scholarly journals In-plane Parametric Vibrations of Curved Bellows Subjected to Oscillating Internal Fluid Pressure Excitation

2004 ◽  
Vol 70 (696) ◽  
pp. 2286-2292
Author(s):  
Eiji TACHIBANA ◽  
Masahiro WATANABE ◽  
Nobuyuki KOBAYASHI ◽  
Kensuke HARA
Keyword(s):  
Fluid Pressure ◽  
Parametric Vibrations ◽  
Internal Fluid ◽  
Pressure Excitation

In-Plane Parametric Vibrations of Curved Bellows Subjected to Oscillating Internal Fluid Pressure Excitation

2004 ◽  
Author(s):  
Masahiro Watanabe ◽  
Eiji Tachibana ◽  
Nobuyuki Kobayashi
Keyword(s):  
Stability Analysis ◽  
Natural Frequencies ◽  
Parametric Instability ◽  
Fluid Pressure ◽  
Parametric Vibrations ◽  
Internal Fluid ◽  
Mathieu’S Equation ◽  
Stability Maps ◽  
Plane Direction ◽  
Pressure Excitation

This paper deals with the theoretical stability analysis of in-plane parametric vibrations of a curved bellows subjected to periodic internal fluid pressure excitation. The curved bellows studied in this paper are fixed at both ends rigidly, and are excited by the periodic internal fluid pressure. In the theoretical stability analysis, the governing equation of the curved bellows subjected to periodic internal fluid pressure excitation is derived as a Mathieu’s equation by using finite element method (FEM). Natural frequencies of the curved bellows are examined and stability maps are presented for in-plane parametric instability. It is found that the natural frequencies of the curved bellows decrease with increasing the static internal fluid pressure and buckling occurs due to high internal fluid pressure. It is also found that two types of parametric vibrations, longitudinal and transverse vibrations, occur to the curved bellows in-plane direction due to the periodic internal fluid pressure excitation. Moreover, effects of axis curvature on the parametric instability regions are examined theoretically.

In-plane Parametric Vibrations of Curved Bellows Subjected to Dynamic Internal Fluid Pressure Excitation

2003 ◽  
Vol 2003.7 (0) ◽  
pp. 289-290
Author(s):  
Eiji TACHIBANA ◽  
Masahiro WATANABE ◽  
Kensuke HARA ◽  
Nobuyuki KOBAYASHI
Keyword(s):  
Fluid Pressure ◽  
Parametric Vibrations ◽  
Internal Fluid ◽  
Pressure Excitation

Dynamic Stability of Flexible Bellows Subjected to Periodic Internal Fluid Pressure Excitation

2004 ◽  
Vol 126 (2) ◽  
pp. 188-193 ◽  
Author(s):  
Masahiro Watanabe ◽  
Nobuyuki Kobayashi ◽  
Yuichi Wada
Keyword(s):  
Stability Analysis ◽  
Natural Frequencies ◽  
Theoretical Calculations ◽  
Parametric Instability ◽  
Fluid Pressure ◽  
Internal Fluid ◽  
Mathieu’S Equation ◽  
Stability Maps ◽  
Instability Regions ◽  
Pressure Excitation

This paper deals with the theoretical stability analysis and experimental study of flexible bellows subjected to periodic internal fluid pressure excitation. The bellows studied in this paper are fixed at both ends rigidly, and are excited by the periodic internal fluid pressure. In the theoretical stability analysis, the basic equation of the bellows subjected to periodic internal fluid pressure excitation is derived as a Mathieu’s equation. Natural frequencies of the bellows are examined and stability maps are presented for parametric instability, computed by Bolotin’s method. It is found that the transverse natural frequencies of the bellows decrease with increasing the static internal fluid pressure and buckling occurs due to high internal fluid pressure. It is also found that primary and secondary parametric vibrations occur to the bellows in transverse direction due to the periodic internal fluid pressure excitation. Parametric instability regions are clarified and the theoretical calculations of the parametric instability boundaries are in good agreement with the experimental ones. Moreover, effects of damping and static internal fluid pressure on the parametric instability regions are examined theoretically.

