Visualization of Tribological Phenomena on Brake Pad Materials by High-speed In Situ Observation and Acoustic Emission Measurement Method

Author(s):  
Alan HASE ◽  
Kazuho MIZUTA ◽  
Yukio NISHIZAWA ◽  
Koji SUGIMOTO ◽  
Katsuya OKAYAMA
2014 ◽  
Vol 55 (10) ◽  
pp. 1553-1556 ◽  
Author(s):  
Takashi Tsuchiya ◽  
Kaita Ito ◽  
Shogo Miyoshi ◽  
Manabu Enoki ◽  
Shu Yamaguchi

2014 ◽  
Vol 782 ◽  
pp. 3-7
Author(s):  
Kenji Shinozaki ◽  
Motomichi Yamamoto ◽  
Kohta Kadoi ◽  
Peng Wen

Solidification cracking during welding is very serious problem for practical use. Therefore, there are so many reports concerning solidification cracking. Normally, solidification cracking susceptibility of material is quantitatively evaluated using Trans-Varestraint test. On the other hand, local solidification cracking strain was tried to measure precisely using in-situ observation method, called MISO method about 30 years ago. Recently, digital high-speed video camera develops very fast and its image quality is very high. Therefore, we have started to observe solidification crack using in site observation method. In this paper, the local critical strain of a solidification crack was measured and the high temperature ductility curves of weld metals having different dilution ratios and different grain sizes to evaluate quantitatively the effects of dilution ratio and grain size on solidification cracking susceptibility by using an improved in situ observation method.


2021 ◽  
Vol 111 (07-08) ◽  
pp. 495-500
Author(s):  
Eckart Uhlmann ◽  
Tobias Holznagel ◽  
Sebastian Ospina Mora

Herausforderungen bei der spanenden Bearbeitung von CFK sind unerwünschte Materialschädigungen im Bauteil sowie hohe Werkzeugverschleißraten. Für diese Arbeit wurden zerstörende Analogversuche an CFK und diamantbeschichteten Hartmetallproben durchgeführt und die Körperschallmesssignale analysiert. Die eingehende Untersuchung der Messwerte aus den Analogversuchen kann zu einer datengetriebenen Parametrierung einer körperschallbasierten Prozessüberwachung für die Fräsbearbeitung von CFK beitragen.   Challenges in machining CFRP are unwanted material damage in the component and high tool wear rates. For this work, destructive analogy experiments were carried out on CFRP and diamond-coated milling tools while analyzing the acoustic emission measurement signals. The detailed examination of the measured values from the analogy experiment can contribute to a data-driven parameterization of an acoustic emission-based process monitoring for the milling of CFRP.


2009 ◽  
Vol 34 (19) ◽  
pp. 2942 ◽  
Author(s):  
Hiroshi Tsuda ◽  
Eiichi Sato ◽  
Tomio Nakajima ◽  
Hideyuki Nakamura ◽  
Takahiro Arakawa ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document