scholarly journals Preliminary prospects of a Carnot-battery based on a supercritical CO2 Brayton cycle

2021 ◽  
Vol 61 (5) ◽  
pp. 644-660
Author(s):  
Karin Rindt ◽  
František Hrdlička ◽  
Václav Novotný
Keyword(s):  
Energy Storage ◽  
Supercritical Co2 ◽  
High Efficiency ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Pressure Ratio ◽  
Working Fluid ◽  
Brayton Cycle ◽  
Round Trip ◽  
Weather Changes

As a part of the change towards a higher usage of renewable energy sources, which naturally deliver the energy intermittently, the need for energy storage systems is increasing. For the compensation of the disturbance in power production due to inter-day to seasonal weather changes, a long-term energy storage is required. In the spectrum of storage systems, one out of a few geographically independent possibilities is the use of heat to store electricity, so-called Carnot-batteries. This paper presents a Pumped Thermal Energy Storage (PTES) system based on a recuperated and recompressed supercritical CO2 Brayton cycle. It is analysed if this configuration of a Brayton cycle, which is most advantageous for supercritical CO2 Brayton cycles, can be favourably integrated into a Carnot-battery and if a similar high efficiency can be achieved, despite the constraints caused by the integration. The modelled PTES operates at a pressure ratio of 3 with a low nominal pressure of 8 MPa, in a temperature range between 16 °C and 513 °C. The modelled system provides a round-trip efficiency of 38.9 % and was designed for a maximum of 3.5 MW electric power output. The research shows that an acceptable round-trip efficiency can be achieved with a recuperated and recompressed Brayton Cycle employing supercritical CO2 as the working fluid. However, a higher efficiency would be expected to justify the complexity of the configuration.

scholarly journals Preliminary prospects of a Pumped Thermal Energy Storage (PTES) based on a supercritical CO2 Brayton cycle

2021 ◽  
Author(s):  
Karin Astrid Senta Edel ◽  
František Hrdlička ◽  
Václav Novotný
Keyword(s):  
Energy Storage ◽  
Thermal Energy ◽  
Thermal Energy Storage ◽  
Supercritical Co2 ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Brayton Cycle ◽  
Term Energy ◽  
Weather Changes

As part of the change towards a higher deployment of renewable energy sources, which naturally deliver energy intermittently, the need for energy storage systems is increasing. For compensation of disturbance in power production due to inter-day to seasonal weather changes, long-term energy storage is required. In the spectrum of storage systems, one out of a few geographically independent possibilities is the storage of electricity in heat, so-called Carnot-Batteries. This paper presents a Pumped Thermal Energy Storage (PTES) system based on a recuperated supercritical CO2 Brayton cycle. The modelled system provides a round-trip efficiency of 38.9%.

Achieving Quasi-Isothermal Air Compression With Multistage Compressors for Large-Scale Energy Storage

2013 ◽  
Author(s):  
Kai Wang ◽  
Peiwen Li ◽  
Ara Arabyan
Keyword(s):  
Energy Storage ◽  
Compression Ratio ◽  
Large Scale ◽  
High Efficiency ◽  
Pressure Ratio ◽  
Compressed Air ◽  
Thermal Source ◽  
Round Trip ◽  
Compression Process ◽  
Compression Scheme

The round trip efficiency of compressed air for energy storage is greatly limited by the significant increase in the temperature of the compressed air (and the resulting heat loss) in high-ratio adiabatic compression. This paper introduces a multi-stage compression scheme with low-compression-ratio compressors and inter-compressor natural convection cooling resulting in a quasi-isothermal compression process that can be useful for large-scale energy storage. When many low pressure ratio compressors work inline, a high overall compression ratio can be achieved with high efficiency. The quasi-isothermally compressed air can then be expanded adiabatically in turbines to generate power with the addition of thermal energy, from either fuel or a solar thermal source. This paper presents mathematical models of such an energy storage system and discusses its round-trip performance with different operating schemes.

