scholarly journals RECENT SEISMIC ACTIVITY IN CENTRAL GREECE REVEALING LOCAL SEISMOTECTONIC PROPERTIES

2017 ◽  
Vol 43 (4) ◽  
pp. 2075
Author(s):  
Ch. K. Karamanos ◽  
V. G. Karakostas ◽  
L. Seeber ◽  
E. E. Papadimitriou ◽  
A.A. Kilias
Keyword(s):  
Fault Zone ◽  
Fault Plane ◽  
Focal Mechanisms ◽  
Normal Faulting ◽  
Seismic Excitations ◽  
Lateral Component ◽  
Fault Plane Solutions ◽  
Central Greece ◽  
Source Characteristics ◽  
The Town

The December 2008, M=5.2 earthquake occurred in the Voiotikos–Kifissos basin near the town of Amfikleia in Central Greece and was followed by an intense sequence with hundreds of earthquakes. Mainshock source characteristics derived from the recordings of the Greek National Seismological Network are consistent with previous known earthquakes as well as with the current nearly N–S extensional regime. The adequate azimuthal coverage and the calculated time residuals at each seismological station ensure high location accuracy, whereas the stations operated close to the seismic excitations constrained 80% of the focal depths between 8 and 12km. Distances from the mainshock epicenter to the 10 closest seismological stations vary from 15 to 75 km. Hypoinverse and HypoDD were used for locations, and FPFIT was used for fault plane solutions of events with an adequate number of clear first arrivals. The hypocenters and focal mechanisms illuminate a ≈10km–long fault zone striking nearly E–W with oblique normal faulting and a small left lateral component. The Voiotikos–Kifissos basin is bordered in the south by two left–stepping en echelon segments known as the Pavliani fault zone and the Parnassos detachment, which strike NW and dip NE. In our preferred interpretation, the Amfikleia mainshock ruptured a previously recognized south–dipping fault antithetic to the basin border faults. This fault may be associated with the left step on the border fault, which would be releasing if that fault had a sinistral component.

scholarly journals Stress tensor inversion in Western Greece using earthquake focal mechanisms from the Kozani-Grevena 1995 seismic sequence

1999 ◽  
Vol 42 (4) ◽  
Author(s):  
A. A. Kiratzi
Keyword(s):  
Stress Tensor ◽  
Fault Plane ◽  
Strike Slip ◽  
Focal Mechanisms ◽  
Normal Faulting ◽  
Stress Tensor Inversion ◽  
Fault Plane Solutions ◽  
The North ◽  
Western Greece ◽  
Slip Motion

Stress tensor inversion has been applied to estimate principal stress axes orientations in Western Greece, from 178 earthquake fault plane solutions from the Kozani-Grevena May 13, 1995 sequence. All focal mechanisms were previously determined through the deployment of a dense portable array. The magnitude range is 2.7-6.5 and the depth range is 4.0-15 km. A single stress tensor with an average misfit of 6.5°, small enough to support the assumption of stress homogeneity, can describe the stress field. The maximum compressive stress, s1, has a NNE-SSW trend (N26°E) and a nearly vertical plunge (80°) while the minimum compressive stress, s3, has a NNW-SSE orientation (N159°E) and a shallow plunge (7°) southwards. The scalar quantity, R (stress ratio) was found equal to 0.4 suggesting a transtensional regime (normal faulting with strike-slip motions) in which s2 is compressional. The identification of the fault plane from the auxiliary plane was achieved for 99 fault plane solutions out of 178 in total (56%). Vertical cross sections support previous results concerning the north dipping main fault segments and the south dipping antithetic faulting. The strike-slip motion is mainly dextral, along NNE-SSW structures, which follow the direction of the main neotectonic faults while the scarce sinistral strike-slip motion is connected to NW-SE trending zones of weakness pre-existing the old phase of compression in the Aegean. The strong strike slip motion that supports the transtensional regime probably reflects the effect of the motions of the North Anatolian Fault, taken up by normal faulting in the area of Western Greece.

