of both poles of each spindle within a single spore wall. These mutations therefore are defective in both meiotic divisions, as well as in the mitotic division described originally.

scholarly journals Role of calmodulin and Spc110p interaction in the proper assembly of spindle pole body compenents.

1996 ◽  
Vol 133 (1) ◽  
pp. 111-124 ◽  
Author(s):  
H A Sundberg ◽  
L Goetsch ◽  
B Byers ◽  
T N Davis
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Immunofluorescent Staining ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Nonpermissive Temperature ◽  
Carboxy Terminus ◽  
Calmodulin Binding ◽  
Pole Body ◽  
Mutant Cells

Previously we demonstrated that calmodulin binds to the carboxy terminus of Spc110p, an essential component of the Saccharomyces cerevisiae spindle pole body (SPB), and that this interaction is required for chromosome segregation. Immunoelectron microscopy presented here shows that calmodulin and thus the carboxy terminus of Spc110p localize to the central plaque. We created temperature-sensitive SPC110 mutations by combining PCR mutagenesis with a plasmid shuffle strategy. The temperature-sensitive allele spc110-220 differs from wild type at two sites. The cysteine 911 to arginine mutation resides in the calmodulin-binding site and alone confers a temperature-sensitive phenotype. Calmodulin overproduction suppresses the temperature sensitivity of spc110-220. Furthermore, calmodulin levels at the SPB decrease in the mutant cells at the restrictive temperature. Thus, calmodulin binding to Spc110-220p is defective at the nonpermissive temperature. Synchronized mutant cells incubated at the nonpermissive temperature arrest as large budded cells with a G2 content of DNA and suffer considerable lethality. Immunofluorescent staining demonstrates failure of nuclear DNA segregation and breakage of many spindles. Electron microscopy reveals an aberrant nuclear structure, the intranuclear microtubule organizer (IMO), that differs from a SPB but serves as a center of microtubule organization. The IMO appears during nascent SPB formation and disappears after SPB separation. The IMO contains both the 90-kD and the mutant 110-kD SPB components. Our results suggest that disruption of the calmodulin Spc110p interaction leads to the aberrant assembly of SPB components into the IMO, which in turn perturbs spindle formation.

scholarly journals MIF2 is required for mitotic spindle integrity during anaphase spindle elongation in Saccharomyces cerevisiae.

1993 ◽  
Vol 123 (2) ◽  
pp. 387-403 ◽  
Author(s):  
M T Brown ◽  
L Goetsch ◽  
L H Hartwell
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Structural Integrity ◽  
Spindle Pole ◽  
Chromosome Loss ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
In Vitro Mutagenesis ◽  
Spindle Elongation

The function of the essential MIF2 gene in the Saccharomyces cerevisiae cell cycle was examined by overepressing or creating a deficit of MIF2 gene product. When MIF2 was overexpressed, chromosomes missegregated during mitosis and cells accumulated in the G2 and M phases of the cell cycle. Temperature sensitive mutants isolated by in vitro mutagenesis delayed cell cycle progression when grown at the restrictive temperature, accumulated as large budded cells that had completed DNA replication but not chromosome segregation, and lost viability as they passed through mitosis. Mutant cells also showed increased levels of mitotic chromosome loss, supersensitivity to the microtubule destabilizing drug MBC, and morphologically aberrant spindles. mif2 mutant spindles arrested development immediately before anaphase spindle elongation, and then frequently broke apart into two disconnected short half spindles with misoriented spindle pole bodies. These findings indicate that MIF2 is required for structural integrity of the spindle during anaphase spindle elongation. The deduced Mif2 protein sequence shared no extensive homologies with previously identified proteins but did contain a short region of homology to a motif involved in binding AT rich DNA by the Drosophila D1 and mammalian HMGI chromosomal proteins.

scholarly journals Mps3p is a novel component of the yeast spindle pole body that interacts with the yeast centrin homologue Cdc31p

2002 ◽  
Vol 159 (6) ◽  
pp. 945-956 ◽  
Author(s):  
Sue L. Jaspersen ◽  
Thomas H. Giddings ◽  
Mark Winey
Keyword(s):  
Mitotic Spindle ◽  
Spindle Pole Body ◽  
Integral Membrane Protein ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Nonpermissive Temperature ◽  
Reading Frame ◽  
Pole Body ◽  
Monopolar Spindle

