scholarly journals Impact of microphysics parameterization schemes in simulation of vardah cyclone using the advanced mesoscale weather research and forecasting model

2018 ◽  
Vol 7 (3.29) ◽  
pp. 272 ◽  
Author(s):  
P Janardhan Saikumar ◽  
T Ramashri
Keyword(s):  
Tropical Cyclone ◽  
Weather Prediction ◽  
Wrf Model ◽  
Numerical Weather Prediction Model ◽  
Horizontal Resolution ◽  
Cyclone Track ◽  
Microphysics Scheme ◽  
Parameterization Schemes ◽  
Single Moment ◽  
Indian Meteorological Department

The very severe Tropical Cyclone Vardah caused huge damage to property and life in south India during December 2016. The sensitivity of numerical simulations of the very severe tropical cyclone Vardah to different physics parameterization schemes is carried out to determine the best microphysics and cumulus physics parameterization schemes. The WRF Numerical weather prediction model configured with two nested domains. The horizontal resolution of domain-1is 27 km and domain-2 is 9 km. The tropical cyclone Vardah simulated track results were compared with the best track data given by the Indian Meteorological Department (IMD). WRF model Simulations were carried out using different microphysics (mp) parameterization schemes by fixing convective cumulus physics (cu) option to Grell-3D ensemble scheme and boundary layer option to updated Yonsei University scheme. The Vardah Cyclone track well simulated using WRF Single Moment-3 (WSM3) microphysics scheme in combination with G3D cumulus physics scheme. The cumulus physics and microphysics parameterization schemes influence the cyclone track prediction skill.  

scholarly journals Simulation of Severe Thunderstorms in Conjugation of Westerly and Easterly on 31 March 2019 in Bangladesh

2022 ◽  
Vol 12 (3) ◽  
pp. 29-43
Author(s):  
Samarendra Karmakar ◽  
Mohan Kumar Das ◽  
Md Quamrul Hassam ◽  
Md Abdul Mannan
Keyword(s):  
South Asian ◽  
Wrf Model ◽  
Horizontal Resolution ◽  
Weather Research And Forecasting ◽  
Atmospheric Conditions ◽  
Microphysics Scheme ◽  
Severe Thunderstorms ◽  
Synoptic Conditions ◽  
Pbl Scheme ◽  
Single Moment

The diagnostic and prognostic studies of thunderstorms/squalls are very important to save live and loss of properties. The present study aims at diagnose the different tropospheric parameters, instability and synoptic conditions associated the severe thunderstorms with squalls, which occurred at different places in Bangladesh on 31 March 2019. For prognostic purposes, the severe thunderstorms occurred on 31 March 2019 have been numerically simulated. In this regard, the Weather Research and Forecasting (WRF) model is used to predict different atmospheric conditions associated with the severe storms. The study domain is selected for 9 km horizontal resolution, which almost covers the south Asian region. Numerical experiments have been conducted with the combination of WRF single-moment 6 class (WSM6) microphysics scheme with Yonsei University (YSU) PBL scheme in simulation of the squall events. Model simulated results are compared with the available observations. The observed values of CAPE at Kolkata both at 0000 and 1200 UTC were 2680.4 and 3039.9 J kg-1 respectively on 31 March 2019 and are found to be comparable with the simulated values. The area averaged actual rainfall for 24 hrs is found is 22.4 mm, which complies with the simulated rainfall of 20-25 mm for 24 hrs. Journal of Engineering Science 12(3), 2021, 29-43

scholarly journals WRF-model sensitivity test and assimilation studies of Cempaka tropical cyclone

2021 ◽  
Vol 893 (1) ◽  
pp. 012029
Author(s):  
Fazrul Rafsanjani Sadarang ◽  
Fitria Puspita Sari
Keyword(s):  
Tropical Cyclone ◽  
Doppler Radar ◽  
Time Integration ◽  
Wrf Model ◽  
Radar Data ◽  
Control Model ◽  
Cyclone Track ◽  
Tropical Cyclone Track ◽  
Parameterization Schemes ◽  
Assimilation Scheme

