scholarly journals Regulation of the mRNA levels of nimA, a gene required for the G2-M transition in Aspergillus nidulans.

1987 ◽  
Vol 104 (6) ◽  
pp. 1495-1504 ◽  
Author(s):  
S A Osmani ◽  
G S May ◽  
N R Morris
Keyword(s):  
Cell Cycle ◽  
Aspergillus Nidulans ◽  
Cell Cycle Control ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Mrna Levels ◽  
Antimitotic Agent

The temperature-sensitive cell cycle mutation nimA5 causes nuclei of Aspergillus nidulans to be blocked in late G2 at restrictive temperature. Under these conditions the spindle pole body divides but does not separate and the mitotic index drops to zero. If nimA5 is blocked for more than one doubling time and then shifted from restrictive to permissive temperature, nuclei immediately enter mitosis, the mitotic spindle forms, and the chromosomes condense (Oakley, B. R., and N. R. Morris, 1983, J. Cell Biol., 96:1155-8). We have cloned the wild-type nimA gene by DNA-mediated complementation of the nimA5 mutant phenotype and have characterized nimA mRNA expression by Northern blot analysis. The transcript is 3.6 kb in length and is under tight nuclear cycle regulation. In synchronously dividing cells, the levels of nimA mRNA become elevated as cells enter mitosis and drop sharply as cells progress through mitosis. Cells blocked in S-phase with hydroxyurea have very low levels of nimA mRNA. Cells blocked in mitosis, either by the antimitotic agent benomyl or by the cell cycle mutation bimE7, maintain elevated levels of the nimA transcript. These data demonstrate not only that nimA is required for entry into mitosis, but because the transcript is normally expressed cyclically and is under tight cell cycle control, they suggest that nimA may play a regulatory role in the initiation of mitosis.

The PHOA and PHOB Cyclin-Dependent Kinases Perform an Essential Function in Aspergillus nidulans

Genetics ◽  
2003 ◽  
Vol 165 (3) ◽  
pp. 1105-1115
Author(s):  
Xiaowei Dou ◽  
Dongliang Wu ◽  
Weiling An ◽  
Jonathan Davies ◽  
Shahr B Hashmi ◽  
...  
Keyword(s):  
Cell Cycle ◽  
Aspergillus Nidulans ◽  
Nuclear Division ◽  
Cell Cycle Control ◽  
Dominant Negative ◽  
Null Alleles ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Cyclin Dependent Kinase ◽  
Essential Function

Abstract Unlike Pho85 of Saccharomyces cerevisiae, the highly related PHOA cyclin-dependent kinase (CDK) of Aspergillus nidulans plays no role in regulation of enzymes involved in phosphorous acquisition but instead modulates differentiation in response to environmental conditions, including limited phosphorous. Like PHO85, Aspergillus phoA is a nonessential gene. However, we find that expression of dominant-negative PHOA inhibits growth, suggesting it may have an essential but redundant function. Supporting this we have identified another cyclin-dependent kinase, PHOB, which is 77% identical to PHOA. Deletion of phoB causes no phenotype, even under phosphorous-limited growth conditions. To investigate the function of phoA/phoB, double mutants were selected from a cross of strains containing null alleles and by generating a temperature-sensitive allele of phoA in a ΔphoB background. Double-deleted ascospores were able to germinate but had a limited capacity for nuclear division, suggesting a cell cycle defect. Longer germination revealed morphological defects. The temperature-sensitive phoA allele caused both nuclear division and polarity defects at restrictive temperature, which could be complemented by expression of mammalian CDK5. Therefore, an essential function exists in A. nidulans for the Pho85-like kinase pair PHOA and PHOB, which may involve cell cycle control and morphogenesis.

scholarly journals A Proteasome Cap Subunit Required for Spindle Pole Body Duplication in Yeast

1997 ◽  
Vol 137 (3) ◽  
pp. 539-553 ◽  
Author(s):  
Heather B. McDonald ◽  
Breck Byers
Keyword(s):  
Cell Cycle ◽  
Cell Cycle Progression ◽  
Fluorescent Protein ◽  
Sequence Similarity ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Protein Fusion ◽  
Pole Body