Accurate duplication of the Saccharomyces cerevisiae spindle pole body (SPB) is required for formation of a bipolar mitotic spindle. We identified mutants in SPB assembly by screening a temperature-sensitive collection of yeast for defects in SPB incorporation of a fluorescently marked integral SPB component, Spc42p. One SPB assembly mutant contained a mutation in a previously uncharacterized open reading frame that we call MPS3 (for monopolar spindle). mps3-1 mutants arrest in mitosis with monopolar spindles at the nonpermissive temperature, suggesting a defect in SPB duplication. Execution point experiments revealed that MPS3 function is required for the first step of SPB duplication in G1. Like cells containing mutations in two other genes required for this step of SPB duplication (CDC31 and KAR1), mps3-1 mutants arrest with a single unduplicated SPB that lacks an associated half-bridge. MPS3 encodes an essential integral membrane protein that localizes to the SPB half-bridge. Genetic interactions between MPS3 and CDC31 and binding of Cdc31p to Mps3p in vitro, as well as the fact that Cdc31p localization to the SPB is partially dependent on Mps3p function, suggest that one function for Mps3p during SPB duplication is to recruit Cdc31p, the yeast centrin homologue, to the half-bridge.

scholarly journals Outer plaque assembly and spore encapsulation are defective during sporulation of adenylate cyclase-deficient mutants of Saccharomyces cerevisiae.

1985 ◽  
Vol 100 (6) ◽  
pp. 1854-1862 ◽  
Author(s):  
I Uno ◽  
K Matsumoto ◽  
A Hirata ◽  
T Ishikawa
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Adenylate Cyclase ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Sensitive Period ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Pole Body ◽  
Spindle Pole Bodies ◽  
Diploid Cells

Sporulation in diploid cells homozygous for the cyr1-2 mutation of the yeast Saccharomyces cerevisiae was examined. This mutation causes a defect in adenylate cyclase and temperature-sensitive arrest in the G1 phase of the mitotic cell cycle. The cyr1-2/cyr1-2 diploid cells were able to initiate meiotic divisions, but produced predominantly two-spored asci at the restrictive temperature. Temperature-sensitive period for production of two-spored asci was approximately 12 h after the transfer of cells to the sporulation medium. The levels of cAMP increased during this period in the wild type and cyr1-2/cyr1-2 diploid cells incubated at the permissive temperature, but remained at an extremely low level in the cyr1-2/cyr1-2 diploid cells incubated at the restrictive temperature. Dyad analysis of the cyr1-2 strain indicated that meiotic products were randomly included into ascospores. Fluorescent microscopy of the cyr1-2/cyr1-2 diploid cells incubated at the restrictive temperature revealed that individual haploid nuclei were enclosed in each of the two spores after meiosis. About half of the cyr1-2/cyr1-2 diploid cells entered normal meiosis 1 producing two normal spindle pole bodies with inner and outer plaques, and the other half entered abnormal meiosis 1 producing one normal spindle pole body and one defective spindle pole body without out plaque. At meiosis II, some cells contained a pair of normal spindle pole bodies and other cells contained pairs of normal and abnormal spindle pole bodies.

scholarly journals The Yeast Spindle Pole Body Component Spc72p Interacts with Stu2p and Is Required for Proper Microtubule Assembly

1998 ◽  
Vol 141 (5) ◽  
pp. 1169-1179 ◽  
Author(s):  
Xiaoyue Peter Chen ◽  
Hongwei Yin ◽  
Tim C. Huffaker
Keyword(s):  
Chromosome Segregation ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Microtubule Assembly ◽  
Temperature Sensitive ◽  
Pole Body ◽  
Cytoplasmic Microtubules ◽  
Spindle Elongation

