NUMERICAL SIMULATION OF THE PROCESS OF GEOTHERMAL LOW-POTENTIAL GROUND ENERGY EXTRACTION

2016 ◽  
Vol 3 (2) ◽  
pp. 0-0
Author(s):  
Александр Захаров ◽  
Aleksandr Zakharov ◽  
Андрей Пономарев ◽  
Andrey Ponomarev
Keyword(s):  
Numerical Simulation ◽  
Temperature Distribution ◽  
Thermal Energy ◽  
Simulation Software ◽  
Soil Conditions ◽  
Geometrical Parameters ◽  
Power Bases ◽  
Energy Foundations ◽  
The City ◽  
Ground Mass

The aim of our research is to study the interaction of energy foundations with the ground mass and to develop methods for their construction on the example of the city of Perm. Field studies of ground were carried out in a specially chosen pilot site to determine temperature distribution in the ground mass, change of ground-water level and physical-mechanical and thermal-physical characteristics of the ground mass. The diagrams of depth temperature distribution in the ground and its seasonal variations were obtained on the results of monitoring, and also the average groundwater level. To carry out numerical simulation, software-complex “GeoStudio” was selected. Its basic differential equation is the fundamental heat conduction equation with an internal heat source. The purpose of the numerical simulation was quantitative evaluation of the thermal energy extracted from different energy foundations under soil conditions in the city of Perm. By results of the spent numerical experiments the equations of regress and nomographs dependences of size of received thermal energy on geometrical parameters of the projected power bases to hydro-geological and climatic conditions of the Perm region are constructed

scholarly journals Prediction of Convective Heat Transfer Coefficient and Temperature Distribution of Air-Conditioned Spaces Using Numerical Simulation

2016 ◽  
Vol 10 (8) ◽  
pp. 12
Author(s):  
Hussein J. Akeiber ◽  
Mazlan A. Wahid ◽  
Hasanen M. Hussen ◽  
Abdulrahman Th. Mohammad ◽  
Bashar Mudhaffar Abdullah ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Transfer Coefficient ◽  
Temperature Distribution ◽  
Transfer Coefficient ◽  
Convective Heat Transfer ◽  
Convective Heat ◽  
Convective Heat Transfer Coefficient ◽  
Solution Technique ◽  
Geometrical Parameters

Accurate and efficient modeling of convective heat transfer coefficient (CHTC) by considering the detailed room geometry and heat flux density in building is demanding for economy, environmental amiability, and user satisfaction. We report the three-dimensional finite-volume numerical simulation of internal room flow field characteristics with heated walls. Two different room geometries are chosen to determine the CHTC and temperature distribution. The conservation equations (elliptic partial differential) for the incompressible fluid flows are numerically solved using iterative method with no-slip boundary conditions to compute velocity components, pressure, temperature, turbulent kinetic energy, and dissipation rate. A line-by-line solution technique combined with a tri-diagonal matrix algorithm (TDMA) is used. The temperature field is simulated for various combinations of air-change per hour and geometrical parameters. The values of HTCs are found to enhance with increasing wall temperatures.

Tumor Geometry and SAR Distribution Generated From MicroCT Images for Tumor Temperature Elevation Simulation in Magnetic Nanoparticle Hyperthermia

2013 ◽  
Author(s):  
Alexander LeBrun ◽  
Navid Manuchehrabadi ◽  
Anilchandra Attaluri ◽  
Ronghui Ma ◽  
Liang Zhu
Keyword(s):  
Numerical Simulation ◽  
Magnetic Nanoparticles ◽  
Temperature Distribution ◽  
Magnetic Nanoparticle ◽  
Heat Transfer Process ◽  
Simulation Software ◽  
Temperature Elevation ◽  
Hyperthermia Treatment ◽  
Software Packages ◽  
Magnetic Nanoparticle Hyperthermia

Previous investigations in magnetic nanoparticle hyperthermia for cancer treatments have demonstrated that particle size, particle coating, and magnetic field strength and frequency determine its heating generation capacity. However, once the nanoparticles are manufactured, the spatial distribution of the nanostructures dispersed in tissue dominates the spatial temperature elevation during heating. 1–3 Therefore, understanding the distribution of magnetic nanoparticles in tumors is critical to develop theoretical models to predict temperature distribution in tumors during hyperthermia treatment. An accurate description of the nanoparticle distribution and the tumor geometry will greatly enhance the simulation accuracy of the heat transfer process in tumors, which is crucial for generating an optimal temperature distribution that can prevent the occurrence of heating under-dosage in the tumor and overheating in the healthy tissue. Recently studies by our group have demonstrated that the nanoparticle concentration distribution in tumors can be visualized via microCT image due to the density elevation of the presence of magnetic nanoparticles. 4 The problem is the intensive memory requirements to directly import the microCT images to numerical simulation software packages such as COMSOL. Although commercial software packages exist to handle detailed entities inside tumors, they are very expensive to purchase. In addition, having very small entities at the micrometer level inside the tumor geometry may provide challenge to numerical simulation software to accept the generated geometry.

