Vibration measurement of a cantilever beam using root embedded piezoceramic sensor

2008 ◽  
Vol 222 (2) ◽  
pp. 147-161 ◽  
Author(s):  
M Sunar ◽  
B O Al-Bedoor
Keyword(s):  
Cantilever Beam ◽  
Experimental Studies ◽  
Finite Element Approximation ◽  
Vibration Measurement ◽  
Element Approximation ◽  
Structural Vibrations ◽  
Vibration Signals ◽  
Rotating Blade ◽  
Set Up ◽  
Transient And Steady State

Numerical and experimental studies are carried out to investigate the usability of a piezoceramic (PZT) sensor placed in the root of a stationary cantilever beam for measuring structural vibrations. The ability of the sensor for picking up the vibration signals during both the transient and steady-state phases is investigated. The piezoelectric equations obtained using the Hamilton's principle together with the finite-element approximation are utilized to extract the voltage outputs of the PZT sensor. An experimental set-up, to validate the theoretical results, is designed and manufactured. The experimentally measured sensor voltages are compared with the numerical ones. The results showed the excellent performance of the sensors in reading vibration signals of the beam. The root embedded PZT approach is an important step towards the application of measuring rotating blade vibrations.

New Mixed Finite Element Formulations for Transient and Steady State Creep Problems

1989 ◽  
Vol 42 (11S) ◽  
pp. S150-S156
Author(s):  
Abimael F. D. Loula ◽  
Joa˜o Nisan C. Guerreiro
Keyword(s):  
Finite Element ◽  
Steady State ◽  
Mixed Finite Element ◽  
Finite Element Approximation ◽  
Steady State Creep ◽  
Element Approximation ◽  
New Approach ◽  
Finite Element Approximations ◽  
Transient Problems ◽  
Transient And Steady State

We apply the mixed Petrov–Galerkin formulation to construct finite element approximations for transient and steady-state creep problems. With the new approach we recover stability, convergence, and accuracy of some Galerkin unstable approximations. We also present the main results on the numerical analysis and error estimates of the proposed finite element approximation for the steady problem, and discuss the asymptotic behavior of the continuum and discrete transient problems.

Application of entropy in identification of breathing cracks in a beam structure: Simulations and experimental studies

2017 ◽  
Vol 17 (3) ◽  
pp. 549-564 ◽  
Author(s):  
Buddhi Wimarshana ◽  
Nan Wu ◽  
Christine Wu
Keyword(s):  
Cantilever Beam ◽  
Time Domain ◽  
Fatigue Cracks ◽  
Unit Length ◽  
Crack Depth ◽  
Experimental Studies ◽  
Sample Entropy ◽  
Breathing Crack ◽  
Engineering Structures ◽  
Vibration Signals

A cantilever beam with a breathing crack is studied to detect the crack and evaluate the crack depth using entropy measures. During the vibration in engineering structures, fatigue cracks undergo the status from close-to-open (and open-to-close) repetitively leading to a crack breathing phenomenon. Entropy is a measure, which can quantify the complexity or irregularity in system dynamics, and hence employed to quantify the bi-linearity/irregularity of the vibration response, which is induced by the breathing phenomenon of a crack. A mathematical model of harmonically excited unit length steel cantilever beam with a breathing crack located near the fixed end is established, and an iterative numerical method is applied to generate accurate time domain vibration responses. The steady-state time domain vibration signals are pre-processed with wavelet transformation, and the bi-linearity/irregularity of the vibration signals due to breathing effect is then successfully quantified using both sample entropy and quantized approximation of sample entropy to detect and estimate the crack depth. It is observed that the method is capable of identifying crack depths even at very early stages of 3% of the beam thickness with significant increment in the entropy values (more than 200%) compared to the healthy beam. In addition, experimental studies are conducted, and the simulation results are in good agreement with the experimental results. The proposed technique can also be applied to damage identification in other types of structures, such as plates and shells.

scholarly journals Application of intelligent orienteering based on Internet of things

2020 ◽  
Vol 2020 (1) ◽  
Author(s):  
Donghui Zhang ◽  
Ruijie Liu
Keyword(s):  
Internet Of Things ◽  
Network Architecture ◽  
Emergency Services ◽  
Simulation Experiment ◽  
Experimental Studies ◽  
Signal Stability ◽  
Anchor Nodes ◽  
Set Up ◽  
The Relationship ◽  
The Internet Of Things

Abstract Orienteering has gradually changed from a professional sport to a civilian sport. Especially in recent years, orienteering has been widely popularized. Many colleges and universities in China have also set up this course. With the improvement of people’s living conditions, orienteering has really become a leisure sport in modern people’s life. The reduced difficulty of sports enables more people to participate, but it also exposes a series of problems. As the existing positioning technology is relatively backward, the progress in personnel tracking, emergency services, and other aspects is slow. To solve these problems, a new intelligent orienteering application system is developed based on the Internet of things. ZigBee network architecture is adopted in the system. ZigBee is the mainstream scheme in the current wireless sensor network technology, which has many advantages such as convenient carrying, low power consumption, and signal stability. Due to the complex communication environment in mobile signal, the collected information is processed by signal amplification and signal anti-interference technology. By adding anti-interference devices, video isolators and other devices, the signal is guaranteed to the maximum extent. In order to verify the actual effect of this system, through a number of experimental studies including the relationship between error and traffic radius and the relationship between coverage and the number of anchor nodes, the data shows that the scheme studied in this paper has a greater improvement in comprehensive performance than the traditional scheme, significantly improving the accuracy and coverage. Especially the coverage is close to 100% in the simulation experiment. This research has achieved good results and can be widely used in orienteering training and competition.