Aftershocks of the February 21, 1973 Point Mugu, California earthquake

1976 ◽  
Vol 66 (6) ◽  
pp. 1931-1952
Author(s):  
Donald J. Stierman ◽  
William L. Ellsworth
Keyword(s):  
Fault Zone ◽  
Main Shock ◽  
Fault Plane ◽  
Body Wave ◽  
P Wave ◽  
Fault System ◽  
Wave Radiation ◽  
Fault Plane Solutions ◽  
Complex Deformation ◽  
Transverse Ranges

abstract The ML 6.0 Point Mugu, California earthquake of February 21, 1973 and its aftershocks occurred within the complex fault system that bounds the southern front of the Transverse Ranges province of southern California. P-wave fault plane solutions for 51 events include reverse, strike slip and normal faulting mechanisms, indicating complex deformation within the 10-km broad fault zone. Hypocenters of 141 aftershocks fail to delineate any single fault plane clearly associated with the main shock rupture. Most aftershocks cluster in a region 5 km in diameter centered 5 km from the main shock hypocenter and well beyond the extent of fault rupture estimated from analysis of body-wave radiation. Strain release within the imbricate fault zone was controlled by slip on preexisting planes of weakness under the influence of a NE-SW compressive stress.

scholarly journals A functional tool to explore the reliability of micro-earthquake focal mechanism solution for seismotectonic purposes

2021 ◽  
Author(s):  
Guido Maria Adinolfi ◽  
Raffaella De Matteis ◽  
Rita De Nardis ◽  
Aldo Zollo
Keyword(s):  
Focal Mechanism ◽  
Fault Plane ◽  
Focal Mechanisms ◽  
Seismic Network ◽  
Fault System ◽  
Focal Mechanism Solution ◽  
Fault Plane Solutions ◽  
Stress Regime ◽  
Focal Mechanism Solutions ◽  
Earthquake Focal Mechanism

Abstract. Improving the knowledge of seismogenic faults requires the integration of geological, seismological, and geophysical information. Among several analyses, the definition of earthquake focal mechanisms plays an essential role in providing information about the geometry of individual faults and the stress regime acting in a region. Fault plane solutions can be retrieved by several techniques operating in specific magnitude ranges, both in the time and frequency domain and using different data. For earthquakes of low magnitude, the limited number of available data and their uncertainties can compromise the stability of fault plane solutions. In this work, we propose a useful methodology to evaluate how well a seismic network used to monitor natural and/or induced micro-seismicity estimates focal mechanisms as function of magnitude, location, and kinematics of seismic source and consequently their reliability in defining seismotectonic models. To study the consistency of focal mechanism solutions, we use a Bayesian approach that jointly inverts the P/S long-period spectral-level ratios and the P polarities to infer the fault-plane solutions. We applied this methodology, by computing synthetic data, to the local seismic network operated in the Campania-Lucania Apennines (Southern Italy) to monitor the complex normal fault system activated during the Ms 6.9, 1980 earthquake. We demonstrate that the method we propose can have a double purpose. It can be a valid tool to design or to test the performance of local seismic networks and more generally it can be used to assign an absolute uncertainty to focal mechanism solutions fundamental for seismotectonic studies.

scholarly journals A functional tool to explore the reliability of micro-earthquake focal mechanism solutions for seismotectonic purposes

Solid Earth ◽  
2022 ◽  
Vol 13 (1) ◽  
pp. 65-83
Author(s):  
Guido Maria Adinolfi ◽  
Raffaella De Matteis ◽  
Rita de Nardis ◽  
Aldo Zollo
Keyword(s):  
Focal Mechanism ◽  
Fault Plane ◽  
Normal Fault ◽  
Focal Mechanisms ◽  
Seismic Network ◽  
Fault System ◽  
Fault Plane Solutions ◽  
Stress Regime ◽  
Focal Mechanism Solutions ◽  
Earthquake Focal Mechanism