We have previously shown that Stu2p is a microtubule-binding protein and a component of the Saccharomyces cerevisiae spindle pole body (SPB). Here we report the identification of Spc72p, a protein that interacts with Stu2p. Stu2p and Spc72p associate in the two-hybrid system and can be coimmunoprecipitated from yeast extracts. Stu2p and Spc72p also interact with themselves, suggesting the possibility of a multimeric Stu2p-Spc72p complex. Spc72p is an essential component of the SPB and is able to associate with a preexisting SPB, indicating that there is a dynamic exchange between soluble and SPB forms of Spc72p. Unlike Stu2p, Spc72p does not bind microtubules in vitro, and was not observed to localize along microtubules in vivo. A temperature-sensitive spc72 mutation causes defects in SPB morphology. In addition, most spc72 mutant cells lack cytoplasmic microtubules; the few cytoplasmic microtubules that are observed are excessively long, and some of these are unattached to the SPB. spc72 cells are able to duplicate and separate their SPBs to form a bipolar spindle, but spindle elongation and chromosome segregation rarely occur. The chromosome segregation block does not arrest the cell cycle; instead, spc72 cells undergo cytokinesis, producing aploid cells and polyploid cells that contain multiple SPBs.

scholarly journals Requirement for the Budding Yeast Polo Kinase Cdc5 in Proper Microtubule Growth and Dynamics

2008 ◽  
Vol 7 (3) ◽  
pp. 444-453 ◽  
Author(s):  
Chong J. Park ◽  
Jung-Eun Park ◽  
Tatiana S. Karpova ◽  
Nak-Kyun Soung ◽  
Li-Rong Yu ◽  
...  
Keyword(s):  
Budding Yeast ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Growth Defect ◽  
Temperature Sensitive ◽  
Independent Manner ◽  
Polo Kinase ◽  
Early Anaphase

ABSTRACT In many organisms, polo kinases appear to play multiple roles during M-phase progression. To provide new insights into the function of the budding yeast polo kinase Cdc5, we generated novel temperature-sensitive cdc5 mutants by mutagenizing the C-terminal noncatalytic polo box domain, a region that is critical for proper subcellular localization. One of these mutants, cdc5-11, exhibited a temperature-sensitive growth defect with an abnormal spindle morphology. Strikingly, provision of a moderate level of benomyl, a microtubule-depolymerizing drug, permitted cdc5-11 cells to grow significantly better than the isogenic CDC5 wild type in a FEAR (cdc Fourteen Early Anaphase Release)-independent manner. In addition, cdc5-11 required MAD2 for both cell growth and the benomyl-remedial phenotype. These results suggest that cdc5-11 is defective in proper spindle function. Consistent with this view, cdc5-11 exhibited abnormal spindle morphology, shorter spindle length, and delayed microtubule regrowth at the nonpermissive temperature. Overexpression of CDC5 moderately rescued the spc98-2 growth defect. Interestingly, both Cdc28 and Cdc5 were required for the proper modification of the spindle pole body components Nud1, Slk19, and Stu2 in vivo. They also phosphorylated these three proteins in vitro. Taken together, these observations suggest that concerted action of Cdc28 and Cdc5 on Nud1, Slk19, and Stu2 is important for proper spindle functions.

scholarly journals A Role for NIMA in the Nuclear Localization of Cyclin B in Aspergillus nidulans

1998 ◽  
Vol 141 (7) ◽  
pp. 1575-1587 ◽  
Author(s):  
L. Wu ◽  
S.A. Osmani ◽  
P.M. Mirabito
Keyword(s):  
Aspergillus Nidulans ◽  
Nuclear Localization ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Nuclear Accumulation ◽  
Temperature Sensitive ◽  
Dependent Manner ◽  
Cyclin Dependent Kinase ◽  
Synchronous Cultures ◽  
Allele Specific

NIMA promotes entry into mitosis in late G2 by some mechanism that is after activation of the Aspergillus nidulans G2 cyclin-dependent kinase, NIMXCDC2/NIMECyclin B. Here we present two independent lines of evidence which indicate that this mechanism involves control of NIMXCDC2/NIMECyclin B localization. First, we found that NIMECyclin B localized to the nucleus and the nucleus-associated organelle, the spindle pole body, in a NIMA-dependent manner. Analysis of cells from asynchronous cultures, synchronous cultures, and cultures arrested in S or G2 showed that NIMECyclin B was predominantly nuclear during interphase, with maximal nuclear accumulation in late G2. NIMXCDC2 colocalized with NIMECyclin B in G2 cells. Although inactivation of NIMA using either the nimA1 or nimA5 temperature-sensitive mutations blocked cells in G2, NIMXCDC2/NIMECyclin B localization was predominantly cytoplasmic rather than nuclear. Second, we found that nimA interacts genetically with sonA, which is a homologue of the yeast nucleocytoplasmic transporter GLE2/RAE1. Mutations in sonA were identified as allele-specific suppressors of nimA1. The sonA1 suppressor alleviated the nuclear division and NIMECyclin B localization defects of nimA1 cells without markedly increasing NIMXCDC2 or NIMA kinase activity. These results indicate that NIMA promotes the nuclear localization of the NIMXCDC2/ NIMECyclin B complex, by a process involving SONA. This mechanism may be involved in coordinating the functions of NIMXCDC2 and NIMA in the regulation of mitosis.