Abstract The WRF model was used to forecast the most intensive stage of Cempaka Tropical Cyclone (TC) on 27 - 29 November 2017. This study evaluates the combination of cumulus and microphysics parameterization and the efficiency of assimilation method to predict pressure values at the center of the cyclone, maximum wind speed, and cyclone track. This study tested 18 combinations of cumulus and microphysics parameterization schemes to obtain the best combination of both parameterization schemes which later on called as control model (CTL). Afterward, assimilation schemes using 3DVAR cycles of 1, 3, 6 hours, and 4DVAR, namely RUC01, RUC03, RUC06, and 4DV, were evaluated for two domains with grid size of each 30 and 10 km. GFS data of 0.25-degree and the Yogyakarta Doppler Radar data were used as the initial data and assimilation data input, respectively. The result of the parameterization test shows that there is no combination of parameterization schemes that constantly outperform all variables. However, the combination of Kain-Fritsch and Thompson can produce the best prediction of tropical cyclone track compared to other combinations. While, the RUC03 assimilation scheme was noted as the most efficient method based on the accuracy of track prediction and duration of model time integration.

scholarly journals Impacts of Microphysics Schemes and Topography on the Prediction of the Heavy Rainfall in Western Myanmar Associated with Tropical Cyclone ROANU (2016)

2017 ◽  
Vol 2017 ◽  
pp. 1-22 ◽  
Author(s):  
Khin Win Maw ◽  
Jinzhong Min
Keyword(s):  
Tropical Cyclone ◽  
Heavy Rainfall ◽  
Wrf Model ◽  
Weather Research And Forecasting ◽  
Leeward Side ◽  
Microphysics Scheme ◽  
Maximum Rainfall ◽  
Skill Scores ◽  
Single Moment ◽  
Joint Typhoon Warning Center

The impacts of different microphysics and boundary schemes and terrain settings on the heavy rainfall over western Myanmar associated with the tropical cyclone (TC) ROANU (2016) are investigated using the Weather Research and Forecasting (WRF) model. The results show that the microphysics scheme of Purdue Lin (LIN) scheme produces the strongest cyclone. Six experiments with various combinations of microphysics and boundary schemes indicated that a combination of WRF Single-Moment 6-class (WSM6) scheme and Mellor-Yamada-Janjic (MYJ) best fits to the Joint Typhoon Warning Center (JTWC) data. WSM6-MYJ also performs the best for the track and intensity of rainfall and obtains the best statistics skill scores in the range of maximum rainfall intensity for 48-h. Sensitivity experiments on different terrain settings with Normal Rakhine Mountain (NRM), with Half of Rakhine Mountain (HRM), and Without Rakhine Mountain (WoRM) are designed with the use of WSM6-MYJ scheme. The track of TC ROANU moved northwestward in WoRM and HRM. Due to the presence of Rakhine Mountain, TC track moved into Myanmar and the peak rainfall occurred on the leeward side of the Mountain. In the absence of Rakhine Mountain, a shift in peak rainfall was observed in north side of the Mountain.

scholarly journals Evaluation of the WRF Model to Simulate a High-Intensity Rainfall Event over Kampala, Uganda

Water ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 873
Author(s):  
Yakob Umer ◽  
Janneke Ettema ◽  
Victor Jetten ◽  
Gert-Jan Steeneveld ◽  
Reinder Ronda
Keyword(s):  
High Intensity ◽  
Flood Hazard ◽  
Weather Prediction ◽  
Wrf Model ◽  
Numerical Weather Prediction Model ◽  
Rainfall Event ◽  
Weather Research And Forecasting ◽  
Event Triggering ◽  
Rain Events

Simulating high-intensity rainfall events that trigger local floods using a Numerical Weather Prediction model is challenging as rain-bearing systems are highly complex and localized. In this study, we analyze the performance of the Weather Research and Forecasting (WRF) model’s capability in simulating a high-intensity rainfall event using a variety of parameterization combinations over the Kampala catchment, Uganda. The study uses the high-intensity rainfall event that caused the local flood hazard on 25 June 2012 as a case study. The model capability to simulate the high-intensity rainfall event is performed for 24 simulations with a different combination of eight microphysics (MP), four cumulus (CP), and three planetary boundary layer (PBL) schemes. The model results are evaluated in terms of the total 24-h rainfall amount and its temporal and spatial distributions over the Kampala catchment using the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) analysis. Rainfall observations from two gauging stations and the CHIRPS satellite product served as benchmark. Based on the TOPSIS analysis, we find that the most successful combination consists of complex microphysics such as the Morrison 2-moment scheme combined with Grell-Freitas (GF) and ACM2 PBL with a good TOPSIS score. However, the WRF performance to simulate a high-intensity rainfall event that has triggered the local flood in parts of the catchment seems weak (i.e., 0.5, where the ideal score is 1). Although there is high spatial variability of the event with the high-intensity rainfall event triggering the localized floods simulated only in a few pockets of the catchment, it is remarkable to see that WRF is capable of producing this kind of event in the neighborhood of Kampala. This study confirms that the capability of the WRF model in producing high-intensity tropical rain events depends on the proper choice of parametrization combinations.