The Simulation Study on Heat Dissipation of High Power LED Based on the Natural Convection

2013 ◽  
Vol 475-476 ◽  
pp. 1454-1458
Author(s):  
Yong Zhong ◽  
Ting Yong Fang ◽  
Tao Lin Zhang
Keyword(s):  
Numerical Simulation ◽  
Temperature Distribution ◽  
High Power ◽  
Heat Dissipation ◽  
Simulation Software ◽  
Air Flow Rate ◽  
Simulation Research ◽  
Eddy Simulation ◽  
Large Eddy ◽  
High Power Led

In this paper, we studied on the heat dissipation of high power LED in numerical simulation by the large eddy simulation numerical methods with the simulation software FDS, and studied the temperature distribution and heat pipe cooling respectively, etc.. We did the numerical simulation research on the heat dissipation of high power LED fin by numerical simulation, and obtained the numerical solution of all the LED temperature field and flow field. The air flow rate near the radiating surface was low; the fin surface temperature distribution was basic uniform and closed to the temperature of the constant heat reservoir. The analysis of the results of numerical simulation provided references for the improvement of optimal design of LED radiator.

Numerical Simulation of Filling and Solidification in Sand Casting by Procast

2013 ◽  
Vol 791-793 ◽  
pp. 550-553 ◽  
Author(s):  
Dong Dong Han ◽  
Cheng Jun Wang ◽  
Juan Chang ◽  
Lei Chen ◽  
Huai Bei Xie
Keyword(s):  
Numerical Simulation ◽  
Heat Dissipation ◽  
Solidification Process ◽  
Simulation Software ◽  
Sand Casting ◽  
Production Costs ◽  
Raw Material ◽  
Casting Defects ◽  
Three Dimension ◽  
Filling And Solidification

At present, pulley produced in China has been able to meet the demand of domestic and international markets. But there are many problem of the pulley industry in our country, such as too many production enterprises and the low level of export products. And as components of drive system are light weight and raw material price of pulley casting are rising, manufacturing requirements of the pulley are also more and more high. Aiming at the casting defects of pulley that enterprise current product, pulley casting blank model of common material HT250 be made by three-dimension software, numerical simulation of filling and solidification process for pulley sand casting by the casting simulation software Procast, the size and location of the various casting defects were forecasted and analyzed, reflecting the pulley filling and solidification process of the actual situation, due to the thicker pulley rim and less heat dissipation, position of shrinkage is close to the middle of rim [, a method of eliminating defects is proposed to realize sequential solidification, and thus to minimize porosity shrinkage and improve casting performance and reduce casting time and reduce production costs.

Case Study on Modeling Fire Action Complexity in Fire Safety Engineering of Structures

2017 ◽  
Vol 21 ◽  
pp. 102-107
Author(s):  
Constantin Sorin Scutarasu ◽  
Dan Diaconu-Şotropa ◽  
Marinela Barbuta
Keyword(s):  
Numerical Simulation ◽  
Fire Safety ◽  
Simulation Software ◽  
Dynamics Simulation ◽  
Structural Safety ◽  
Modular Organization ◽  
Field Of Study ◽  
Safety Design ◽  
Fire Safety Design ◽  
Technical Regulations