Proteasome-mediated protein degradation is a key regulatory mechanism in a diversity of complex processes, including the control of cell cycle progression. The selection of substrates for degradation clearly depends on the specificity of ubiquitination mechanisms, but further regulation may occur within the proteasomal 19S cap complexes, which attach to the ends of the 20S proteolytic core and are thought to control entry of substrates into the core. We have characterized a gene from Saccharomyces cerevisiae that displays extensive sequence similarity to members of a family of ATPases that are components of the 19S complex, including human subunit p42 and S. cerevisiae SUG1/ CIM3 and CIM5 products. This gene, termed PCS1 (for proteasomal cap subunit), is identical to the recently described SUG2 gene (Russell, S.J., U.G. Sathyanarayana, and S.A. Johnston. 1996. J. Biol. Chem. 271:32810– 32817). We have shown that PCS1 function is essential for viability. A temperature-sensitive pcs1 strain arrests principally in the second cycle after transfer to the restrictive temperature, blocking as large-budded cells with a G2 content of unsegregated DNA. EM reveals that each arrested pcs1 cell has failed to duplicate its spindle pole body (SPB), which becomes enlarged as in other monopolar mutants. Additionally, we have shown localization of a functional Pcs1–green fluorescent protein fusion to the nucleus throughout the cell cycle. We hypothesize that Pcs1p plays a role in the degradation of certain potentially nuclear component(s) in a manner that specifically is required for SPB duplication.

scholarly journals Studies concerning the temporal and genetic control of cell polarity in Saccharomyces cerevisiae.

1991 ◽  
Vol 114 (3) ◽  
pp. 515-532 ◽  
Author(s):  
M Snyder ◽  
S Gehrung ◽  
B D Page
Keyword(s):  
Cell Cycle ◽  
Cell Polarity ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Yeast Cells ◽  
Cell Cycle Distribution ◽  
Restrictive Temperature ◽  
Microtubule Bundle ◽  
Pole Body ◽  
Capture Site

The establishment of cell polarity was examined in the budding yeast, S. cerevisiae. The distribution of a polarized protein, the SPA2 protein, was followed throughout the yeast cell cycle using synchronized cells and cdc mutants. The SPA2 protein localizes to a patch at the presumptive bud site of G1 cells. Later it concentrates at the bud tip in budded cells. At cytokinesis, the SPA2 protein is at the neck between the mother and daughter cells. Analysis of unbudded haploid cells has suggested a series of events that occurs during G1. The SPA2 patch is established very early in G1, while the spindle pole body residues on the distal side of the nucleus. Later, microtubules emanating from the spindle pole body intersect the SPA2 crescent, and the nucleus probably rotates towards the SPA2 patch. By middle G1, most cells contain the SPB on the side of the nucleus proximal to the SPA2 patch, and a long extranuclear microtubule bundle intersects this patch. We suggest that a microtubule capture site exists in the SPA2 staining region that stabilizes the long microtubule bundle; this capture site may be responsible for rotation of the nucleus. Cells containing a polarized distribution of the SPA2 protein also possess a polarized distribution of actin spots in the same region, although the actin staining is much more diffuse. Moreover, cdc4 mutants, which form multiple buds at the restrictive temperature, exhibit simultaneous staining of the SPA2 protein and actin spots in a subset of the bud tips. spa2 mutants contain a polarized distribution of actin spots, and act1-1 and act1-2 mutants often contain a polarized distribution of the SPA2 protein suggesting that the SPA2 protein is not required for localization of the actin spots and the actin spots are not required for localization of the SPA2 protein. cdc24 mutants, which fail to form buds at the restrictive temperature, fail to exhibit polarized localization of the SPA2 protein and actin spots, indicating that the CDC24 protein is directly or indirectly responsible for controlling the polarity of these proteins. Based on the cell cycle distribution of the SPA2 protein, a "cytokinesis tag" model is proposed to explain the mechanism of the non-random positioning of bud sites in haploid yeast cells.

scholarly journals Cell cycle arrest of cdc mutants and specificity of the RAD9 checkpoint.

