Критический ток в длинном джозефсоновском контакте во внешнем магнитном поле при слабом пиннинге

The analysis of possible current distributions when passing current through a periodically modulated long Josephson contact located in an external magnetic field is carried out. An approach based on the analysis of continuous configuration modification proceeding in the direction of Gibbs potential reduction is used for the calculation. The case when the pinning parameter is less than the critical value is considered. It is shown that at any value of the external magnetic field, there is a critical value of the transport current, when exceeded, the situation ceases to be stationary, as a result of which energy passes into radiation and heat, i.e. currents cease to be persistent. The value of the critical current is determined by the value of the magnetic field at which the vortices begin to fill the entire length of the contact. With an increase in the external magnetic field, the critical value of the current decreases.

Ancient Andean Houses: Making, Inhabiting, Studying

In an extensive survey of vernacular architecture from across the entire length of the Andes, this book explores the diverse ways ancient peoples made houses, the ways houses re-create culture, and new perspectives and methods for studying houses.

THE STATE OF THE ICHTHYOFAUNA OF THE SELETA RIVER

The Silety River originates in the territory of Akmola region near the village of Bozaygyr in the Shortandinsky district and flows into the lake Silety-Teniz, located on the territory of the Ualikhanov district of the North Kazakhstan region. In a number of localities, the Silety River is a drinking reservoir. In addition, the Silety river is of great recreational importance, and serves as a place for amateur fishing. In a number of localities, the Silety River is a drinking reservoir. In addition, the Silety river is of great recreational importance, and serves as a place for amateur fishing. In a number of localities, the Silety River is a drinking reservoir. In addition, the Silety river is of great recreational importance, and serves as a place for amateur fishing. All mass species of fish living in the Sileta River, they are found throughout its entire length, thus, the composition of the commercial ichthyofauna has similarities in all commercial areas. The article provides information about the features and current state of the ichthyofauna of the Sileti River. The assessment of the current state of stocks of the main commercial fish species is given.

Re-evaluating the actin-dependence of spectraplakin functions during axon growth and maintenance

Axons are the long and slender processes of neurons constituting the biological cables that wire the nervous system. The growth and maintenance of axons require bundles of microtubules that extend through their entire length. Understanding microtubule regulation is therefore an essential aspect of axon biology. Key regulators of neuronal microtubules are the spectraplakins, a well-conserved family of cytoskeletal cross-linkers that underlie neuropathies in mouse and humans. Spectraplakin deficiency in mouse or Drosophila causes severe decay of microtubule bundles and axon growth inhibition. The underlying mechanisms are best understood for Drosophila Short stop (Shot) and believed to involve cytoskeletal cross-linkage: the N-terminal calponin homology (CH) domains bind to F-actin, and the C-terminus to microtubules and Eb1. Here we have gained new understanding by showing that the F-actin interaction must be finely balanced: altering the properties of F-actin networks or deleting/exchanging Shot's CH domains induces changes in Shot function - with a Lifeact-containing Shot variant causing remarkable remodelling of neuronal microtubules. In addition to actin-MT cross-linkage, we find strong indications that Shot executes redundant MT bundle-promoting roles that are F-actin-independent. We argue that these likely involve the neuronal Shot-PH isoform, which is characterised by a large, unexplored central plakin repeat region (PRR). Work on PRRs might therefore pave the way towards important new mechanisms of axon biology and architecture that might similarly apply to central PRRs in mammalian spectraplakins.

Metal Pollution Assessment of Surface Water in the Emission Field of the Slovinky Tailing Impoundment (Slovakia)

The focus of this work is on the evaluation of selected water quality indicators as per the applicable regulations, taking into account European and national legislation and the evaluation of the risk of contamination of surface waters with toxic elements using the contamination factor (Cfi) and the degree of pollution (Cd). The studied area of Slovinky is an important ore region, with rich deposits of copper and silver ores that have been mined for centuries. One of the most important remnants of mining activities in this area is the Slovinky tailing impoundment. The sludge pond area has an area of 15 ha, and the height of the dam is 113 metres above sea level, which makes the sludge pond one of the tallest water structures in Slovakia. The Slovinský creek was monitored in the years 2010, 2011, and 2019 at five sampling points, which were selected to map the entire length of the water flow from the source to the estuary to the river Hornád. Risk elements (As, Cu, Cd, and Fe) and physicochemical parameters (such as temperature, dissolved oxygen concentration, conductivity, resistivity, salinity, total dissolved solids, NaCl, redox potential, and pH) were included in this study and evaluated according to applicable regulations, taking into account European legislation (Act No. 269/2010 Coll., guideline value WHO 2011). The results of the experimental studies showed that the highest values of As and Cu were measured at the site where drainage waters from the Slovinky tailing impoundment and mining water of the Alžbeta shaft flow into the creek. The concentration of As exceeded the limit value by up to 31 times and the concentration of Cu 16.8–134.5 times. At the same time, the highest values of conductivity, salinity, total dissolved solids, and NaCl were found, and there was no acidification of water at the site that had the highest pollution. Water contamination was assessed based on Cfi and Cd; our findings showed that the surface water from the site of contamination, along the entire length of the stream, was very highly contaminated with risk elements in the order of As > Fe > Cu, and the level of contamination decreased with distance from the site of contamination. Our research shows that seepage of toxic substances from sludge ponds and abandoned mines has caused the requirements for the quality of surface water of the Slovinský creek not to be met. In connection with mining activities, surface streams act as a transport medium through which other components of the environment can be polluted.