scholarly journals Regulation of the mRNA levels of nimA, a gene required for the G2-M transition in Aspergillus nidulans.

1987 ◽  
Vol 104 (6) ◽  
pp. 1495-1504 ◽  
Author(s):  
S A Osmani ◽  
G S May ◽  
N R Morris
Keyword(s):  
Cell Cycle ◽  
Aspergillus Nidulans ◽  
Cell Cycle Control ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Mrna Levels ◽  
Antimitotic Agent

The temperature-sensitive cell cycle mutation nimA5 causes nuclei of Aspergillus nidulans to be blocked in late G2 at restrictive temperature. Under these conditions the spindle pole body divides but does not separate and the mitotic index drops to zero. If nimA5 is blocked for more than one doubling time and then shifted from restrictive to permissive temperature, nuclei immediately enter mitosis, the mitotic spindle forms, and the chromosomes condense (Oakley, B. R., and N. R. Morris, 1983, J. Cell Biol., 96:1155-8). We have cloned the wild-type nimA gene by DNA-mediated complementation of the nimA5 mutant phenotype and have characterized nimA mRNA expression by Northern blot analysis. The transcript is 3.6 kb in length and is under tight nuclear cycle regulation. In synchronously dividing cells, the levels of nimA mRNA become elevated as cells enter mitosis and drop sharply as cells progress through mitosis. Cells blocked in S-phase with hydroxyurea have very low levels of nimA mRNA. Cells blocked in mitosis, either by the antimitotic agent benomyl or by the cell cycle mutation bimE7, maintain elevated levels of the nimA transcript. These data demonstrate not only that nimA is required for entry into mitosis, but because the transcript is normally expressed cyclically and is under tight cell cycle control, they suggest that nimA may play a regulatory role in the initiation of mitosis.

scholarly journals New Alleles of the YeastMPS1Gene Reveal Multiple Requirements in Spindle Pole Body Duplication

1998 ◽  
Vol 9 (4) ◽  
pp. 759-774 ◽  
Author(s):  
Amy R. Schutz ◽  
Mark Winey
Keyword(s):  
Protein Kinase ◽  
Spindle Assembly Checkpoint ◽  
Single Point ◽  
Spindle Pole Body ◽  
Spindle Assembly ◽  
Spindle Pole ◽  
Single Point Mutation ◽  
Temperature Sensitive ◽  
Pole Body

In Saccharomyces cerevisiae, the Mps1p protein kinase is critical for both spindle pole body (SPB) duplication and the mitotic spindle assembly checkpoint. The mps1–1mutation causes failure early in SPB duplication, and because the spindle assembly checkpoint is also compromised, mps1–1cells proceed with a monopolar mitosis and rapidly lose viability. Here we report the genetic and molecular characterization ofmps1–1 and five new temperature-sensitive alleles ofMPS1. Each of the six alleles contains a single point mutation in the region of the gene encoding the protein kinase domain. The mutations affect several residues conserved among protein kinases, most notably the invariant glutamate in subdomain III. In vivo and in vitro kinase activity of the six epitope-tagged mutant proteins varies widely. Only two display appreciable in vitro activity, and interestingly, this activity is not thermolabile under the assay conditions used. While five of the six alleles cause SPB duplication to fail early, yielding cells with a single SPB, mps1–737cells proceed into SPB duplication and assemble a second SPB that is structurally defective. This phenotype, together with the observation of intragenic complementation between this unique allele and two others, suggests that Mps1p is required for multiple events in SPB duplication.

Sign in / Sign up

Export Citation Format

Share Document