HighlightsRiparian buffers and vegetative filter strips are uniquely susceptible to preferential flow.An innovative method is proposed to partition infiltration into matrix and macropore domains.Riparian buffer matrix and plot-scale infiltration experiments were simulated with HYDRUS-1D and VFSMOD.Preferential flow accounted for 32% to 47% of infiltration depending on hydrologic conditions.Preferential flow mechanisms should be incorporated into riparian buffer design tools and models.Abstract. Riparian buffers are uniquely susceptible to preferential flow due to the abundance of root channels, biological activity, and frequent wetting and drying cycles. Previous research has indicated such susceptibility and even measured the connectivity of preferential flow pathways with adjacent streams and rivers. However, limited research has attempted to partition the riparian buffer infiltration between matrix and preferential flow domains. The objectives of this research were to develop an innovative method to quantify soil matrix infiltration at the plot scale, develop a method to partition infiltration into matrix and macropore infiltration at the plot scale, and then use these methods to quantify the significance of macropore infiltration at a riparian buffer site. This research further demonstrated the importance of considering preferential flow processes in design tools and models to evaluate riparian buffer effectiveness. Sprinkler and runon field experiments were conducted at an established riparian buffer site with sandy loam soil. Trenches were installed and instrumented with soil moisture sensors along the width of the riparian buffer (i.e., along the flow path toward the stream) for detecting non-uniform flow patterns due to preferential flow. Riparian buffer parameters, including soil hydraulic parameters, were estimated using HYDRUS-1D for the sprinkler experiments and VFSMOD for the runon experiments. This research partitioned the infiltration into matrix and preferential flow domains by assuming negligible exchange of water between the soil matrix and preferential flow pathways in comparison to the magnitude of soil matrix flow. For these experimental conditions with 0.20 to 0.48 L s-1 of runon and initial soil water contents of 0.29 to 0.32 cm3 cm-3, preferential flow accounted for at least 27% to 32% of the total runon water entering the riparian buffer. This corresponded to approximately 32% to 47% of the total infiltration. While increasing the riparian buffer plot soil hydraulic conductivity in single-porosity models can adequately predict the total infiltration and therefore the surface outflow from the buffer, design tools and models should specifically consider preferential flow processes to improve predictive power regarding the actual infiltration processes and correspondingly the non-equilibrium flow and solute transport mechanisms. Keywords: Flow partitioning, HYDRUS, Matrix flow, Preferential flow, Riparian buffer, VFSMOD.
Quantifying the Importance of Preferential Flow in a Riparian Buffer
