Engineering Properties of Organic Materials for Near Infra-Red Applications

2006 ◽  
Author(s):  
Jian Li ◽  
Evan L.. Williams ◽  
Kirsi Haavisto ◽  
Ghassan E.. Jabbour
Keyword(s):  
Organic Materials ◽  
Engineering Properties ◽  
Infra Red

Application of Improved Voltage Compensation in the SEM to Imaging of Organic Materials

1973 ◽  
Vol 31 ◽  
pp. 444-445
Author(s):  
P.J. Killingworth ◽  
M. Warren
Keyword(s):  
Electron Beam ◽  
Organic Materials ◽  
Operating Parameters ◽  
Low Density ◽  
Beam Diameter ◽  
Incident Electron Beam ◽  
Specimen Material ◽  
Voltage Compensation ◽  
Selection Of ◽  
Scanning Electron

Ultimate resolution in the scanning electron microscope is determined not only by the diameter of the incident electron beam, but by interaction of that beam with the specimen material. Generally, while minimum beam diameter diminishes with increasing voltage, due to the reduced effect of aberration component and magnetic interference, the excited volume within the sample increases with electron energy. Thus, for any given material and imaging signal, there is an optimum volt age to achieve best resolution.In the case of organic materials, which are in general of low density and electric ally non-conducting; and may in addition be susceptible to radiation and heat damage, the selection of correct operating parameters is extremely critical and is achiev ed by interative adjustment.

Electron Microscopy of Human Gallstones

1971 ◽  
Vol 29 ◽  
pp. 296-297
Author(s):  
C. Wolpers ◽  
R. Blaschke
Keyword(s):  
Electron Microscopy ◽  
Room Temperature ◽  
Bile Pigment ◽  
X Ray Diffraction ◽  
Triclinic Crystal System ◽  
X Ray ◽  
Follow Up Study ◽  
Infra Red ◽  
Main Components

Scanning microscopy was used to study the surface of human gallstones and the surface of fractures. The specimens were obtained by operation, washed with water, dried at room temperature and shadowcasted with carbon and aluminum. Most of the specimens belong to patients from a series of X-ray follow-up study, examined during the last twenty years. So it was possible to evaluate approximately the age of these gallstones and to get information on the intensity of growing and solving.Cholesterol, a group of bile pigment substances and different salts of calcium, are the main components of human gallstones. By X-ray diffraction technique, infra-red spectroscopy and by chemical analysis it was demonstrated that all three components can be found in any gallstone. In the presence of water cholesterol crystallizes in pane-like plates of the triclinic crystal system.

200kv superconducting cryo electron microscope

1987 ◽  
Vol 45 ◽  
pp. 642-643
Author(s):  
M. Iwatsuki ◽  
Y. Kokubo ◽  
Y. Harada ◽  
J. Lehman
Keyword(s):  
Electron Microscope ◽  
Structure Analysis ◽  
Organic Materials ◽  
Strong Interactions ◽  
Specimen Preparation ◽  
Great Effort ◽  
Electron Microscopic ◽  
Crystal Fields ◽  
Special Skill ◽  
Long Time

In recent years, the electron microscope has been significantly improved in resolution and we can obtain routinely atomic-level high resolution images without any special skill. With this improvement, the structure analysis of organic materials has become one of the interesting targets in the biological and polymer crystal fields.Up to now, X-ray structure analysis has been mainly used for such materials. With this method, however, great effort and a long time are required for specimen preparation because of the need for larger crystals. This method can analyze average crystal structure but is insufficient for interpreting it on the atomic or molecular level. The electron microscopic method for organic materials has not only the advantage of specimen preparation but also the capability of providing various information from extremely small specimen regions, using strong interactions between electrons and the substance. On the other hand, however, this strong interaction has a big disadvantage in high radiation damage.

STM of freeze-fracture replicas: Problems and promises

1993 ◽  
Vol 51 ◽  
pp. 68-69
Author(s):  
J. T. Woodward ◽  
J. A. N. Zasadzinski
Keyword(s):  
Scanning Tunneling Microscope ◽  
Organic Materials ◽  
Freeze Fracture ◽  
Atomic Resolution ◽  
Scanning Tunneling ◽  
Tunneling Microscope ◽  
Molecular Scale ◽  
Organic Surfaces ◽  
Metal Layers ◽  
Conductive Surfaces

The Scanning Tunneling Microscope (STM) offers exciting new ways of imaging surfaces of biological or organic materials with resolution to the sub-molecular scale. Rigid, conductive surfaces can readily be imaged with the STM with atomic resolution. Unfortunately, organic surfaces are neither sufficiently conductive or rigid enough to be examined directly with the STM. At present, nonconductive surfaces can be examined in two ways: 1) Using the AFM, which measures the deflection of a weak spring as it is dragged across the surface, or 2) coating or replicating non-conductive surfaces with metal layers so as to make them conductive, then imaging with the STM. However, we have found that the conventional freeze-fracture technique, while extremely useful for imaging bulk organic materials with STM, must be modified considerably for optimal use in the STM.

Stabilizing pyritic material

1989 ◽  
Vol 4 ◽  
pp. 244-248 ◽  
Author(s):  
Donald L. Wolberg
Keyword(s):  
Significant Contribution ◽  
Organic Materials ◽  
Sedimentary Rocks ◽  
Iron Sulfides ◽  
Decomposition Products ◽  
Iron Minerals ◽  
Pyrite Formation ◽  
Organic Sediments ◽  
Freshwater Environments

The minerals pyrite and marcasite (broadly termed pyritic minerals) are iron sulfides that are common if not ubiquitous in sedimentary rocks, especially in association with organic materials (Berner, 1970). In most marine sedimentary associations, pyrite and marcasite are associated with organic sediments rich in dissolved sulfate and iron minerals. Because of the rapid consumption of sulfate in freshwater environments, however, pyrite formation is more restricted in nonmarine sediments (Berner, 1983). The origin of the sulfur in nonmarine environments must lie within pre-existing rocks or volcanic detritus; a relatively small, but significant contribution may derive from plant and animal decomposition products.

The infra-red spectra of B-chloro- and B-bromoborazoles

1962 ◽  
Vol 18 (4) ◽  
pp. 1487-1497 ◽  
Author(s):  
I BUTCHER ◽  
W GERRARD ◽  
E MOONEY ◽  
R ROTHENBURY ◽  
H WILLIS
Keyword(s):  
Infra Red
Sign in / Sign up

Export Citation Format

Share Document