1P1-H05 A development of remote driving system and its evaluation with respect to accelerations information(VR and Interface)

2011 ◽  
Vol 2011 (0) ◽  
pp. _1P1-H05_1-_1P1-H05_4
Author(s):  
Hideya MATSUNAGA ◽  
Hidetoshi NAKASHIMA ◽  
Masanobu NAGATA
Author(s):  
Rajesh Kumar Gupta ◽  
L. N. Padhy ◽  
Sanjay Kumar Padhi

Traffic congestion on road networks is one of the most significant problems that is faced in almost all urban areas. Driving under traffic congestion compels frequent idling, acceleration, and braking, which increase energy consumption and wear and tear on vehicles. By efficiently maneuvering vehicles, traffic flow can be improved. An Adaptive Cruise Control (ACC) system in a car automatically detects its leading vehicle and adjusts the headway by using both the throttle and the brake. Conventional ACC systems are not suitable in congested traffic conditions due to their response delay.  For this purpose, development of smart technologies that contribute to improved traffic flow, throughput and safety is needed. In today’s traffic, to achieve the safe inter-vehicle distance, improve safety, avoid congestion and the limited human perception of traffic conditions and human reaction characteristics constrains should be analyzed. In addition, erroneous human driving conditions may generate shockwaves in addition which causes traffic flow instabilities. In this paper to achieve inter-vehicle distance and improved throughput, we consider Cooperative Adaptive Cruise Control (CACC) system. CACC is then implemented in Smart Driving System. For better Performance, wireless communication is used to exchange Information of individual vehicle. By introducing vehicle to vehicle (V2V) communication and vehicle to roadside infrastructure (V2R) communications, the vehicle gets information not only from its previous and following vehicle but also from the vehicles in front of the previous Vehicle and following vehicle. This enables a vehicle to follow its predecessor at a closer distance under tighter control.


2013 ◽  
Vol 38 (4) ◽  
pp. 441-445 ◽  
Author(s):  
Chang-sheng XIE ◽  
Pin JIANG ◽  
Wen-wu HU ◽  
Ya-hui LUO ◽  
Yan-li TONG

Author(s):  
Wulf Loh ◽  
Janina Loh

In this chapter, we give a brief overview of the traditional notion of responsibility and introduce a concept of distributed responsibility within a responsibility network of engineers, driver, and autonomous driving system. In order to evaluate this concept, we explore the notion of man–machine hybrid systems with regard to self-driving cars and conclude that the unit comprising the car and the operator/driver consists of such a hybrid system that can assume a shared responsibility different from the responsibility of other actors in the responsibility network. Discussing certain moral dilemma situations that are structured much like trolley cases, we deduce that as long as there is something like a driver in autonomous cars as part of the hybrid system, she will have to bear the responsibility for making the morally relevant decisions that are not covered by traffic rules.


Author(s):  
Mhafuzul Islam ◽  
Mashrur Chowdhury ◽  
Hongda Li ◽  
Hongxin Hu

Vision-based navigation of autonomous vehicles primarily depends on the deep neural network (DNN) based systems in which the controller obtains input from sensors/detectors, such as cameras, and produces a vehicle control output, such as a steering wheel angle to navigate the vehicle safely in a roadway traffic environment. Typically, these DNN-based systems in the autonomous vehicle are trained through supervised learning; however, recent studies show that a trained DNN-based system can be compromised by perturbation or adverse inputs. Similarly, this perturbation can be introduced into the DNN-based systems of autonomous vehicles by unexpected roadway hazards, such as debris or roadblocks. In this study, we first introduce a hazardous roadway environment that can compromise the DNN-based navigational system of an autonomous vehicle, and produce an incorrect steering wheel angle, which could cause crashes resulting in fatality or injury. Then, we develop a DNN-based autonomous vehicle driving system using object detection and semantic segmentation to mitigate the adverse effect of this type of hazard, which helps the autonomous vehicle to navigate safely around such hazards. We find that our developed DNN-based autonomous vehicle driving system, including hazardous object detection and semantic segmentation, improves the navigational ability of an autonomous vehicle to avoid a potential hazard by 21% compared with the traditional DNN-based autonomous vehicle driving system.


2021 ◽  
Vol 1802 (2) ◽  
pp. 022021
Author(s):  
Zhengkang Zhou ◽  
Zhuoer Wang ◽  
Lan Wei
Keyword(s):  

Materials ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1691 ◽  
Author(s):  
Zhenzhen Chen ◽  
Donghui Wen ◽  
Jianfei Lu ◽  
Jie Yang ◽  
Huan Qi

For the traditional single-side planetary abrasive lapping process particle trajectories passing over the target surface are found to be periodically superposed due to the rational rotation speed ratio of the lapping plate to workpiece that could affect the material removal uniformity and hence its surface quality. This paper reports on a novel driving system design with combination of the tapered roller and contact roller to realize the irrational rotation speed ratio of the lapping plate to workpiece in the single-side planetary abrasive lapping process for the improvement of surface quality. Both of the numerical and experimental investigations have been conducted to evaluate the abrasive lapping performance of the novel driving system. It has been found from the numerical simulation that particle trajectories would theoretically cover the whole target surface if the lapping time is long enough due to their non-periodic characteristics, which can guarantee the uniformity of material removal from the surface of workpiece with relatively high surface quality. The encouraging experimental results underline the potential of the novel driving system design in the application of the single-side planetary abrasive lapping for the improvement of the surface quality in terms of surface roughness and material removal uniformity.


Sign in / Sign up

Export Citation Format

Share Document