scholarly journals DETERMINATION OF HYGROEXPANSION COEFFICIENTS OF WOOD USING ANALYTICAL AND NUMERICAL HOMOGENIZATION

2018 ◽  
Vol 15 ◽  
pp. 51-56
Author(s):  
Lucie Kucíková ◽  
Michal Šejnoha ◽  
Jan Vorel
Keyword(s):  
Thermal Expansion ◽  
Moisture Content ◽  
Wood Density ◽  
Coefficient Of Thermal Expansion ◽  
Numerical Homogenization ◽  
Homogenization Procedure ◽  
Volume Fractions ◽  
Dry Wood ◽  
Hygroscopic Material

This paper is concerned with the determination of hygroexpansion coefficients of wood. Wood is a naturally hygroscopic material, attracting moisture from its surroundings. Its dimensions change depending on the actual moisture content. This dependence is characterized by the coefficient of hygroexpansion. For complex microstructures, this coefficient can be determined, similarly to the coefficient of thermal expansion, either from analytical or numerical homogenization. The homogenization procedure, used in this paper, comprises several steps corresponding to the wood structural composition. Accuracy of this approach is governed by correctness of the chosen input parameters. One of the most important parameters are the volume fractions of the earlywood and latewood. Ascertained dependence of the earlywood and latewood volume fractions on dry wood density is also presented.

Hygrothermal Behavior of Advanced Polymers Above Water Boiling Temperatures

2014 ◽  
Vol 136 (1) ◽  
Author(s):  
Changsoo Jang ◽  
Bongtae Han
Keyword(s):  
Thermal Expansion ◽  
Moisture Content ◽  
Coefficient Of Thermal Expansion ◽  
Measurement Data ◽  
Hybrid Procedure ◽  
Boiling Temperature ◽  
Hygrothermal Behavior ◽  
Expansion Behavior ◽  
Wide Range ◽  
Moisture Conditions

Hygroscopic and thermal expansion behavior of advanced polymers is investigated when subjected to combined high temperature and moisture conditions. An enhanced experimental–numerical hybrid procedure is proposed to overcome the limitations of the existing methods when used at temperatures above the water boiling temperature. The proposed procedure is implemented to measure the hygrothermal strains of three epoxy molding compounds and a no-filler underfill over a wide range of temperatures including temperatures beyond the water boiling temperature. The effects of moisture content on the glass transition temperature (Tg) and coefficient of thermal expansion (CTE) are evaluated from the measurement data. A formulation to predict the Tg change as a function of moisture content is also presented.

Determination of Mechanical Properties of Thin Film on Silicon Wafer

2003 ◽  
Author(s):  
Enboa Wu ◽  
Albert J. D. Yang ◽  
Ching-An Shao ◽  
C. S. Yen
Keyword(s):  
Thin Film ◽  
Mechanical Properties ◽  
Thermal Expansion ◽  
Young’S Modulus ◽  
Silicon Wafer ◽  
Coefficient Of Thermal Expansion ◽  
Young's Modulus ◽  
Poisson Ratio ◽  
Bulk State

Nondestructive determination of Young’s modulus, coefficient of thermal expansion, Poisson ratio, and thickness of a thin film has long been a difficult but important issue as the film of micrometer order thick might behave differently from that in the bulk state. In this paper, we have successfully demonstrated the capability of determining all these four parameters at one time. This novel method includes use of the digital phase-shifting reflection moire´ (DPRM) technique to record the slope of wafer warpage under temperature drop condition. In the experiment, 1-um thick aluminum was sputtered on a 6-in silicon wafer. The convolution relationship between the measured data and the mechanical properties was constructed numerically using the conventional 3D finite element code. The genetic algorithm (GA) was adopted as the searching tool for search of the optimal mechanical properties of the film. It was found that the determined data for Young’s modulus (E), Coefficient of Thermal Expansion (CTE), Poisson ratio (ν), and thickness (h) of the 1.00 um thick aluminum film were 104.2Gpa, 38.0 ppm/°C, 0.38, and 0.98 um, respectively, whereas that in the bulk state were measured to be E=71.4 Gpa, CTE=23.0 ppm/°C, and ν=0.34. The significantly larger values on the Young’s modulus and the coefficient of thermal expansion determined by this method might be attributed to the smaller dislocation density due to the thin dimension and formation of the 5-nm layer of Al2O3 formed on top of the 1-um thick sputtered film. The Young’s Modulus and the Poisson ratio of this nano-scale Al2O3 film were then determined. Their values are consistent with the physical intuition of the microstructure.

scholarly journals Determination of the linear coefficient of thermal expansion in polymer films at the nanoscale: influence of the composition of EVA copolymers and the molecular weight of PMMA

2015 ◽  
Vol 17 (28) ◽  
pp. 18495-18500 ◽  
Author(s):  
J. González-Benito ◽  
E. Castillo ◽  
J. F. Cruz-Caldito
Keyword(s):  
Molecular Weight ◽  
Thermal Expansion ◽  
Methyl Methacrylate ◽  
Polymer Films ◽  
Coefficient Of Thermal Expansion ◽  
Linear Coefficient ◽  
Poly Methyl Methacrylate ◽  
Poly Ethylene ◽  
Eva Copolymers

Nanothermal-expansion of poly(ethylene-co-vinylacetate), EVA, and poly(methyl methacrylate), PMMA, in the form of films was measured to finally obtain linear coefficients of thermal expansion, CTEs.

scholarly journals Determination of the coefficient of expansion of a carbon tube and its assembly for thermal compensation of metrological structures

2019 ◽  
Author(s):  
Salma EL ASMAI ◽  
François HENNEBELLE ◽  
Thierry COOREVITS ◽  
Jean-François FONTAINE
Keyword(s):  
Thermal Expansion ◽  
Composite Materials ◽  
Production Efficiency ◽  
Coefficient Of Thermal Expansion ◽  
Thermal Expansion Coefficients ◽  
Carbon Tube ◽  
Interesting Approach ◽  
Measurement Uncertainties ◽  
3D Metrology

Composite materials are increasingly used in 3D metrology devices. Their use is justified by their interesting mechanical properties including their low density and good rigidity but especially their low coefficient of thermal expansion. In fact, in order to improve production efficiency, companies nowadays integrate more and more control equipment directly in situ. These are then subject to thermal variations. The use of composite materials is an interesting approach. However, in some cases, the lack of knowledge of their coefficient of thermal expansion and their behavior might increase measurement uncertainties. The objective is to study the thermal behavior of a carbon tube alone and the same tube with aluminium fixing elements at its extremities, in order to determine the coefficients of expansion of the carbon alone and to quantify the influence of the fixation with aluminium elements. This experiment makes it possible to directly compensate the dimensional variations of the metrological structure depending on the temperature variations and thus to limit measurement uncertainties. The thermal expansion coefficients of the carbon tube and its assembly are determined by measuring relative variations in height with a ZERODUR® reference bar. The whole is positioned in a climatic chamber. *

Sign in / Sign up

Export Citation Format

Share Document