Genetics ◽  
1993 ◽  
Vol 134 (1) ◽  
pp. 63-80 ◽  
Author(s):  
T A Weinert ◽  
L H Hartwell
Keyword(s):  
Cell Cycle ◽  
Cell Division ◽  
Dna Replication ◽  
Cell Cycle Control ◽  
Dna Lesions ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
A Cell ◽  
G2 Phase ◽  
Rad Mutants

Abstract In eucaryotes a cell cycle control called a checkpoint ensures that mitosis occurs only after chromosomes are completely replicated and any damage is repaired. The function of this checkpoint in budding yeast requires the RAD9 gene. Here we examine the role of the RAD9 gene in the arrest of the 12 cell division cycle (cdc) mutants, temperature-sensitive lethal mutants that arrest in specific phases of the cell cycle at a restrictive temperature. We found that in four cdc mutants the cdc rad9 cells failed to arrest after a shift to the restrictive temperature, rather they continued cell division and died rapidly, whereas the cdc RAD cells arrested and remained viable. The cell cycle and genetic phenotypes of the 12 cdc RAD mutants indicate the function of the RAD9 checkpoint is phase-specific and signal-specific. First, the four cdc RAD mutants that required RAD9 each arrested in the late S/G2 phase after a shift to the restrictive temperature when DNA replication was complete or nearly complete, and second, each leaves DNA lesions when the CDC gene product is limiting for cell division. Three of the four CDC genes are known to encode DNA replication enzymes. We found that the RAD17 gene is also essential for the function of the RAD9 checkpoint because it is required for phase-specific arrest of the same four cdc mutants. We also show that both X- or UV-irradiated cells require the RAD9 and RAD17 genes for delay in the G2 phase. Together, these results indicate that the RAD9 checkpoint is apparently activated only by DNA lesions and arrests cell division only in the late S/G2 phase.

DIPLOID SPORE FORMATION AND OTHER MEIOTIC EFFECTS OF TWO CELL-DIVISION-CYCLE MUTATIONS OF SACCHAROMYCES CEREVISIAE

Genetics ◽  
1980 ◽  
Vol 96 (4) ◽  
pp. 859-876 ◽  
Author(s):  
David Schild ◽  
Breck Byers
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Division ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Cell Division Cycle ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Single Spore ◽  
Diploid Cells ◽  
Meiosis I

ABSTRACT The meiotic effects of two cell-division-cycle mutations of Saccharomyces cerevisiae (cdc5 and cdc14) have been examined. These mutations were isolated by L. H. Hartwell and his colleagues and characterized as defective in mitosis, causing a temperature-sensitive arrest in late nuclear division. When subjected to the restrictive temperature in meiosis, diploid cells homozygous for either of these mutations generally proceeded through premeiotic DNA synthesis and commitment to meiotic levels of recombination, but then arrested at a stage following spindle pole body (SPB) duplication and separation. The two SPBs lacked the interconnection by spindle microtubules typical of the complete meiosis I spindle. Challenge of these homozygotes by a semi-restrictive temperature often caused the production of asci containing two diploid spores. Genetic analysis of the viable pairs of spores revealed that each spore had become homozygous for centromere-linked markers significantly more frequently than for distal markers, indicating that the two spores each contained pairs of sister centromeres that had co-segregated in the reductional division of meiosis I. Ultrastructural analysis of the cdc5 homozygote demonstrated that these cells had completed meiosis I and formed two meiosis II spindles, but that the latter remained unusually short. This resulted in the encapsulation of both poles of each spindle within a single spore wall. These mutations therefore are defective in both meiotic divisions, as well as in the mitotic division described originally.

Yeast L double-stranded ribonucleic acid is synthesized during the G1 phase but not the S phase of the cell cycle

1981 ◽  
Vol 1 (8) ◽  
pp. 673-679
Author(s):  
V A Zakian ◽  
D W Wagner ◽  
W L Fangman
Keyword(s):  
Cell Cycle ◽  
Deoxyribonucleic Acid ◽  
Cell Cycle Control ◽  
S Phase ◽  
G1 Phase ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Phase Synthesis ◽  
Ribonucleic Acids ◽  
Alpha Factor