scholarly journals Tactile Perception for Teleoperated Robotic Exploration within Granular Media

2021 ◽  
Vol 10 (4) ◽  
pp. 1-27
Author(s):  
Shengxin Jia ◽  
Veronica J. Santos
Keyword(s):  
Granular Media ◽  
Fluid Pressure ◽  
Tactile Sensor ◽  
Tactile Perception ◽  
Test Accuracy ◽  
Contact State ◽  
Buried Objects ◽  
Media Type ◽  
Additional Information ◽  
Internal Fluid

The sense of touch is essential for locating buried objects when vision-based approaches are limited. We present an approach for tactile perception when sensorized robot fingertips are used to directly interact with granular media particles in teleoperated systems. We evaluate the effects of linear and nonlinear classifier model architectures and three tactile sensor modalities (vibration, internal fluid pressure, fingerpad deformation) on the accuracy of estimates of fingertip contact state. We propose an architecture called the Sparse-Fusion Recurrent Neural Network (SF-RNN) in which sparse features are autonomously extracted prior to fusing multimodal tactile data in a fully connected RNN input layer. The multimodal SF-RNN model achieved 98.7% test accuracy and was robust to modest variations in granular media type and particle size, fingertip orientation, fingertip speed, and object location. Fingerpad deformation was the most informative modality for haptic exploration within granular media while vibration and internal fluid pressure provided additional information with appropriate signal processing. We introduce a real-time visualization of tactile percepts for remote exploration by constructing a belief map that combines probabilistic contact state estimates and fingertip location. The belief map visualizes the probability of an object being buried in the search region and could be used for planning.

Buckling of Risers in Tension due to Internal Pressure: Nonmovable Boundaries

1983 ◽  
Vol 105 (3) ◽  
pp. 277-281 ◽  
Author(s):  
M. M. Bernitsas ◽  
T. Kokkinis
Keyword(s):  
Internal Pressure ◽  
Fluid Pressure ◽  
Critical Length ◽  
Entire Length ◽  
Tubular Columns ◽  
Internal Fluid ◽  
Static Instability

Open-ended tubular columns may buckle globally as Euler columns due to the action of internal fluid pressure even while they are in tension along their entire length. Hydraulic columns, marine drilling and production risers are, therefore, prone to such static instability. This paper explains this phenomenon, defines the critical riser length for which this instability may occur and provides graphs with values of the critical length which can readily be used for design purposes. Risers with nonmovable boundaries are considered; namely, hinged-hinged, clamped-hinged, hinged-clamped and clamped-clamped risers.

scholarly journals Simulation of an Adaptive Fluid-Membrane Piezoelectric Lens

Micromachines ◽  
2019 ◽  
Vol 10 (12) ◽  
pp. 797
Author(s):  
Hitesh Gowda Bettaswamy Bettaswamy Gowda ◽  
Ulrike Wallrabe
Keyword(s):  
Thermal Expansion ◽  
Simulation Model ◽  
Fluid Pressure ◽  
Flexible Membrane ◽  
Membrane Deformation ◽  
Fluid Forces ◽  
Refractive Power ◽  
Element Simulation ◽  
Fluid Membrane ◽  
Internal Fluid

In this paper, we present a finite-element simulation of an adaptive piezoelectric fluid-membrane lens for which we modelled the fluid-structure interaction and resulting membrane deformation in COMSOL Multiphysics®. Our model shows the explicit coupling of the piezoelectric physics with the fluid dynamics physics to simulate the interaction between the piezoelectric and the fluid forces that contribute to the deformation of a flexible membrane in the adaptive lens. Furthermore, the simulation model is extended to describe the membrane deformation by additional fluid forces from the fluid thermal expansion. Subsequently, the simulation model is used to study the refractive power of the adaptive lens as a function of internal fluid pressure and analyze the effect of the fluid thermal expansion on the refractive power. Finally, the simulation results of the refractive power are compared to the experimental results at different actuation levels and temperatures validating the coupled COMSOL model very well. This is explicitly proven by explaining an observed positive drift of the refractive power at higher temperatures.