Abstract. Improving the knowledge of seismogenic faults requires the integration of geological, seismological, and geophysical information. Among several analyses, the definition of earthquake focal mechanisms plays an essential role in providing information about the geometry of individual faults and the stress regime acting in a region. Fault plane solutions can be retrieved by several techniques operating in specific magnitude ranges, both in the time and frequency domain and using different data. For earthquakes of low magnitude, the limited number of available data and their uncertainties can compromise the stability of fault plane solutions. In this work, we propose a useful methodology to evaluate how well a seismic network, used to monitor natural and/or induced micro-seismicity, estimates focal mechanisms as a function of magnitude, location, and kinematics of seismic source and consequently their reliability in defining seismotectonic models. To study the consistency of focal mechanism solutions, we use a Bayesian approach that jointly inverts the P/S long-period spectral-level ratios and the P polarities to infer the fault plane solutions. We applied this methodology, by computing synthetic data, to the local seismic network operating in the Campania–Lucania Apennines (southern Italy) aimed to monitor the complex normal fault system activated during the Ms 6.9, 1980 earthquake. We demonstrate that the method we propose is effective and can be adapted for other case studies with a double purpose. It can be a valid tool to design or to test the performance of local seismic networks, and more generally it can be used to assign an absolute uncertainty to focal mechanism solutions fundamental for seismotectonic studies.

scholarly journals Fault-plane solutions from moment-tensor inversion and preliminary Coulomb stress analysis for the Emilia Plain

2012 ◽  
Vol 55 (4) ◽  
Author(s):  
Angela Saraò ◽  
Laura Peruzza
Keyword(s):  
Elastic Stress ◽  
Fault Plane ◽  
Moment Tensor ◽  
Focal Mechanisms ◽  
Structural System ◽  
Fault Plane Solutions ◽  
Stress Changes ◽  
Intermediate Distance ◽  
Complex Structural ◽  
Coulomb Stress Analysis

<p>We investigate the seismicity occurred in the Po area, in the period July 2011-June 1012, by means of moment tensor and we use our set of revised focal mechanisms - computed for M&gt; 3.7 earthquakes - to evaluate Coulomb elastic stress changes in order to detect potential intermediate-distance faults interaction, and the main features of this complex structural system.</p>

Reanalysis of the 1963 Baffin Island Earthquake (MS 6.2) and its Seismotectonic Environment

1990 ◽  
Vol 61 (3-4) ◽  
pp. 181-192 ◽  
Author(s):  
Henry S. Hasegawa ◽  
John Adams
Keyword(s):  
Fault Plane ◽  
Normal Fault ◽  
In Situ Stress ◽  
Baffin Island ◽  
Normal Faulting ◽  
Fault Plane Solutions ◽  
Transient Phenomena ◽  
Tension Axis ◽  
Plane Solution

Abstract The 1963 Baffin Island earthquake of MS 6.2 is reanalyzed to determine whether or not it involved normal faulting, as previously suggested. The revised fault-plane solution has nodal planes with strike 113°, dip 66°, rake 235° and strike 352°, dip 41°, rake 322°. The T-axis trends 227° and plunges 14°, and the P-axis trends 338° and plunges 55°. Thus though this solution confirms normal faulting, it suggests a larger strike-slip component than most previous studies. The tension axis is oriented SW, which is normal to the NW geographic trend of Baffin Island. We consider that the normal-fault regime could be a transient phenomena related to extensional stress in the glacial forebulge presently centered over northeast Baffin Island, and is associated with incomplete postglacial rebound. However, future geophysical measurements such as heat flow, in-situ stress and vertical uplift rate, as well as more fault-plane solutions are required to test this hypothesis.