The cytoplasm of Saccharomyces cerevisiae contains two major classes of protein-encapsulated double-stranded ribonucleic acids (dsRNA's), L and M. Replication of L and M dsRNA's was examined in cells arrested in the G1 phase by either alpha-factor, a yeast mating pheromone, or the restrictive temperature for a cell cycle mutant (cdc7). [3H]uracil was added during the arrest periods to cells prelabeled with [14C]uracil, and replication was monitored by determining the ratio of 3H/14C for purified dsRNA's. Like mitochondrial deoxyribonucleic acid, both L and M dsRNA's were synthesized in the G1 arrested cells. The replication of L dsRNA was also examined during the S phase, using cells synchronized in two different ways. Cells containing the cdc7 mutation, treated sequentially with alpha-factor and then the restrictive temperature, enter a synchronous S phase when transferred to permissive temperature. When cells entered the S phase, synthesis of L dsRNA ceased, and little or no synthesis was detected throughout the S phase. Synthesis of L dsRNA was also observed in G1 phase cells isolated from asynchronous cultures by velocity centrifugation. Again, synthesis ceased when cells entered the S phase. These results indicate that L dsRNA replication is under cell cycle control. The control differs from that of mitochondrial deoxyribonucleic acid, which replicates in all phases of the cell cycle, and from that of 2-micron DNA, a multiple-copy plasmid whose replication is confined to the S phase.

scholarly journals Role of calmodulin and Spc110p interaction in the proper assembly of spindle pole body compenents.

1996 ◽  
Vol 133 (1) ◽  
pp. 111-124 ◽  
Author(s):  
H A Sundberg ◽  
L Goetsch ◽  
B Byers ◽  
T N Davis
Keyword(s):  
Spindle Pole Body ◽  
Spindle Pole ◽  
Immunofluorescent Staining ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Nonpermissive Temperature ◽  
Carboxy Terminus ◽  
Calmodulin Binding ◽  
Pole Body ◽  
Mutant Cells

Previously we demonstrated that calmodulin binds to the carboxy terminus of Spc110p, an essential component of the Saccharomyces cerevisiae spindle pole body (SPB), and that this interaction is required for chromosome segregation. Immunoelectron microscopy presented here shows that calmodulin and thus the carboxy terminus of Spc110p localize to the central plaque. We created temperature-sensitive SPC110 mutations by combining PCR mutagenesis with a plasmid shuffle strategy. The temperature-sensitive allele spc110-220 differs from wild type at two sites. The cysteine 911 to arginine mutation resides in the calmodulin-binding site and alone confers a temperature-sensitive phenotype. Calmodulin overproduction suppresses the temperature sensitivity of spc110-220. Furthermore, calmodulin levels at the SPB decrease in the mutant cells at the restrictive temperature. Thus, calmodulin binding to Spc110-220p is defective at the nonpermissive temperature. Synchronized mutant cells incubated at the nonpermissive temperature arrest as large budded cells with a G2 content of DNA and suffer considerable lethality. Immunofluorescent staining demonstrates failure of nuclear DNA segregation and breakage of many spindles. Electron microscopy reveals an aberrant nuclear structure, the intranuclear microtubule organizer (IMO), that differs from a SPB but serves as a center of microtubule organization. The IMO appears during nascent SPB formation and disappears after SPB separation. The IMO contains both the 90-kD and the mutant 110-kD SPB components. Our results suggest that disruption of the calmodulin Spc110p interaction leads to the aberrant assembly of SPB components into the IMO, which in turn perturbs spindle formation.

scholarly journals Spindle Pole Body Duplication in Fission Yeast Occurs at the G1/S Boundary but Maturation Is Blocked until Exit from S by an Event Downstream of Cdc10+

2004 ◽  
Vol 15 (12) ◽  
pp. 5219-5230 ◽  
Author(s):  
Satoru Uzawa ◽  
Fei Li ◽  
Ye Jin ◽  
Kent L. McDonald ◽  
Michael B. Braunfeld ◽  
...  
Keyword(s):  
Fission Yeast ◽  
Spindle Pole Body ◽  
Specific Inhibitor ◽  
Spindle Pole ◽  
Feedback Mechanism ◽  
G1 Arrest ◽  
Restrictive Temperature ◽  
Permissive Temperature ◽  
Pole Body ◽  
In Cells

The regulation and timing of spindle pole body (SPB) duplication and maturation in fission yeast was examined by transmission electron microscopy. When cells are arrested at G1 by nitrogen starvation, the SPB is unduplicated. On release from G1, the SPBs were duplicated after 1–2 h. In cells arrested at S by hydroxyurea, SPBs are duplicated but not mature. In G1 arrest/release experiments with cdc2.33 cells at the restrictive temperature, SPBs remained single, whereas in cells at the permissive temperature, SPBs were duplicated. In cdc10 mutant cells, the SPBs seem not only to be duplicated but also to undergo partial maturation, including invagination of the nuclear envelope underneath the SPB. There may be an S-phase–specific inhibitor of SPB maturation whose expression is under control of cdc10+. This model was examined by induction of overreplication of the genome by overexpression of rum1p or cdc18p. In cdc18p-overexpressing cells, the SPBs are duplicated but not mature, suggesting that cdc18p is one component of this feedback mechanism. In contrast, cells overexpressing rum1p have large, deformed SPBs accompanied by other features of maturation and duplication. We propose a feedback mechanism for maturation of the SPB that is coupled with exit from S to trigger morphological changes.

