On the Mode of the Secondary Instability Excited on Low-Speed Streaks in a Turbulent Channel Flow.

2021 ◽  
Vol 2021.58 (0) ◽  
pp. G034
Author(s):  
Yuya TANADA ◽  
Katsumi TSUBOKO ◽  
Tomoya KIKUGAWA ◽  
Masaharu MATSUBARA
2004 ◽  
Author(s):  
Feng-Chen Li ◽  
Yasuo Kawaguchi ◽  
Takehiko Segawa ◽  
Koichi Hishida

In the present study, we employed stereoscopic particle image velocimetry (SPIV) to investigate the characteristics of turbulence structures in a drag-reduced turbulent channel flow with addition of surfactant. The tested drag-reducing fluid was a CTAC (cetyltrimethyl ammonium chloride)/NaSal/Water system maintained at 25°C, having a 30-ppm concentration of CTAC. SPIV measurement was performed for a water flow (Re=1.1×105) and a CTAC solution flow (RE=1.5×105 with 54% drag reduction) in both the streamwise-spanwise and wall-normal-spanwise planes, respectively. A series of wall-normal vortex cores were found to align with the low-speed streaks with opposite vorticity signals at both sides of the streaks and with the vorticity decreased averagely by about one order in CTAC solution flow compared with water flow; the spanwise spacing between the low-speed streaks in the solution flow is increased by about 42%. The streamwise vorticity of the vortex cores appearing in the wall-normal-spanwise plane was also decreased by the use of additives.


Author(s):  
Cristian Marchioli ◽  
Fabio Sbrizzai ◽  
Alfredo Soldati

Particle transfer in the wall region of turbulent boundary layers is dominated by the coherent structures which control the turbulence regeneration cycle. Coherent structures bring particles toward the wall and away from the wall and favour particle segregation in the viscous region giving rise to nonuniform particle distribution profiles which peak close to the wall. In this work, we focus on the transfer mechanism of different size particles and on the influence of gravity on particles deposition. By tracking O(105) particles in Direct Numerical Simulation (DNS) of a turbulent channel flow at Reτ = 150, we find that particles may reach the wall directly or may accumulate in the wall region, under the low-speed streaks. Even though low-speed streaks are ejection-like environments, particles are not re-entrained into the outer region. Particles segregated very near the wall by the trapping mechanisms we investigated in a previous work [1] are slowly driven to the wall. We find that gravity plays a role on particle distribution but, for small particles (τp+ < 3), the controlling transfer mechanism is related to near-wall turbulence structure.


2014 ◽  
Vol 749 ◽  
pp. 818-840 ◽  
Author(s):  
Jin Lee ◽  
Jae Hwa Lee ◽  
Jung-Il Choi ◽  
Hyung Jin Sung

AbstractDirect numerical simulations were carried out to investigate the spatial features of large- and very-large-scale motions (LSMs and VLSMs) in a turbulent channel flow ($\def \xmlpi #1{}\def \mathsfbi #1{\boldsymbol {\mathsf {#1}}}\let \le =\leqslant \let \leq =\leqslant \let \ge =\geqslant \let \geq =\geqslant \def \Pr {\mathit {Pr}}\def \Fr {\mathit {Fr}}\def \Rey {\mathit {Re}}\mathit{Re}_{\tau }=930$). A streak detection method based on the streamwise velocity fluctuations was used to individually trace the cores of LSMs and VLSMs. We found that both the LSM and VLSM populations were large. Several of the wall-attached LSMs stretched toward the outer regions of the channel. The VLSMs consisted of inclined outer LSMs and near-wall streaks. The number of outer LSMs increased linearly with the streamwise length of the VLSMs. The temporal features of the low-speed streaks in the outer region revealed that growing and merging events dominated the large-scale (1–$3\delta $) structures. The VLSMs $({>}3\delta )$ were primarily created by merging events, and the statistical analysis of these events supported that the merging of large-scale upstream structures contributed to the formation of VLSMs. Because the local convection velocity is proportional to the streamwise velocity fluctuations, the streamwise-aligned structures of the positive- and negative-$u$ patches suggested a primary mechanism underlying the merging events. The alignment of the positive- and negative-$u$ structures may be an essential prerequisite for the formation of VLSMs.


