Coal Combustion Fly Ash Characterization: Electron Spectroscopy for Chemical Analysis, Energy Dispersive X-ray Analysis, and Scanning Electron Microscopy

1980 ◽  
Vol 34 (5) ◽  
pp. 549-555 ◽  
Author(s):  
S. J. Rothenberg ◽  
P. Denee ◽  
P. Holloway
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fly Ash ◽  
Chemical Analysis ◽  
Electron Spectroscopy ◽  
Energy Dispersive ◽  
Compositional Variation ◽  
X Ray ◽  
Calcium Iron ◽  
Scanning Electron

The surface and bulk properties of five samples of fly ash have been examined by electron spectroscopy for chemical analysis (ESCA), scanning electron microscopy (SEM) and energy dispersive x-ray analysis (EDXA). Samples from a conventional pulverized coal combustor, a conventional stoker-fed combustor, and an experimental fluidized bed combustor (FBC) were examined. ESCA data indicated that all samples contained silicon, aluminum, magnesium, calcium, iron, potassium, carbon, oxygen, and sulfur and all but one contained titanium. Samples from the conventional combustors contained more carbon than samples from the FBC. FBC samples contained large amounts of calcium and magnesium. Valence states of some elements were obtained by a detailed examination of selected ESCA peaks. Sputtering was performed on two samples to obtain a depth profile of the composition. The EDXA data confirmed the presence of silicon, aluminum, magnesium, calcium, iron, potassium, sulfur, and titanium while chlorine was detected in some samples. The EDXA data for individual particles exhibited marked particle to particle compositional variation. SEM studies demonstrated that the morphology of FBC samples was different from that of all of the conventional combustor samples examined.

scholarly journals Properties of Formula 127 Glass Prepared with Radioactive Zirconia Calcine

1982 ◽  
Vol 15 ◽  
Author(s):  
Bruce Staples ◽  
Hugh Cole ◽  
Dan Pavlica
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Solid State ◽  
Chemical Analysis ◽  
Electron Spectroscopy ◽  
Laboratory Scale ◽  
Energy Dispersive ◽  
X Ray ◽  
Scanning Electron

ABSTRACTFormula 127 glass has been developed to immobilize ICPP zirconia calcine. This glass has been prepared remotely on a laboratory scale basis with radioactive zirconia calcine retrieved after ten years of storage from Bin Set 2. The aqueous leachability of the glass produced was investigated and compared through application of standard leach tests with that of Formula 127 glass prepared with simulated calcine. Solid state properties of the glasses prepared with actual and simulated calcines were also compared through application of electron spectroscopy for chemical analysis (ESCA) and scanning electron microscopy (SEM) with energy dispersive X-ray (EDS).

Analyse des Stuckgipses der Abtei Villers / Analysis of Stucco from the Abbey of Villers

1997 ◽  
Vol 3 (4) ◽  
pp. 381-396
Author(s):  
S. Chandra ◽  
D. Van Gemert
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Chemical Analysis ◽  
Electron Spectroscopy ◽  
Natural Polymer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Abstract Interior plaster from the Abbot's Palace of the Abbey of Villers-la-Ville, Brabant Wallon province, Belgium has been investigated. It is done by using chemical analysis, x-ray diffraction analysis, scanning electron microscopy, energy dispersive electron spectroscopy, and transmission electron microscopy. It is found that the rendering was made with lime rich mortar and animal hairs. The sand used was very fine and the hairs were very short. The solid constituents and the hairs were uniformly dispersed, which could have been obtained by the addition of some other natural polymer, containing protein.

MSWI Fly Ash Particle Analysis by Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy

2004 ◽  
Vol 38 (24) ◽  
pp. 6669-6675 ◽  
Author(s):  
S. Gilardoni ◽  
P. Fermo ◽  
F. Cariati ◽  
V. Gianelle ◽  
D. Pitea ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fly Ash ◽  
Energy Dispersive ◽  
Particle Analysis ◽  
Mswi Fly Ash ◽  
X Ray ◽  
Scanning Electron

scholarly journals Determination of mercury content in hard coal and fly ash using X-ray diffraction and scanning electron microscopy coupled with chemical analysis

2019 ◽  
Vol 12 (8) ◽  
pp. 3927-3942 ◽  
Author(s):  
Przemysław Rompalski ◽  
Adam Smoliński ◽  
Hanna Krztoń ◽  
Jarosław Gazdowicz ◽  
Natalia Howaniec ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Fly Ash ◽  
Chemical Analysis ◽  
Mercury Content ◽  
Hard Coal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Scanning Electron

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

Geochemistry of halloysite-7Å formation from plagioclase in trachyandesite rocks from Limnos Island, Greece

Clay Minerals ◽  
2014 ◽  
Vol 49 (1) ◽  
pp. 75-89 ◽  
Author(s):  
D. Papoulis ◽  
S. Komarneni ◽  
D. Panagiotaras
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Chemical Analysis ◽  
Geochemical Data ◽  
X Ray Diffraction ◽  
Polarizing Microscopy ◽  
X Ray ◽  
Geochemical Evaluation ◽  
Scanning Electron ◽  
Southwest Part

AbstractTrachyandesite rocks, occurring over an area of about 1 km2in the southwest part of Limnos Island, Greece, are altered mainly to halloysite. The samples were collected and analysed by polarizing microscopy, powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and chemical analysis. The alteration of plagioclase to halloysite follows seven discrete stages that are described in detail. The geochemical evaluation of the data shows enrichment of the lightREE(LREE) over heavyREE(HREE) as expressed by the (La/Yb)n ratio. TheΣLREErange from 206.44 to 272.30, while the sum ofHREEvaries from 11.01 to 26.26. The (La/Yb)n ratio ranges from 9.72 to 27.64. Fractionation amongLREEexpressed as (La/Sm)n and between middleREE(MREE) andHREEis shown as (Tb/Yb)n ratios. The most altered rocks close to the fault zone have high (Tb/Yb)n ratios and low (La/Sm)n and Eu/Eu* ratios. Although mineralogy and clay mineral textures indicate hydrothermal genesis of halloysite, the geochemical data are not conclusive due to a secondary weathering effect.

Identification of Nd163 phase in melt-textured NdBa2Cu3O7−δ bulk samples

2003 ◽  
Vol 18 (9) ◽  
pp. 2050-2054 ◽  
Author(s):  
Marcello Gombos ◽  
Vicente Gomis ◽  
Anna Esther Carrillo ◽  
Antonio Vecchione ◽  
Sandro Pace ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscopy ◽  
Room Temperature ◽  
Polarized Light ◽  
Energy Dispersive ◽  
X Ray ◽  
Spontaneous Formation ◽  
The Stability ◽  
Scanning Electron

In this work, we report on the observation of Nd1Ba6Cu3O10,5 (Nd163) phase of the NdBaCuO system in melt-textured Nd123 bulk samples grown from a mixture of Nd123 and Nd210 phase powders. The observation was performed with polarized light optical microscopy and scanning electron microscopy–energy dispersive x-ray analyses. Images of the identified phase crystals show an aspect quite different from Nd422 crystals. Unexpectedly, Nd163 was individuated, even in “pure” Nd123 samples. Moreover, after long exposure to air, Nd163 disappeared completely in samples synthesized from powders containing Nd210. Thermogravimetry analyses of powders show that the stability of this phase in air is limited to temperatures higher than 900 °C, so Nd163 is unstable and highly reactive at room temperature. Moreover, an explanation of the observation of Nd163 in Nd210 free samples, based on the spontaneous formation of Nd163 phase in a Nd123 melt, is proposed.

Sign in / Sign up

Export Citation Format

Share Document