The fourth coast, revisited

The author traveled for 2.5 months by canoe and other modes of transport down the entire length of the Mississippi River with the Mississippi. An Anthropocene River project. Reflecting on this journey, this essay revisits Catherine Brown and William Morrish’s 1991 essay, The Fourth Coast: An Expedition on the Mississippi River, in which Brown and Morrish document their research efforts to identify coherent anthropogenic structures and systems that could warrant the characterization of the Mississippi River as a Fourth Coast. To encourage a flourishing of overlapping multispecies life, the essay moves beyond their spatial reimagining by defining the “distributed nature of home” as a model for conceptualizing distributed spatialities and plural temporalities along the Mississippi River.

Innervation of the clavicle: a cadaveric investigation

BackgroundThis cadaveric study investigated the innervations of the clavicle and clavicular joints (ie, sternoclavicular and acromioclavicular joints).MethodsTwenty cadavers (40 clavicles) were dissected. A skin incision was made to permit exposure of the posterior cervical triangle and infraclavicular fossa. The platysma, sternocleidomastoid, and trapezius muscles were cleaned in order to identify the supraclavicular nerves. Subsequently, the suprascapular and subclavian nerves were localized after removal of the prevertebral layer of the deep cervical fascia. In the infraclavicular region, the pectoralis major and minor muscles were retracted laterally in order to visualize the lateral pectoral nerve. The contribution of all these nerves to the clavicular bone and joints were recorded.ResultsAlong their entire length, all clavicular specimens received contributions from the supraclavicular nerves. The latter innervated the cephalad and ventral aspects of the clavicular bone. The caudal and dorsal aspects of the clavicle were innervated by the subclavian nerve (middle and medial thirds). The lateral pectoral nerve supplied the caudad aspect of the clavicle (middle and lateral thirds). The sternoclavicular joint derived its innervation solely from the supraclavicular nerves whereas the acromioclavicular joint was supplied by the supraclavicular and lateral pectoral nerves.ConclusionThe clavicle and clavicular joints are innervated by the subclavian, lateral pectoral, and supraclavicular nerves. Clinical trials are required to determine the relative importance and functional contribution of each nerve.

Slotting mechanization for intensive garden planting

The paper presents a structure diagram of a slot trencher when planting a garden, consisting of a frame on which working sections, a bevel gear reducer and support wheel stands are fixed. On the working section there is a shaft with a working body - a disk slot cutter. It is made in the form of a disc with teeth, one cutting edge of each tooth is straight and the other edge is parabolic. On the parabolic edge the working elements are fixed in the form of knives with a cutting edge consisting of two parts. A straight one is along the periphery; the other is in the form of a guide along the entire length of the curved edge of the tooth and equal to the width of the cutting edge of the knife. The theoretical substantiation of the main structure parameters is carried out as a result of which the length of the inclined knife is determined, which allows satisfying the operating conditions of the device.

Morphological characterization of natural orchids Dendrobium spp.

Dendrobium is characterized by long pseudobulbs or canes with soft leaves over the entire length, or in some species short or swollen pseudobulbs with two leathery leaves. The inflorescence is composed from dozens of flowers of different sizes and colors. This study aimed to identify the quantitative morphological character of five species of Dendrobium spp. namely D. mirbelianum, D. lamellatum from Java, D. anosmum from South Kalimantan, D. bracteosum from Papua, and D. purpureum from North Sumatera. The resulted dendrogram based on the similarity matrix were divided into two clusters, among the five species the value of similarity coefficient is 1.50. The first cluster is only composed from D. mirbelianum, the second cluster is D. lamellatum, D. purpureum, D. bracteosum, and D. anosmum which have more distant relationship with the other three orchids. Moreover, D. lamellatum and D. purpureum have the closest similarity coefficient with 0.81 value, which have bigger chance to use as the parents for hybridization. There are many Dendrobiums spp. distribution which based on the relationship area. In addition to quantitative properties, it also needs to be expanded to qualitative, anatomy, cytology, and also molecular characteristic to have more comprehensive data.

Results of Laboratory Studies of Soil Sifting in a Rod Elevator with Asymmetric Arrangement of Web Agitators and Adjustable Elevator Apron Angle

Introduction. An increase in crop production from the growing area of both vegetable root crops and all agricultural products results in grows of the load on the machine-technology complex when harvesting. The reason is that in the structure of machine-technological complexes there are not devices providing the qualitative screening of the heap incoming for processing. The purpose of the study is to identify the areas with the minimum value of soil screening on the rod elevator surface depending on the elevator apron angle and to develop recommendations and proposals for improving the separation quality. Materials and Methods. The article describes the methodology and results of laboratory studies of rod elevators with an asymmetric arrangement of web agitators and an adjustable elevator apron angle to determine the soil screening quality on its surface. We used the method of comprehensive assessment of the quality and stability of technological operations based on quantitative optimization criteria. Results. The highest value of the screened soil weight is at the wavelength attenuation section of the rod elevator working branch 1,020 mm cause by action of the elliptical web agitator at an elevation angle of 5 gon. Discussion and Conclusion. The rod elevator with asymmetric arrangement of web agitators and adjustable elevator apron angle increases the soil screening quality along the entire length of the elevator apron by 10 %, and therefore increases the completeness of separation of root crops from soil impurities.