scholarly journals Effects Of Shoe Midfoot Bending Stiffness On Inner-foot Joints Rom During Heel-toe Running

2021 ◽  
Vol 53 (8S) ◽  
pp. 160-161
Author(s):  
Ruiya Ma ◽  
Feng Qu
Keyword(s):  
Bending Stiffness ◽  
Foot Joints

CALCULATION-EXPERIMENTAL METHOD FOR DEFINITION OF LOWEST FREQUENCY IN BENDING VIBRATIONS OF COACH CAR BODY IN VERTICAL PLANE BASED ON IDENTIFICATION OF ITS BENDING STIFFNESS

2020 ◽  
Vol 2020 (9) ◽  
pp. 35-46
Author(s):  
Aleksandr Skachkov ◽  
Viktor Vasilevskiy ◽  
Aleksey Yuhnevskiy
Keyword(s):  
Least Squares Method ◽  
Vertical Plane ◽  
Bending Stiffness ◽  
Dimensional Problem ◽  
Euler Beam ◽  
Bending Vibrations ◽  
Car Body ◽  
Variable Function ◽  
Experimental Values ◽  
Definition Of

The consideration of existing methods for a modal analysis has shown a possibility for the lowest frequency definition of bending vibrations in a coach car body in a vertical plane based on an indirect method reduced to the assessment of the bending stiffness of the one-dimensional model as a Bernoulli-Euler beam with fragment-constant parameters. The assessment mentioned can be obtained by means of the comparison of model deflections (rated) and a prototype (measured experimentally upon a natural body) with the use of the least-squares method that results in the necessity of the solution of the multi-dimensional problem with the reverse coefficient. The introduction of the hypothesis on ratability of real bending stiffness of the prototype and easily calculated geometrical stiffness of a model reduces a multi-dimensional problem incorrect according to Adamar to the simplest search of the extremum of one variable function. The procedure offered for the indirect assessment of bending stiffness was checked through the solution of model problems. The values obtained are offered to use for the assessment of the lowest frequency of bending vibrations with the aid of Ritz and Grammel methods. In case of rigid poles it results in formulae for frequencies into which there are included directly the experimental values of deflections.

scholarly journals Beam Theory of Thermal–Electro-Mechanical Coupling for Single-Wall Carbon Nanotubes

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 923
Author(s):  
Kun Huang ◽  
Ji Yao
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Beam Theory ◽  
Bending Stiffness ◽  
Single Wall Carbon Nanotubes ◽  
Beam Model ◽  
Euler Beam ◽  
New Model ◽  
Mechanical Coupling ◽  
Electrostatic Fields

The potential application field of single-walled carbon nanotubes (SWCNTs) is immense, due to their remarkable mechanical and electrical properties. However, their mechanical properties under combined physical fields have not attracted researchers’ attention. For the first time, the present paper proposes beam theory to model SWCNTs’ mechanical properties under combined temperature and electrostatic fields. Unlike the classical Bernoulli–Euler beam model, this new model has independent extensional stiffness and bending stiffness. Static bending, buckling, and nonlinear vibrations are investigated through the classical beam model and the new model. The results show that the classical beam model significantly underestimates the influence of temperature and electrostatic fields on the mechanical properties of SWCNTs because the model overestimates the bending stiffness. The results also suggest that it may be necessary to re-examine the accuracy of the classical beam model of SWCNTs.

A Study on the Bending Stiffness of a New DNA Origami Nano-Joint

2021 ◽  
Author(s):  
Sadegh Dastorani ◽  
Reza Hasanzadeh Ghasemi ◽  
Reza Soheilifard
Keyword(s):  
Bending Stiffness ◽  
Dna Origami

scholarly journals Reduction of Bending Stiffness in Synchronous-Belts Cords during Bending Fatigue.

1999 ◽  
Vol 65 (636) ◽  
pp. 3368-3374
Author(s):  
Hiroshi IIZUKA ◽  
Hideo TAKAHASHI ◽  
Toshio TETSUKA
Keyword(s):  
Bending Stiffness ◽  
Bending Fatigue

Evaluating longitudinal bending stiffness testing for performance footwear

2021 ◽  
Vol 13 (sup1) ◽  
pp. S5-S6
Author(s):  
Laura Healey ◽  
Montgomery Bertschy ◽  
Wouter Hoogkamer
Keyword(s):  
Bending Stiffness ◽  
Longitudinal Bending

scholarly journals Annular Defects Impair the Mechanical Stability of the Intervertebral Disc

2021 ◽  
pp. 219256822110060
Author(s):  
Jun-Xin Chen ◽  
Yun-He Li ◽  
Jian Wen ◽  
Zhen Li ◽  
Bin-Sheng Yu ◽  
...  
Keyword(s):  
Intervertebral Disc ◽  
Degrees Of Freedom ◽  
Mechanical Stability ◽  
Biomechanical Testing ◽  
Bending Stiffness ◽  
Biomechanical Study ◽  
Torsional Stiffness ◽  
P Value ◽  
Lateral Bending ◽  
Flexion Extension

Study Design: A biomechanical study. Objectives: The purpose of this study was to investigate the effects of cruciform and square incisions of annulus fibrosus (AF) on the mechanical stability of bovine intervertebral disc (IVD) in multiple degrees of freedom. Methods: Eight bovine caudal IVD motion segments (bone-disc-bone) were obtained from the local abattoir. Cruciform and square incisions were made at the right side of the specimen’s annulus using a surgical scalpel. Biomechanical testing of three-dimensional 6 degrees of freedom was then performed on the bovine caudal motion segments using the mechanical testing and simulation (MTS) machine. Force, displacement, torque and angle were recorded synchronously by the MTS system. P value <.05 was considered statistically significant. Results: Cruciform and square incisions of the AF reduced both axial compressive and torsional stiffness of the IVD and were significantly lower than those of the intact specimens ( P < .01). Left-side axial torsional stiffness of the cruciform incision was significantly higher than a square incision ( P < .01). Neither incision methods impacted flexional-extensional stiffness or lateral-bending stiffness. Conclusions: The cruciform and square incisions of the AF obviously reduced axial compression and axial rotation, but they did not change the flexion-extension and lateral-bending stiffness of the bovine caudal IVD. This mechanical study will be meaningful for the development of new approaches to AF repair and the rehabilitation of the patients after receiving discectomy.

Sign in / Sign up

Export Citation Format

Share Document