Redox Flow Batteries for Energy Storage: A Technology Review

2017 ◽  
Vol 15 (1) ◽  
Author(s):  
Ruijie Ye ◽  
Dirk Henkensmeier ◽  
Sang Jun Yoon ◽  
Zhifeng Huang ◽  
Dong Kyu Kim ◽  
...  
Keyword(s):  
Energy Storage ◽  
Electrode Materials ◽  
High Efficiency ◽  
Storage Systems ◽  
Low Cost ◽  
Renewable Energy Sources ◽  
Active Species ◽  
Energy Storage Systems ◽  
Redox Flow Batteries ◽  
Flow Batteries

The utilization of intermittent renewable energy sources needs low-cost, reliable energy storage systems in the future. Among various electrochemical energy storage systems, redox flow batteries (RFBs) are promising with merits of independent energy storage and power generation capability, localization flexibility, high efficiency, low scaling-up cost, and excellent long charge/discharge cycle life. RFBs typically use metal ions as reacting species. The most exploited types are all-vanadium RFBs (VRFBs). Here, we discuss the core components for the VRFBs, including the development and application of different types of membranes, electrode materials, and stack system. In addition, we introduce the recent progress in the discovery of novel electrolytes, such as redox-active organic compounds, polymers, and organic/inorganic suspensions. Versatile structures, tunable properties, and abundant resources of organic-based electrolytes make them suitable for cost-effective stationary applications. With the active species in solid form, suspension electrolytes are expected to provide enhanced volumetric energy densities.

scholarly journals A Forecasting-Based Control Algorithm for Improving Energy Managment in High Concentrator Photovoltaic Power Plant Integrated with Energy Storage Systems

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4697
Author(s):  
Andrea Salimbeni ◽  
Mario Porru ◽  
Luca Massidda ◽  
Alfonso Damiano
Keyword(s):  
Energy Storage ◽  
Power Plant ◽  
Control Algorithm ◽  
High Efficiency ◽  
Weather Forecasting ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Energy Storage Systems ◽  
Real Time Control ◽  
Power Fluctuation

The High Concentrator Photovoltaic (HCPV) technology, due to its high efficiency, is considered one of the most promising solutions for the exploitation of sun-irradiation-based Renewable Energy Sources (RES). Nevertheless, the HCPV production is strictly connected to the Direct Normal Irradiation (DNI) making this photovoltaic technology more sensible to cloudiness than traditional ones. In order to mitigate the power intermittence and improve production programmability, the integration between Energy Storage Systems (ESSs) and HCPV, resorting to forecasting algorithms, has been investigated. Specifically, a local weather forecasting algorithm has been used for estimating the daily time evolution of DNI, air Temperature (T), Wind Speed (WS), and Air Mass (AM). These data are subsequently processed by means of an accurate HCPV model for the estimation of one day-ahead daily power production profile. The processing of HCPV forecasted generation by means of a properly tuned filter-based algorithm allows one day-ahead the definition of power profiles of ESS and power plant respectively, considering also the ESS constraints and the characteristic of the implemented real-time control algorithm. The effectiveness of the proposed forecasting model and control algorithm is verified through a simulation study referring to the solar power plant constituted by HCPV and ESS installed in Ottana, Italy. The results highlight that the application of the proposed approach lessens the power fluctuation effect caused by HCPV generation preserving the batteries at the same time. The feasibility and advantages of the proposed approach are finally presented.

Modeling an Energy Storage System Based on a Hybrid Renewable Energy System in Stand-alone Applications

2017 ◽  
Vol 68 (11) ◽  
pp. 2641-2645
Author(s):  
Alexandru Ciocan ◽  
Ovidiu Mihai Balan ◽  
Mihaela Ramona Buga ◽  
Tudor Prisecaru ◽  
Mohand Tazerout
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Storage System ◽  
Energy Storage System ◽  
Compressed Air ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Hybrid Renewable Energy System

The current paper presents an energy storage system that stores the excessive energy, provided by a hybrid system of renewable energy sources, in the form of compressed air and thermal heat. Using energy storage systems together with renewable energy sources represents a major challenge that could ensure the transition to a viable economic future and a decarbonized economy. Thermodynamic calculations are conducted to investigate the performance of such systems by using Matlab simulation tools. The results indicate the values of primary and global efficiencies for various operating scenarios for the energy storage systems which use compressed air as medium storage, and shows that these could be very effective systems, proving the possibility to supply to the final user three types of energy: electricity, heat and cold function of his needs.

scholarly journals Economic Analysis of the Investments in Battery Energy Storage Systems: Review and Current Perspectives

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2503
Author(s):  
Paulo Rotella Junior ◽  
Luiz Célio Souza Rocha ◽  
Sandra Naomi Morioka ◽  
Ivan Bolis ◽  
Gianfranco Chicco ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Economic Analysis ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Residential Areas ◽  
Energy Storage Systems ◽  
Battery Energy Storage ◽  
Battery Energy Storage Systems ◽  
Battery Energy