Important goals in the fire safety design, such as preventing loss of life and goods damage, are achieved by maintaining the stability of structures exposed to fire for a period of time established by norms and standards. Real fire scenarios confirm that the specific technical regulations which actually have a prescriptive character (both national and international) do not deal with sufficient possibilities regarding the assessment of structural fire safety. The new approach on structural safety, based on engineering notions, gives us additional prospects on it and it is included in the issues of the fire safety design of structures. A relatively new field of study, known by a few professionals focused on fire safety (but well acknowledged in the research area), fire safety design met with lots of changes and restructuring of the governing concepts and procedures and of the information with which they operate, due to the fast accumulation of experience in this area of engineering activity. Consequently, after countries such as Australia, Canada, New Zeeland or USA provided towards professionals specific technical regulations for fire safety design, groups of experts in these aforementioned countries have joined their forces to try to diminish the differences that exists between those regulations and to give a unitary character to them, a better conceptualized engineering approach of the fire safety design. The result: occurrence of the publication International Fire Engineering Guidelines (last edition from 2005). The systematic approach of fire safety design in constructions pointed, once again, the possibility of modular organization of this field of study, the relations between modules being established according to the objective or objectives in the fire safety design for a specified building. This article aims to put forward, from this modularized perspective, the study of the fire safety design of a building exposed to fire; hence, the practical part of the article exhibits the numerical simulation of initialization and development of the fire process for a large scale religious building. The main features of the building represent the amount of space that facilitates the spreading of smoke and warm gases and which increases the risk of damaging the structural reinforced concrete elements. Application calls to specific numerical simulation with a higher degree of credibility, such as those realized by the FDS (Fire Dynamics Simulation) software.

Experimental and Numerical Evaluation of Small-Scale Cryosurgery Using Ultrafine Cryoprobe

2013 ◽  
Vol 4 (4) ◽  
Author(s):  
Junnosuke Okajima ◽  
Atsuki Komiya ◽  
Shigenao Maruyama
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Heat Transfer Coefficient ◽  
Temperature Distribution ◽  
Surface Temperature ◽  
Numerical Evaluation ◽  
Small Scale ◽  
Outer Diameter ◽  
Cooling Performance ◽  
The Heat Transfer Coefficient

The objective of this work is to experimentally and numerically evaluate small-scale cryosurgery using an ultrafine cryoprobe. The outer diameter (OD) of the cryoprobe was 550 μm. The cooling performance of the cryoprobe was tested with a freezing experiment using hydrogel at 37 °C. As a result of 1 min of cooling, the surface temperature of the cryoprobe reached −35 °C and the radius of the frozen region was 2 mm. To evaluate the temperature distribution, a numerical simulation was conducted. The temperature distribution in the frozen region and the heat transfer coefficient was discussed.

Wrinkling Prediction and Optimization of Sheet Metal Forming Process by Numerical Simulation

2015 ◽  
Vol 818 ◽  
pp. 252-255 ◽  
Author(s):  
Ján Slota ◽  
Marek Šiser
Keyword(s):  
Numerical Simulation ◽  
Material Model ◽  
Mechanical Tests ◽  
Simulation Software ◽  
Forming Process ◽  
Part Geometry ◽  
Nominal Thickness ◽  
430 Stainless Steel ◽  
Metal Forming Process ◽  
Aisi 430

The paper deals with optimization of forming process for AISI 430 stainless steel with nominal thickness 0.4 mm. During forming of sidewall for washing machine drum, some wrinkles remain at the end of forming process in some places. This problem was solved by optimization the geometry of the drawpiece using numerical simulation. During optimization a series of modifications of the part geometry to absolute elimination of wrinkling was performed. On the basis of mechanical tests, the material model was created and imported into the material database of Autoform simulation software.

Based on Numerical Simulation of High-Performance Parallel Machine Muffler Experimental Calibration

2013 ◽  
Vol 718-720 ◽  
pp. 1645-1650
Author(s):  
Gen Yin Cheng ◽  
Sheng Chen Yu ◽  
Zhi Yong Wei ◽  
Shao Jie Chen ◽  
You Cheng
Keyword(s):  
Numerical Simulation ◽  
Finite Element ◽  
Boundary Element ◽  
Message Passing ◽  
High Performance ◽  
Message Passing Interface ◽  
Parallel Machine ◽  
Simulation Software ◽  
Experimental Calibration ◽  
The Cost

Commonly used commercial simulation software SYSNOISE and ANSYS is run on a single machine (can not directly run on parallel machine) when use the finite element and boundary element to simulate muffler effect, and it will take more than ten days, sometimes even twenty days to work out an exact solution as the large amount of numerical simulation. Use a high performance parallel machine which was built by 32 commercial computers and transform the finite element and boundary element simulation software into a program that can running under the MPI (message passing interface) parallel environment in order to reduce the cost of numerical simulation. The relevant data worked out from the simulation experiment demonstrate that the result effect of the numerical simulation is well. And the computing speed of the high performance parallel machine is 25 ~ 30 times a microcomputer.

Sign in / Sign up

Export Citation Format

Share Document