Monosaccharide Biosynthesis Pathways Database

Glycobiology ◽  
2021 ◽  
Author(s):  
Jaya Srivastava ◽  
P Sunthar ◽  
Petety V Balaji
Keyword(s):  
Expression Profiling ◽  
Experimental Studies ◽  
Structural Complexity ◽  
Evolutionary Relationships ◽  
Enzyme Assays ◽  
Biosynthesis Pathway ◽  
Knock Out ◽  
Set Up ◽  
Function Relationship ◽  
Natural Glycans

Abstract A distinctive feature of glycans vis-à-vis proteins and nucleic acids is its structural complexity which arises from the huge repertoire of monosaccharides, isomeric linkages and branching. A very large number of monosaccharides have so far been discovered in natural glycans. Experimentally, pathways for the biosynthesis have been characterized completely for 55 monosaccharides and partially for a few more. However, there is no single platform which provides information about monosaccharide biosynthesis pathways and associated enzymes We have gathered 572 experimentally characterized enzymes of 66 biosynthesis pathways from literature and set up a first of its kind database called the Monosaccharide Biosynthesis Pathways Database http://www.bio.iitb.ac.in/mbpd/). Annotations such as the reaction catalysed, substrate specificity, biosynthesis pathway and PubMed IDs are provided for all the enzymes in the database. Sequence homologs of the experimentally characterized enzymes found in nearly 13,000 completely sequenced genomes from Bacteria and Archaea have also been included in the database. This platform will help in the deduction of evolutionary relationships among enzymes such as aminotransferases, nucleotidyltransferases, acetyltransferases and SDR family enzymes. It can also facilitate experimental studies such as direct enzyme assays to validate putative annotations, establish structure–function relationship, expression profiling to determine the function, determine the phenotypic consequences of gene knock-out/knock-in and complementation studies.

Intelligent diagnosis and analysis of brain lymphoma based on imaging features

2021 ◽  
pp. 1-11
Author(s):  
Yipu Mao ◽  
Muliang Jiang ◽  
Fanyu Zhao ◽  
Liling Long
Keyword(s):  
Imaging Techniques ◽  
Experimental Studies ◽  
Diagnostic Value ◽  
Imaging Features ◽  
Flow Properties ◽  
Brain Lymphoma ◽  
Diagnosis And Prognosis ◽  
Primary Brain Lymphoma ◽  
Set Up ◽  
Prognosis Evaluation

Currently, DSC has been extensively studied in the diagnosis, differential diagnosis and prognosis evaluation of brain lymphoma, but it has not obtained a uniform standard. By combining DSC imaging features, this study investigated the imaging features and diagnostic value of several types of tumors such as primary brain lymphoma. At the same time, this study obtained data from brain lymphoma patients by data collection and set up different groups to conduct experimental studies to explore the correlation between IVIM-MRI perfusion parameters and DSC perfusion parameters in brain lymphoma. Through experimental research, it can be seen that the combination of two perfusion imaging techniques can more fully reflect the blood flow properties of the lesion, which is beneficial to determine the nature of the lesion.

An Angular Finite Element Method for the Solution of the Even-Parity Equation

2009 ◽  
Author(s):  
R. Becker ◽  
R. Koch ◽  
M. F. Modest ◽  
H.-J. Bauer
Keyword(s):  
Finite Element ◽  
Finite Element Approximation ◽  
Basis Functions ◽  
New Method ◽  
Discrete Ordinates ◽  
Test Case ◽  
Element Approximation ◽  
Promising Alternative ◽  
Element Discretization ◽  
Spatial Coordinates

The present article introduces a new method to solve the radiative transfer equation (RTE). First, a finite element discretization of the solid angle dependence is derived, wherein the coefficients of the finite element approximation are functions of the spatial coordinates. The angular basis functions are defined according to finite element principles on subdivisions of the octahedron. In a second step, these spatially dependent coefficients are discretized by spatial finite elements. This approach is very attractive, since it provides a concise derivation for approximations of the angular dependence with an arbitrary number of angular nodes. In addition, the usage of high-order angular basis functions is straightforward. In the current paper the governing equations are first derived independently of the actual angular approximation. Then, the design principles for the angular mesh are discussed and the parameterization of the piecewise angular basis functions is derived. In the following, the method is applied to two-dimensional test cases which are commonly used for the validation of approximation methods of the RTE. The results reveal that the proposed method is a promising alternative to the well-established practices like the Discrete Ordinates Method (DOM) and provides highly accurate approximations. A test case known to exhibit the ray effect in the DOM verifies the ability of the new method to avoid ray effects.

Finite Element Approximation of the p-Laplacian

1993 ◽  
Vol 61 (204) ◽  
pp. 523 ◽  
Author(s):  
John W. Barrett ◽  
W. B. Liu
Keyword(s):  
Finite Element ◽  
Finite Element Approximation ◽  
Element Approximation
Sign in / Sign up

Export Citation Format

Share Document