Identification of Nd163 phase in melt-textured NdBa2Cu3O7−δ bulk samples

2003 ◽  
Vol 18 (9) ◽  
pp. 2050-2054 ◽  
Author(s):  
Marcello Gombos ◽  
Vicente Gomis ◽  
Anna Esther Carrillo ◽  
Antonio Vecchione ◽  
Sandro Pace ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscopy ◽  
Room Temperature ◽  
Polarized Light ◽  
Energy Dispersive ◽  
X Ray ◽  
Spontaneous Formation ◽  
The Stability ◽  
Scanning Electron

In this work, we report on the observation of Nd1Ba6Cu3O10,5 (Nd163) phase of the NdBaCuO system in melt-textured Nd123 bulk samples grown from a mixture of Nd123 and Nd210 phase powders. The observation was performed with polarized light optical microscopy and scanning electron microscopy–energy dispersive x-ray analyses. Images of the identified phase crystals show an aspect quite different from Nd422 crystals. Unexpectedly, Nd163 was individuated, even in “pure” Nd123 samples. Moreover, after long exposure to air, Nd163 disappeared completely in samples synthesized from powders containing Nd210. Thermogravimetry analyses of powders show that the stability of this phase in air is limited to temperatures higher than 900 °C, so Nd163 is unstable and highly reactive at room temperature. Moreover, an explanation of the observation of Nd163 in Nd210 free samples, based on the spontaneous formation of Nd163 phase in a Nd123 melt, is proposed.

scholarly journals Preparation and Phase Relations in the CuSbSe2 – CuInSe2 System

2016 ◽  
Vol 1735 ◽  
Author(s):  
Barys V. Korzun ◽  
Valery R. Sobol ◽  
Marin Rusu ◽  
Ruben M. Savizky ◽  
Alena A. Fadzeyeva ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscopy ◽  
Mole Fraction ◽  
Powder Diffraction ◽  
Room Temperature ◽  
Phase Relations ◽  
X Ray ◽  
Ternary Compounds ◽  
Scanning Electron

ABSTRACTThe CuInSe2 and CuSbSe2 ternary compounds and alloys of the (CuSbSe2)1-x·(CuInSe2)x system with the mole fraction of CuInSe2 (x) equal to 0.05, 0.15, 0.25, 0.375, 0.50, 0.625, 0.75, 0.85, and 0.95 were prepared and the phase relations in this system were investigated by X-ray powder diffraction, optical microscopy, and scanning electron microscopy. It was shown that the alloys of the CuSbSe2-CuInSe2 system are biphasic at room temperature in the whole range of compositions, and the limits of solubility for CuSbSe2 in CuInSe2 and for CuInSe2 in CuSbSe2 do not exceed 0.001 mole fraction.

MICROSTRUCTURAL STUDIES OF SUPERCONDUCTING 3EuBa2Cu3Oy:AgO AND 3GdBa2Cu3Oy:AgO COMPOSITES

1989 ◽  
Vol 03 (11) ◽  
pp. 877-885
Author(s):  
C.Y. HUANG ◽  
H.H. TAI ◽  
M.K. WU
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Light Microscopy ◽  
Silver Particle ◽  
Polarized Light ◽  
Energy Dispersive ◽  
X Ray ◽  
Grain Formation ◽  
Microstructural Studies ◽  
Scanning Electron

Scanning electron microscopy, energy dispersive X-ray spectroscopy, and polarized light microscopy have shown that the addition of AgO to the E uBa 2 Cu 3 O y and GdBa 2 Cu 3 O y systems results in the growth of very large grains. Distribution of silver particle appears to influence the grain formation and growth in the superconducting composites.

scholarly journals Egyptian Blue Pellets from the First Century BCE Workshop of Kos (Greece): Microanalytical Investigation by Optical Microscopy, Scanning Electron Microscopy-X-ray Energy Dispersive Spectroscopy and Micro-Raman Spectroscopy