An Experimental Study on the Influence of Structural Damping on Internal Fluid Pressure During a Transient Flow

1990 ◽  
Vol 112 (3) ◽  
pp. 284-290 ◽  
Author(s):  
D. D. Budny ◽  
F. J. Hatfield ◽  
D. C. Wiggert
Keyword(s):  
Experimental Study ◽  
Transient Flow ◽  
Traditional Approach ◽  
Dynamic Pressure ◽  
Fluid Pressure ◽  
Piping System ◽  
Internal Dynamic ◽  
Structural Damping ◽  
Pipe System ◽  
Internal Fluid

The traditional approach to designing a piping system subject to internal dynamic pressure is to restrain the piping as much as possible, and the approximation made in the analysis is to assume no contribution of structural energy dissipation. To determine the validity of this concept and approximation, an experimental study of a piping system was performed to measure the influence of structural damping. A pipe system was designed with a loop that could be turned so that its natural frequency would match that of the contained liquid. It was discovered that a properly sized damper on the piping loop greatly accelerates the decay of the fluid pressure transient. The damper absorbs some energy from the piping, reducing the resulting rebound fluid pressure. When the loop is subjected to forced steady-state vibration, there is a fluid pressure response. The amplitude of that pressure can be reduced by installing an external damper: the stiffer the damper the more effective it is in reducing dynamic pressure.

Influence of Elevated Temperature on the Acoustic Emission Evaluation of FRP Vessels Through Internal Fluid Pressure Tests

2009 ◽  
Vol 131 (5) ◽  
Author(s):  
Guillermo Ramirez ◽  
Paul H. Ziehl ◽  
Timothy J. Fowler
Keyword(s):  
Acoustic Emission ◽  
Elevated Temperature ◽  
Operating Temperature ◽  
Fluid Pressure ◽  
Pressure Vessels ◽  
The Body ◽  
Emission Testing ◽  
Internal Fluid ◽  
Asme Code ◽  
Acoustic Emission Testing

A research program evaluating the effect of elevated temperature in the acoustic emission testing of fiberglass vessels was completed recently. The program aimed at evaluating the current ASME provisions that require acoustic emission testing for Class II vessels be carried out at operating temperature in the event that the operating temperature exceeds 49°C (120°F). Lack of data from fiber reinforced polymer vessels and/or components that have been subjected to acoustic emission evaluation at elevated temperature has resulted in speculation regarding the appropriateness of conducting the acoustic emission evaluation at elevated temperature. To address these issues, an experimental investigation was conducted on representative coupon specimens and pressurized cylindrical specimens at differing temperatures. The results from the coupon tests were presented in a previous publication. This paper will present the results of the cylindrical specimens and compare them to the coupon specimens drawing the final conclusions from the overall results of the program. The results from this study resulted in changes in the body of the ASME code for testing pressure vessels with acoustic emission at temperature.

FLANGED JOINT ANALYSIS: A SIMPLIFIED METHOD BASED ON ELASTIC INTERACTION

1993 ◽  
Vol 17 (2) ◽  
pp. 181-196 ◽  
Author(s):  
A. Bouzid ◽  
A. Chaaban
Keyword(s):  
Fluid Pressure ◽  
Elastic Interaction ◽  
Bolted Joints ◽  
Joint Analysis ◽  
Simple Analytical Model ◽  
Good Design ◽  
Sealing Performance ◽  
Internal Fluid ◽  
Simplified Method ◽  
Joint Behaviour

Structurally sound bolted joints often fail due to loss of tightness. This is because the clamping load is affected by the application of the internal fluid pressure. A good design technique should therefore encompass most aspects of joint behaviour and produce efficient sealing performance within the clearly defined limits of the method used. This paper presents a simple analytical model based on an extension of the Taylor Forge approach taking into account flange rotation, flexibility of both the gasket and the bolts and, when applicable, the stiffness of the end closure. Examples will be discussed based on experimentally determined gasket properties.

Sign in / Sign up

Export Citation Format

Share Document