scholarly journals MIF2 is required for mitotic spindle integrity during anaphase spindle elongation in Saccharomyces cerevisiae.

1993 ◽  
Vol 123 (2) ◽  
pp. 387-403 ◽  
Author(s):  
M T Brown ◽  
L Goetsch ◽  
L H Hartwell
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Structural Integrity ◽  
Spindle Pole ◽  
Chromosome Loss ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
In Vitro Mutagenesis ◽  
Spindle Elongation

The function of the essential MIF2 gene in the Saccharomyces cerevisiae cell cycle was examined by overepressing or creating a deficit of MIF2 gene product. When MIF2 was overexpressed, chromosomes missegregated during mitosis and cells accumulated in the G2 and M phases of the cell cycle. Temperature sensitive mutants isolated by in vitro mutagenesis delayed cell cycle progression when grown at the restrictive temperature, accumulated as large budded cells that had completed DNA replication but not chromosome segregation, and lost viability as they passed through mitosis. Mutant cells also showed increased levels of mitotic chromosome loss, supersensitivity to the microtubule destabilizing drug MBC, and morphologically aberrant spindles. mif2 mutant spindles arrested development immediately before anaphase spindle elongation, and then frequently broke apart into two disconnected short half spindles with misoriented spindle pole bodies. These findings indicate that MIF2 is required for structural integrity of the spindle during anaphase spindle elongation. The deduced Mif2 protein sequence shared no extensive homologies with previously identified proteins but did contain a short region of homology to a motif involved in binding AT rich DNA by the Drosophila D1 and mammalian HMGI chromosomal proteins.

scholarly journals A Temperature-Sensitive dcw1 Mutant of Saccharomyces cerevisiae Is Cell Cycle Arrested with Small Buds Which Have Aberrant Cell Walls

2004 ◽  
Vol 3 (5) ◽  
pp. 1297-1306 ◽  
Author(s):  
Hiroshi Kitagaki ◽  
Kiyoshi Ito ◽  
Hitoshi Shimoi
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cell Wall ◽  
Cell Walls ◽  
Spindle Pole ◽  
Temperature Sensitive ◽  
Mrna Levels ◽  
Homologous Proteins ◽  
Aberrant Cell ◽  
Cell Wall Biogenesis

ABSTRACT Dcw1p and Dfg5p in Saccharomyces cerevisiae are homologous proteins that were previously shown to be involved in cell wall biogenesis and to be essential for growth. Dcw1p was found to be a glycosylphosphatidylinositol-anchored membrane protein. To investigate the roles of these proteins in cell wall biogenesis and cell growth, we constructed mutant alleles of DCW1 by random mutagenesis, introduced them into a Δdcw1 Δdfg5 background, and isolated a temperature-sensitive mutant, DC61 (dcw1-3 Δdfg5). When DC61 cells were incubated at 37°C, most cells had small buds, with areas less than 20% of those of the mother cells. This result indicates that DC61 cells arrest growth with small buds at 37°C. At 37°C, fewer DC61 cells had 1N DNA content and most of them still had a single nucleus located apart from the bud neck. In addition, in DC61 cells incubated at 37°C, bipolar spindles were not formed. These results indicate that DC61 cells, when incubated at 37°C, are cell cycle arrested after DNA replication and prior to the separation of spindle pole bodies. The small buds of DC61 accumulated chitin in the bud cortex, and some of them were lysed, which indicates that they had aberrant cell walls. A temperature-sensitive dfg5 mutant, DF66 (Δdcw1 dfg5-29), showed similar phenotypes. DCW1 and DFG5 mRNA levels peaked in the G1 and S phases, respectively. These results indicate that Dcw1p and Dfg5p are involved in bud formation through their involvement in biogenesis of the bud cell wall.

Sign in / Sign up

Export Citation Format

Share Document