3A1-L04 Selective and Low-Invasive Cell Injection of the Fluorescence Sensor Encapsulated in the Artificial Biomembrane Using Optical Control of Zeta Potential(Nano/Micro Manipulation System)

Retention of cationic dispersed rosin size was studied via turbidity measurements on stock filtrate with different alum and dispersed rosin size dosages. Stock charge characteristics were analyzed using both an analysis of charge demand determined via a streaming current detector and an evaluation of zeta potential of the fibers by streaming potential measurement. The results indicated that an optimum amount of alum existed such that good sizing retention was maintained throughout a wide range of dispersed rosin size dosages. However, when an excessive amount of alum was used and fines and colloidal particles were transitioned from anionic to cationic, the cationic size retention was reduced. Laboratory results were confirmed with a paper machine trial. All data suggested that a stock charge study was necessary to identify optimal alum dosage for a cationic dispersed rosin sizing program.

Download Full-text

An Experimental Investigation on Thermal Conductivity and Viscosity of Graphene doped CNTs /TiO2 Nanofluid

International Journal of Automotive and Mechanical Engineering ◽

10.15282/ijame.17.3.2020.16.0620 ◽

2020 ◽

Vol 17 (3) ◽

Author(s):

A.M. Zetty Akhtar ◽

M.M. Rahman ◽

K. Kadirgama ◽

M.A. Maleque

Keyword(s):

Thermal Conductivity ◽

Zeta Potential ◽

Base Fluid ◽

Minimum Quantity Lubrication ◽

Cutting Fluid ◽

Cutting Zone ◽

Observation Method ◽

The Stability ◽

The Relationship ◽

Zeta Potential Analysis

This paper presents the findings of the stability, thermal conductivity and viscosity of CNTs (doped with 10 wt% graphene)- TiO2 hybrid nanofluids under various concentrations. While the usage of cutting fluid in machining operation is necessary for removing the heat generated at the cutting zone, the excessive use of it could lead to environmental and health issue to the operators. Therefore, the minimum quantity lubrication (MQL) to replace the conventional flooding was introduced. The MQL method minimises the usage of cutting fluid as a step to achieve a cleaner environment and sustainable machining. However, the low thermal conductivity of the base fluid in the MQL system caused the insufficient removal of heat generated in the cutting zone. Addition of nanoparticles to the base fluid was then introduced to enhance the performance of cutting fluids. The ethylene glycol used as the base fluid, titanium dioxide (TiO2) and carbon nanotubes (CNTs) nanoparticle mixed to produce nanofluids with concentrations of 0.02 to 0.1 wt.% with an interval of 0.02 wt%. The mixing ratio of TiO2: CNTs was 90:10 and ratio of SDBS (surfactant): CNTs was 10:1. The stability of nanofluid checked using observation method and zeta potential analysis. The thermal conductivity and viscosity of suspension were measured at a temperature range between 30˚C to 70˚C (with increment of 10˚C) to determine the relationship between concentration and temperature on nanofluid’s thermal physical properties. Based on the results obtained, zeta potential value for nanofluid range from -50 to -70 mV indicates a good stability of the suspension. Thermal conductivity of nanofluid increases as an increase of temperature and enhancement ratio is within the range of 1.51 to 4.53 compared to the base fluid. Meanwhile, the viscosity of nanofluid shows decrements with an increase of the temperature remarks significant advantage in pumping power. The developed nanofluid in this study found to be stable with enhanced thermal conductivity and decrease in viscosity, which at once make it possible to be use as nanolubricant in machining operation.

Download Full-text

On-site optical control for solar mirrors

Future Energy, Environment and Materials ◽

10.2495/feem130411 ◽

2014 ◽

Author(s):

D. Fontani ◽

P. Sansoni ◽

S. Coraggia ◽

L. Mercatelli ◽

D. Jafrancesco ◽

...

Keyword(s):

Optical Control

Download Full-text

Incorporation of micro/nanoparticles of PCL with essential oil of Cymbopogon nardus in bacterial cellulose

International Journal of Advances in Medical Biotechnology - IJAMB ◽

10.25061/2595-3931/ijamb/2018.v1i2.18 ◽

2018 ◽

Vol 1 (2) ◽

pp. 37

Author(s):

Aline Krindges ◽

Vanusca Dalosto Jahno ◽

Fernando Morisso

Keyword(s):

Particle Size ◽

Particulate Matter ◽

Essential Oil ◽

Zeta Potential ◽

Bacterial Cellulose ◽

Culture Medium ◽

Static Culture ◽

Cymbopogon Nardus ◽

Cellulose Membranes

Incorporation studies of particles in different substrates with herbal assets growing. The objective of this work was the preparation and characterization of micro/nanoparticles containing cymbopogon nardus essential oil; and the incorporation of them on bacterial cellulose. For the development of the membranes was used the static culture medium and for the preparation of micro/nanoparticles was used the nanoprecipitation methodology. The incorporation of micro/nanoparticles was performed on samples of bacterial cellulose in wet and dry form. For the characterization of micro/nanoparticles were carried out analysis of SEM, zeta potential and particle size. For the verification of the incorporation of particulate matter in cellulose, analyses were conducted of SEM and FTIR. The results showed that it is possible the production and incorporation of micro/nanoparticles containing essential oil in bacterial cellulose membranes in wet form with ethanol.

Download Full-text

Biocompatibility of Silver Nano Bio-conjugates from Vitis vinifera Seeds and its Major Component Resveratrol

International Journal of Drug Delivery Technology ◽

10.25258/ijddt.v6i3.8896 ◽

2016 ◽

Vol 6 (3) ◽

Author(s):

R. Preethi ◽

P. Padma

Keyword(s):

Zeta Potential ◽

Vitis Vinifera ◽

Silver Ions ◽

Seed Extract ◽

Polydispersity Index ◽

Potential Range ◽

Visible Spectroscopy ◽

Grape Seeds ◽

X Ray ◽

Uv Visible

The study focused on the green synthesis of silver nanobioconjugates (AgNPs) from phenolic-rich fruit source, Vitis vinifera seed extract and its major component phenolic, resveratrol respectively. Sunlight exposure for 20 minutes was the method of choice for the synthesis of AgNPs of the extract as well as the phenolic, resveratrol. The synthesized nanobioconjugates were characterized using UV-Visible spectroscopy, Transmission electron microscopy (TEM), Energy dispersive X-ray analysis (EDAX), X-ray diffraction (XRD), Polydispersity index, Zeta potential and Fourier transform infrared spectroscopy (FTIR). The reduction of silver ions was confirmed by UV-visible spectroscopy with peaks at 440nm for both nanobioconjugates synthesized from seed extract and compound. The nanobioconjugates showed the spherical in shape with 14-35nm in size and crystalline in nature. The conjugates are well dispersed with 0.301 and 0.287 polydispersity index and the zeta potential range at -13.6 and -14.3mV for stability. The FTRI data proved that the components in grape seeds act as good reductants and stabilizers for the silver nanobioconjugate synthesis. All the synthesized nanobioconjugates exhibited steady and sustained release of the medicinal components conjugated, proving their druggability, and were biocompatible with human cells, demonstrating their safety. The findings of the study validate the anticancer properties of silver nanobioconjugates of Vitis vinifera and its active component resveratrol.

Download Full-text