Author(s):  
Xinliang Li ◽  
Katsumi Hashimoto ◽  
Mamoru Tanahashi ◽  
Toshio Miyauchi

Direct numerical simulation (DNS) of supercritical CO2 turbulent channel flow is performed to investigate the heat transfer mechanism of supercritical fluid. In the present DNS, full compressible Navier-Stokes equations and Peng-Robison state equation are solved. Due to effects of the mean density variation in the wall normal direction, mean velocity in the cooling region becomes high compared with that in the heating region. The mean width between high- and low-speed streaks near the wall decreases in the cooling region, which means that turbulence in the cooling region is enhanced and lots of fine scale eddies are created due to the local high Reynolds number effects. From the turbulent kinetic energy budget, it is found that compressibility effects related with pressure fluctuation and dilatation of velocity fluctuation can be ignored even for supercritical condition. However, the effect of density fluctuation on turbulent kinetic energy cannot be ignored. In the cooling region, low kinematic viscosity and high thermal conductivity in the low speed streaks modify fine scale structure and turbulent transport of temperature, which results in high Nusselt number in the cooling condition of the supercritical CO2.


1997 ◽  
Vol 332 ◽  
pp. 185-214 ◽  
Author(s):  
J. Jeong ◽  
F. Hussain ◽  
W. Schoppa ◽  
J. Kim

Coherent structures (CS) near the wall (i.e.y+ ≤ 60) in a numerically simulated turbulent channel flow are educed using a conditional sampling scheme which extracts the entire extent of dominant vortical structures. Such structures are detected from the instantaneous flow field using our newly developed vortex definition (Jeong & Hussain 1995) - a region of negativeλ2, the second largest eigenvalue of the tensorSikSkj+ ΩikΩkj- which accurately captures the structure details (unlike velocity-, vorticity- or pressure-based eduction). Extensive testing has shown thatλ2correctly captures vortical structures, even in the presence of the strong shear occurring near the wall of a boundary layer. We have shown that the dominant near-wall educed (i.e. ensemble averaged after proper alignment) CS are highly elongated quasi-streamwise vortices; the CS are inclined 9° in the vertical (x, y)-plane and tilted ±4° in the horizontal (x, z)-plane. The vortices of alternating sign overlap inxas a staggered array; there is no indication near the wall of hairpin vortices, not only in the educed data but also in instantaneous fields. Our model of the CS array reproduces nearly all experimentally observed events reported in the literature, such as VITA, Reynolds stress distribution, wall pressure variation, elongated low-speed streaks, spanwise shear, etc. In particular, a phase difference (in space) between streamwise and normal velocity fluctuations created by CS advection causes Q4 ('sweep’) events to dominate Q2 ('ejection’) and also creates counter-gradient Reynolds stresses (such as Ql and Q3 events) above and below the CS. We also show that these effects are adequately modelled by half of a Batchelor's dipole embedded in (and decoupled from) a background shearU(y). The CS tilting (in the (x, z)-plane) is found to be responsible for sustaining CS through redistribution of streamwise turbulent kinetic energy to normal and spanwise components via coherent pressure-strain effects.


2018 ◽  
Vol 32 (12n13) ◽  
pp. 1840004 ◽  
Author(s):  
Weidan Ni ◽  
Lipeng Lu ◽  
Jian Fang ◽  
Charles Moulinec ◽  
Yufeng Yao

The effect of spanwise alternatively distributed strips (SADS) control on turbulent flow in a plane channel has been studied by direct numerical simulations to investigate the characteristics of large-scale streamwise vortices (LSSVs) induced by small-scale active wall actuation, and their potential in suppressing flow separation. SADS control is realized by alternatively arranging out-of-phase control (OPC) and in-phase control (IPC) wall actuations on the lower channel wall surface, in the spanwise direction. It is found that the coherent structures are suppressed or enhanced alternatively by OPC or IPC, respectively, leading to the formation of a vertical shear layer, which is responsible for the LSSVs’ presence. Large-scale low-speed region can also be observed above the OPC strips, which resemble large-scale low-speed streaks. LSSVs are found to be in a statistically-converged steady state and their cores are located between two neighboring OPC and IPC strips. Their motions contribute significantly to the momentum transport in the wall-normal and spanwise directions, demonstrating their potential ability to suppress flow separation.


Sign in / Sign up

Export Citation Format

Share Document