Relocation of Koyna earthquakes

1980 ◽  
Vol 70 (5) ◽  
pp. 1849-1868
Author(s):  
B. K. Rastogi ◽  
P. Talwani
Keyword(s):  
Fault Plane ◽  
Seismic Velocity ◽  
Landsat Imagery ◽  
Velocity Model ◽  
Strike Slip ◽  
Normal Faulting ◽  
Large Area ◽  
Fault Plane Solutions ◽  
Lateral Strike Slip ◽  
Induced Earthquake

abstract The Koyna earthquake of December 10, 1967 was the most damaging reservoir-induced earthquake. It was followed by a long sequence of earthquakes which is still continuing. Precise locations of the Koyna earthquakes have been very much disputed as different locations of the main earthquake and stronger aftershocks were obtained by various workers. Over 1,500 epicenters of Koyna earthquakes through 1973 were obtained by Guha et al. (1974). They cover a large area in a diffused pattern. In view of the continuing seismicity and a recently obtained seismic velocity model, the larger events (ML ≧ 4.0) and about 300 selected smaller events (ML &lt; 4.0) were relocated. The relocated epicenters show some concentration and suggest the possibility of two trends in the NNE and NW directions. There is a NNE trend of epicenters near the dam and another about 20 km west of the reservoir. The NW trend cuts through these NNE trends. The events were grouped to obtain their composite fault-plane solutions which indicate left-lateral strike-slip faulting along the NNE faults and normal faulting in the NW direction. Faults observed in the LANDSAT imagery match with these trends.

scholarly journals Focal Mechanisms of Mw 6.3 Aftershocks from Waveform Inversions, Phayao Fault Zone, Northern Thailand

2017 ◽  
Vol 2017 ◽  
pp. 1-7 ◽  
Author(s):  
Kasemsak Saetang
Keyword(s):  
Fault Zone ◽  
Moment Tensor ◽  
Waveform Inversion ◽  
Focal Mechanisms ◽  
Frequency Noise ◽  
Source Inversion ◽  
Fault Plane Solutions ◽  
Northern Thailand ◽  
Moment Tensors ◽  
Grid Search Method

The focal mechanisms of Mw 6.3 aftershocks, Chiang Rai Province, Northern Thailand, were determined by using a multistation waveform inversion. Three aftershocks were selected and their waveforms were inverted for moment tensor calculation. Waveform inversions were derived from three broadband stations with three components and epicentral distances less than 250 km after all seismic stations were considered. The deviatoric moment tensor inversion was used for focal mechanism calculations. Band-pass filtering in the range of 0.03–0.15 Hz was selected for reducing low- and high-frequency noise. Source positions were created by using a single-source inversion and a grid-search method computed to optimize the waveform match. The results showed stable moment tensors and fault geometries with the southwest azimuth in the northern part of the Payao Fault Zone (PFZ) with depths shallower than 10 km. Left-lateral strike-slip with a reverse component was detected. The tectonics of the PFZ is constrained by fault-plane solutions of earthquakes. WSW directional strikes are observed in the northern part of the PFZ.

scholarly journals Seismotectonic characteristics of the area of Western Attica derived from the study of the September 7, 1999 Athens earthquake aftershock sequence

2001 ◽  
Vol 34 (4) ◽  
pp. 1645 ◽  
Author(s):  
N. VOULGARIS ◽  
M. PIRLI ◽  
P. PAPADIMITRIOU ◽  
J. KASSARAS ◽  
K. MAKROPOULOS
Keyword(s):  
Stress Field ◽  
Detailed Analysis ◽  
Fault Plane ◽  
Local Stress ◽  
Aftershock Sequence ◽  
Normal Faulting ◽  
Fault Plane Solutions ◽  
Tectonic Regime ◽  
Athens Earthquake ◽  
Local Stress Field

A detailed analysis of the aftershock sequence of the September 7, 1999 Athens earthquake was performed in order to define the fault planes activated during this sequence and study the tectonic regime of the area. Calculated fault plane solutions were verified by the composite solutions and the application of the principal parameters method. The combined results indicate a uniform tectonic status in the western part of the aftershock area, with normal faulting of WNW-ESE trend and an average dip of 60Ί and a more complex one in the eastern part, where the azimuths of the activated fault planes vary and a transverse antithetic fault is also active. This variation could possibly imply a variation of the local stress field.

Sign in / Sign up

Export Citation Format

Share Document