scholarly journals Verification of Forecast Weather Surface Variables over Vietnam Using the National Numerical Weather Prediction System

2016 ◽  
Vol 2016 ◽  
pp. 1-11 ◽  
Author(s):  
Tien Du Duc ◽  
Lars Robert Hole ◽  
Duc Tran Anh ◽  
Cuong Hoang Duc ◽  
Thuy Nguyen Ba
Keyword(s):  
Numerical Weather Prediction ◽  
Weather Prediction ◽  
Model Performance ◽  
Wrf Model ◽  
Horizontal Resolution ◽  
Prediction System ◽  
Regional Models ◽  
Global Spectral Model ◽  
Numerical Weather ◽  
The Us

The national numerical weather prediction system of Vietnam is presented and evaluated. The system is based on three main models, namely, the Japanese Global Spectral Model, the US Global Forecast System, and the US Weather Research and Forecasting (WRF) model. The global forecast products have been received at 0.25- and 0.5-degree horizontal resolution, respectively, and the WRF model has been run locally with 16 km horizontal resolution at the National Center for Hydro-Meteorological Forecasting using lateral conditions from GSM and GFS. The model performance is evaluated by comparing model output against observations of precipitation, wind speed, and temperature at 168 weather stations, with daily data from 2010 to 2014. In general, the global models provide more accurate forecasts than the regional models, probably due to the low horizontal resolution in the regional model. Also, the model performance is poorer for stations with altitudes greater than 500 meters above sea level (masl). For tropical cyclone performance validations, the maximum wind surface forecast from global and regional models is also verified against the best track of Joint Typhoon Warning Center. Finally, the model forecast skill during a recent extreme rain event in northeast Vietnam is evaluated.

scholarly journals Assessment of a Regional-Scale Weather Model for Hydrological Applications in South Korea

2016 ◽  
Vol 6 (2) ◽  
pp. 28
Author(s):  
Yong Jung ◽  
Yuh-Lang Lin
Keyword(s):  
Weather Prediction ◽  
Regional Scale ◽  
Wrf Model ◽  
Domain Size ◽  
Cumulus Parameterization ◽  
Precipitation Forecast ◽  
Mountainous Region ◽  
Parameterization Schemes ◽  
Plain Region ◽  
Cumulus Parameterization Schemes

<p class="1Body">In this study, a regional numerical weather prediction (NWP) model known as the Weather Research Forescasting (WRF) model was adopted to improve the quantitative precipitation forecasts (QPF) by optimizing combined microphysics and cumulus parameterization schemes. Four locations in two regions (plain region for Sangkeug and Imsil; mountainous region for Dongchun and Bunchun) in Korean Peninsula were examined for QPF for two heavy rainfall events 2006 and 2008. The maximum Index of Agreement (IOA) was 0.96 at Bunchun in 2006 using the combined Thompson microphysics and the Grell cumulus parameterization schemes. Sensitivity of QPF on domain size at Sangkeug indicated that the localized smaller domain had 55% (from 0.35 to 0.90) improved precipitation accuracy based on IOA of 2008. For the July 2006 Sangkeug event, the sensitivity to cumulus parameterization schemes for precipitation prediction cannot be ignored with finer resolutions. In mountainous region, the combined Thompson microphysics and Grell cumulus parameterization schemes make a better quantitative precipitation forecast, while in plain region, the combined Thompson microphysics and Kain-Frisch cumulus parameterization schemes are the best.</p>

Improvements to melting snow behavior in an NWP bulk microphysics scheme

2020 ◽  
Author(s):  
Emilie C. Iversen ◽  
Gregory Thompson ◽  
Bjørn Egil Nygaard
Keyword(s):  
Prediction Models ◽  
Weather Prediction ◽  
Wrf Model ◽  
Bimodal Distribution ◽  
Fall Velocity ◽  
Microphysics Scheme ◽  
Melting Snow ◽  
Melting Layer ◽  
Computational Performance ◽  
Fall Speed