Minerals ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1063
Author(s):  
Ariadne Kostomitsopoulou Marketou ◽  
Fabrizio Andriulo ◽  
Calin Steindal ◽  
Søren Handberg
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Raman Spectroscopy ◽  
Optical Microscopy ◽  
First Century ◽  
Energy Dispersive ◽  
X Ray ◽  
Egyptian Blue ◽  
Micro Raman Spectroscopy ◽  
Scanning Electron

This paper aims to expand our understanding of the processes involved in the production of the artificial pigment Egyptian blue through the scientific examination of pigments found in the first century BCE workshop of the Greek island of Kos. There, 136 Egyptian blue pellets were brought to light, including successfully produced pellets, as well as partially successful and unsuccessful products. This study is based on the examination of eighteen samples obtained from pellets of various textures and tones of blue, including light and dark blue pigments, coarse and fine-grained materials, and one unsuccessful pellet of dark green/grey colour. The samples were examined by optical microscopy, scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDS), and micro-Raman spectroscopy. These complementary microanalytical techniques provide localised information about the chemical and mineralogical composition of this multicomponent material, at a single-grain level. The results shed light on the firing procedure and indicate possible sources for raw materials (beach sand, copper alloys), as well as demonstrating the use of a low-alkali starting mixture. Moreover, two different process for the production of light blue pigments were identified: (a) decreased firing time and (b) grinding of the initially produced pellet and mixing with cobalt-containing material.

Effect of High Temperature on Morphology and Structure of Nano-Hydroxyapatite/Collagen Composite

2009 ◽  
Vol 610-613 ◽  
pp. 1360-1363 ◽  
Author(s):  
Qiang Song ◽  
Kun Hu ◽  
Fu Zhai Cui ◽  
Zhou Ying He
Keyword(s):  
Electron Microscopy ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Fourier Transform ◽  
High Temperature ◽  
Room Temperature ◽  
Energy Dispersive ◽  
X Ray ◽  
Morphology And Structure ◽  
Scanning Electron

Nano-hydroxyapatite/collagen composite was processed at room temperature, 180°C, 200°C and 220°C under atmosphere for 10 min respectively. The morphology of the samples was characterized by scanning electron microscopy (SEM). The structure and components of the samples were investigated by energy dispersive spectrograph (EDS), X-ray powder diffractometer (XRD) and Fourier transform infrared (FTIR). The results of SEM and EDS for nHAC changed greatly at 200°C and 220°C in comparison with room temperature. The morphology and structure of nHAC at 180°C were similar to those at room temperature. It was demonstrated that nHAC possessed thermal stability in morphology and structure.

Effect of Vanadium and Niobium on the Microstructure of Carbide Reinforced Indefinite Chilled Cast Rolls

2011 ◽  
Vol 311-313 ◽  
pp. 864-870
Author(s):  
Gen Zhe Huang ◽  
Zeng Hui Li
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Optical Microscopy ◽  
Critical Point ◽  
Volume Fraction ◽  
Microstructural Analysis ◽  
Energy Dispersive ◽  
X Ray ◽  
Nb Content ◽  
Scanning Electron

In the present work, effects of elements vanadium and niobium on the microstructure of the conventional indefinite chilled rolls made by small vertical centrifugal caster were investigated, using optical microscopy, Scanning Electron Microscopy (SEM, Jeol 6400), Energy Dispersive X-ray Spectroscopy (EDXS, Cu-K radiation) to identify the type, morphology, and to measure the volume fraction and the distribution of carbides and graphites formed during solidification. Microstructural analysis indicates that, the amount of graphite is dramatically reduced by adding V element. The volume fraction of the square-like carbides NbC increases with the Nb content increasing. However, if Nb content is over a critical point, large amount of the square-like NbC carbide can be seriously segregated in the out part of the section.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

Sign in / Sign up

Export Citation Format

Share Document