scholarly journals Heat Transfer Analysis for Stationary Boundary Layer Slip Flow of a Power-Law Fluid in a Darcy Porous Medium with Plate Suction/Injection

PLoS ONE ◽  
2015 ◽  
Vol 10 (9) ◽  
pp. e0138855 ◽  
Author(s):  
Asim Aziz ◽  
Yasir Ali ◽  
Taha Aziz ◽  
J. I. Siddique
2016 ◽  
Vol 9 (1) ◽  
pp. 11-17 ◽  
Author(s):  
Jacob Hirschhorn ◽  
Marisa Madsen ◽  
Antonio Mastroberardino ◽  
Javed Siddique ◽  
◽  
...  

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Yazan Taamneh ◽  
Reyad Omari

This study aims to numerically examine the fluid flow and heat transfer in a porous microchannel saturated with power-law fluid. The governing momentum and energy equations are solved by using the finite difference technique. The present study focuses on the slip flow regime, and the flow in porous media is modeled using the modified Darcy-Brinkman-Forchheimer model for power-law fluids. Parametric studies are conducted to examine the effects of Knudsen number, Darcy number, power law index, and inertia parameter. Results are given in terms of skin friction and Nusselt number. It is found that when the Knudsen number and the power law index decrease, the skin friction on the walls decreases. This effect is reduced slowly while the Darcy number decreases until it reaches the Darcy regime. Consequently, with a very low permeability the effect of power law index vanishes. The numerical results indicated also that when the power law index decreases the fully-developed Nusselt number increases considerably especially, in the limit of high permeability, that is, nonDarcy regime. As far as Darcy regime is concerned the effects of the Knudsen number and the power law index of the fully-developed Nusselt number is very little.


2010 ◽  
Vol 297-301 ◽  
pp. 117-125
Author(s):  
Oscar Bautista ◽  
Federico Méndez ◽  
Eric Bautista

In this work, we have theoretically analyzed the heat convection process in a porous medium under the influence of spontaneous wicking of a non-Newtonian power-law fluid, trapped in a capillary element, considering the presence of a temperature gradient. The capillary element is represented by a porous medium which is initially found at temperature and pressure . Suddenly the lower part of the porous medium touches a reservoir with a non-Newtonian fluid with temperature and pressure . This contact between both phases, in turn causes spontaneously the wicking process. Using a one-dimensional formulation of the average conservation laws, we derive the corresponding nondimensional momentum and energy equations. The numerical solutions permit us to evaluate the position and velocity of the imbibitions front as well as the dimensionless temperature profiles and Nusselt number. The above results are shown by considering the physical influence of two nondimensional parameters: the ratio of the characteristic thermal time to the characteristic wicking time, , the ratio of the hydrostatic head of the imbibed fluid to the characteristic pressure difference between the wicking front and the dry zone of the porous medium, , and the power-law index, n, for the non-Newtonian fluid. The predictions show that the wicking and heat transfer process are strongly dependent on the above nondimensional parameters, indicating a clear deviation in comparison with and n = 1, that represents the classical Lucas-Washburn solution.


2015 ◽  
Vol 121 ◽  
pp. 824-829 ◽  
Author(s):  
Hao Zhang ◽  
Tiantian Xu ◽  
Xinxin Zhang ◽  
Liancun Zheng ◽  
Yuxiang Wang ◽  
...  

2011 ◽  
Vol 15 (suppl. 2) ◽  
pp. 205-220 ◽  
Author(s):  
Iftikhar Ahmad ◽  
Manzoor Ahmed ◽  
Zaheer Abbas ◽  
Muhammad Sajid

In this study, we present a steady three-dimensional magnetohydrodynamic (MHD) flow and heat transfer characteristics of a viscous fluid due to a bidirectional stretching sheet in a porous medium. The heat transfer analysis has been carried out for two heating processes namely (i) the prescribed surface temperature (PST) and (ii) prescribed surface heat flux (PHF). In addition the heat transfer rate varies along the surface. The similarity solution of the governing boundary layer partial differential equations is developed by employing homotopy analysis method (HAM). The quantities of interest are velocity, temperature, skin-friction and wall heat flux. The results obtained are presented through graphs and tabular data. It is observed that both velocity and boundary layer thickness decreases by increasing the porosity and magnetic field. This shows that application of magnetic and porous medium cause a control on the boundary layer thickness. Moreover, the results are also compared with the existing values in the literature and found in excellent agreement.


Sign in / Sign up

Export Citation Format

Share Document