&lt;p&gt;Snow falling into a melting layer will eventually consist of a fraction of meltwater and hence change its characteristics in terms of size, shape, density, fall speed and stickiness. Given that these characteristics contribute to determine the phase and amount of precipitation reaching the ground, precisely predicting such are important in order to obtain accurate weather forecasts for which society depends on. For example, in hydrological modelling precipitation phase at the surface is a first-order driver of hydrological processes in a water shed. Also, melting snow exerts a possible threat to critical infrastructure because the wet, sticky snow may adhere to the structures and form heavy ice sleeves.&lt;/p&gt;&lt;p&gt;Most widely used bulk microphysical parameterization schemes part of numerical weather prediction models represent only purely solid or liquid hydrometeors, and so melting particle characteristics are either ignored or represented by parent species with simple conditions for behavior in the melting layer. The Thompson microphysics scheme is explicitly developed for forecasting winter conditions in real-time as part of the WRF model, and to maintain computational performance, the introduction of additional prognostic variables is undesirable. This research aims at improving the Thompson scheme with respect to melting snow characteristics using a physically based approximation for the snowflake melted fraction, as well as a new definition of melting level and melting particle fall velocity. A real 3D WRF case is set up to compare with in-situ measurements of hydrometeor size and fall velocity from a disdrometer and a vertically pointing Doppler radar deployed during the Olympic Mountain Experiment (OLYMPEX). The modified microphysics scheme is able to replicate the bimodal distribution of fall speed &amp;#8211; diameter relations typical of mixed precipitation seen in disdrometer data, as well as the non-linear increase in snow fall speed with melted fraction through the melting layer.&lt;/p&gt;

scholarly journals Experimental Tropical Cyclone Forecasts Using a Variable-Resolution Global Model

2015 ◽  
Vol 143 (10) ◽  
pp. 4012-4037 ◽  
Author(s):  
Colin M. Zarzycki ◽  
Christiane Jablonowski
Keyword(s):  
High Resolution ◽  
Tropical Cyclone ◽  
Initial Conditions ◽  
Weather Prediction ◽  
Horizontal Resolution ◽  
Hurricane Sandy ◽  
Track Forecast ◽  
Time Step ◽  
Variable Resolution ◽  
The Impact

Abstract Tropical cyclone (TC) forecasts at 14-km horizontal resolution (0.125°) are completed using variable-resolution (V-R) grids within the Community Atmosphere Model (CAM). Forecasts are integrated twice daily from 1 August to 31 October for both 2012 and 2013, with a high-resolution nest centered over the North Atlantic and eastern Pacific Ocean basins. Using the CAM version 5 (CAM5) physical parameterization package, regional refinement is shown to significantly increase TC track forecast skill relative to unrefined grids (55 km, 0.5°). For typical TC forecast integration periods (approximately 1 week), V-R forecasts are able to nearly identically reproduce the flow field of a globally uniform high-resolution forecast. Simulated intensity is generally too strong for forecasts beyond 72 h. This intensity bias is robust regardless of whether the forecast is forced with observed or climatological sea surface temperatures and is not significantly mitigated in a suite of sensitivity simulations aimed at investigating the impact of model time step and CAM’s deep convection parameterization. Replacing components of the default physics with Cloud Layers Unified by Binormals (CLUBB) produces a statistically significant improvement in forecast intensity at longer lead times, although significant structural differences in forecasted TCs exist. CAM forecasts the recurvature of Hurricane Sandy into the northeastern United States 60 h earlier than the Global Forecast System (GFS) model using identical initial conditions, demonstrating the sensitivity of TC forecasts to model configuration. Computational costs associated with V-R simulations are dramatically decreased relative to globally uniform high-resolution simulations, demonstrating that variable-resolution techniques are a promising tool for future numerical weather prediction applications.

A study of the connection between tropical cyclone track and intensity errors in the WRF model

2013 ◽  
Vol 122 (1-2) ◽  
pp. 55-64 ◽  
Author(s):  
Du Duc Tien ◽  
Thanh Ngo-Duc ◽  
Hoang Thi Mai ◽  
Chanh Kieu
Keyword(s):  
Tropical Cyclone ◽  
Wrf Model ◽  
Cyclone Track ◽  
Tropical Cyclone Track
Sign in / Sign up

Export Citation Format

Share Document