Sources such as solar and wind energy are intermittent, and this is seen as a barrier to their wide utilization. The increasing grid integration of intermittent renewable energy sources generation significantly changes the scenario of distribution grid operations. Such operational challenges are minimized by the incorporation of the energy storage system, which plays an important role in improving the stability and the reliability of the grid. This study provides the review of the state-of-the-art in the literature on the economic analysis of battery energy storage systems. The paper makes evident the growing interest of batteries as energy storage systems to improve techno-economic viability of renewable energy systems; provides a comprehensive overview of key methodological possibilities for researchers interested in economic analysis of battery energy storage systems; indicates the need to use adequate economic indicators for investment decisions; and identifies key research topics of the analyzed literature: (i) photovoltaic systems with battery energy storage systems for residential areas, (ii) comparison between energy storage technologies, (iii) power quality improvement. The last key contribution is the proposed research agenda.

scholarly journals Sizing and Management of Energy Storage Systems in Large-Scale Power Plants Using Price Control and Artificial Intelligence

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3296
Author(s):  
Carlos García-Santacruz ◽  
Luis Galván ◽  
Juan M. Carrasco ◽  
Eduardo Galván
Keyword(s):  
Energy Storage ◽  
Power Plants ◽  
Large Scale ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Ancillary Services ◽  
Energy Sources ◽  
Energy Storage Systems ◽  
Electric System ◽  
Fundamental Part

Energy storage systems are expected to play a fundamental part in the integration of increasing renewable energy sources into the electric system. They are already used in power plants for different purposes, such as absorbing the effect of intermittent energy sources or providing ancillary services. For this reason, it is imperative to research managing and sizing methods that make power plants with storage viable and profitable projects. In this paper, a managing method is presented, where particle swarm optimisation is used to reach maximum profits. This method is compared to expert systems, proving that the former achieves better results, while respecting similar rules. The paper further presents a sizing method which uses the previous one to make the power plant as profitable as possible. Finally, both methods are tested through simulations to show their potential.

scholarly journals A Predictive Control Strategy for Energy Management in Micro-Grid Systems

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1666
Author(s):  
Abdellatif Elmouatamid ◽  
Radouane Ouladsine ◽  
Mohamed Bakhouya ◽  
Najib El kamoun ◽  
Khalid Zine-Dine
Keyword(s):  
Energy Storage ◽  
Energy Management ◽  
Predictive Control ◽  
Energy Production ◽  
Storage Systems ◽  
Control Strategies ◽  
Renewable Energy Sources ◽  
Energy Storage Systems ◽  
Control Approach ◽  
Variable Nature

The integration of renewable energy sources (RES) was amplified, during the past decades, in order to tackle the challenges related to energy demands and CO2 increases. Recently, many initiatives have been taken by promoting the deployment and the usage of micro-grids (MG) in buildings, as decentralized systems, for energy production. However, the variable nature of RESs and the limited size of energy storage systems require the deployment of adaptive control strategies for efficient energy balance. In this paper, a generalized predictive control (GPC) strategy is introduced for energy management (EM) in MG systems. Its main objective is to efficiently connect the electricity generators and consumers in order to predict the most suitable actions for energy flow management. In fact, based on energy production and consumption profiles as well as the availability of energy storage systems, the proposed EM will be able to select the best suitable energy source for supplying the building’s loads. It will efficiently manage the usage of energy storage and the utility grid while maximizing RESs power generation. Simulations have been conducted, using real-sitting scenarios, and results are presented to validate the proposed predictive control approach by showing its effectiveness for MG systems control.

Flywheel energy storage systems and their applications in power engineering

2021 ◽  
Vol 6 ◽  
pp. 26-34
Author(s):  
Vladimir Poltavets ◽  
Irina Kolchanova
Keyword(s):  
Renewable Energy ◽  
Energy Storage ◽  
Storage Systems ◽  
Renewable Energy Sources ◽  
Supply And Demand ◽  
Electric Energy ◽  
Energy Generation ◽  
Flywheel Energy Storage ◽  
Energy Storage Systems ◽  
Continuous Growth

The continuous growth of renewable energy sources has drastically changed the paradigm of electric energy generation and distribution. Flywheel energy storage systems are a clean and efficient method to level supply and demand in energy grids, including those incorporating renewable energy generation. Environmental safety, resilience, high power capacity and quality make flywheel energy storage very promising. This paper contains a review of flywheel energy storage systems, already being in operation, and applications of flywheel energy storage in general.

Sign in / Sign up

Export Citation Format

Share Document