scholarly journals SEISMIC DESIGN OF MASONRY-INFILLED FRAMES: A REVIEW OF CODIFIED APPROACHES

2020 ◽  
Vol 7 (2) ◽  
Author(s):  
Sonam Dorji ◽  
Hossein Derakhshan ◽  
Tatheer Zahra ◽  
David P. Thambiratnam ◽  
Alireza Mohyeddin
Keyword(s):  
Seismic Design ◽  
Paradigm Shift ◽  
Generic Model ◽  
Infilled Frames ◽  
Analysis And Design ◽  
High Stiffness ◽  
Equivalent Strut ◽  
Influencing Parameters ◽  
Modeling Strategy ◽  
Masonry Infilled Frames

This paper reviews the approach of eleven national codes on the analysis and design of masonry-infilled frames. It is shown that, in general, codes can be divided into two groups. The first group isolates the masonry and frame members by providing gaps to minimize the interaction between them. This method ensures that the complexities involved in analyzing the structure is avoided. However, the width of the gaps recommended is different for each of the codes. The second group takes advantage of the presence of high stiffness and strength masonry infill. In this technique, an equivalent-strut modeling strategy is mostly recommended. It is shown that the strut model suggested in each of the codes is different. An attempt to obtain a generic model for masonry-infilled frame failed largely due to the existence of many behavior-influencing parameters. Finally, it is suggested to have a paradigm shift in the modeling strategy where the masonry-infilled frames are classified into different categories and a model is suggested for each of them.

scholarly journals Seismic design and analysis of masonry-infilled frames

1995 ◽  
Vol 22 (3) ◽  
pp. 576-587 ◽  
Author(s):  
V. K. R. Kodur ◽  
M. A. Erki ◽  
J. H. P. Quenneville
Keyword(s):  
Seismic Design ◽  
Analytical Procedure ◽  
Dynamic Properties ◽  
Damping Ratio ◽  
Seismic Loading ◽  
Infilled Frames ◽  
Design Spectrum ◽  
Infilled Frame ◽  
Beneficial Effects ◽  
Masonry Infilled Frames

A simple analytical procedure, which can be used by practicing engineers, for the seismic design of masonry-infilled frames is presented. The analysis procedure, based on the experimental and analytical studies reported in the literature, accounts for the effect of infills in all three stages, namely, in computing seismic loading, in predicting response of the infilled frame, and in determining the strength of the infilled frame. Seismic loading is computed using the dynamic properties of the structure rather than arbitrary empirical relationships as recommended in design codes. Recommendations regarding the choice of infilled frame idealization, structural damping ratio, earthquake design spectrum, structural irregularity, and computational aids are made. Practical guidelines, which can be implemented during the construction phase and which have beneficial effects on the behaviour of infilled frames, are provided. Application of the proposed analytical procedure in a design situation is demonstrated through a numerical example, and it is shown that infills can be accounted for in the seismic design of frames during the normal course of design. Key words: masonry, infilled panels, frame behaviour, seismic design.

Study of Seismic Design Method for Slope Supporting Structure of Soil Nailing

2013 ◽  
Vol 353-356 ◽  
pp. 2073-2078
Author(s):  
Tian Zhong Ma ◽  
Yan Peng Zhu ◽  
Chun Jing Lai ◽  
De Ju Meng
Keyword(s):  
Seismic Design ◽  
Calculation Method ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Calculation Model ◽  
Soil Nailing ◽  
Case Record ◽  
Analysis And Design ◽  
Supporting Structure ◽  
Earthquake Action

Slope anchorage structure of soil nail is a kind of economic and effective flexible slope supporting structure. This structure at present is widely used in China. The supporting structure belong to permanent slope anchorage structure, so the design must consider earthquake action. Its methods of dynamical analysis and seismic design can not be found for the time being. The seismic design theory and method of traditional rigidity retaining wall have not competent for this new type of flexible supporting structure analysis and design. Because the acceleration along the slope height has amplification effect under horizontal earthquake action, errors should be induced in calculating earthquake earth pressure using the constant acceleration along the slope height. Considering the linear change of the acceleration along the slope height and unstable soil with the fortification intensity the influence of the peak acceleration, the earthquake earth pressure calculation formula is deduced. The soil nailing slope anchorage structure seismic dynamic calculation model is established and the analytical solutions are obtained. The seismic design and calculation method are given. Finally this method is applied to a case record for illustration of its capability. The results show that soil nailing slope anchorage structure has good aseismic performance, the calculation method of soil nailing slope anchorage structure seismic design is simple, practical, effective. The calculation model provides theory basis for the soil nailing slope anchorage structure of seismic design. Key words: soil nailing; slope; earthquake action; seismic design;

Evolution of seismic design codes of highway bridges in Chile

2021 ◽  
pp. 875529302098801
Author(s):  
José Wilches ◽  
Hernán Santa Maria ◽  
Roberto Leon ◽  
Rafael Riddell ◽  
Matías Hube ◽  
...  
Keyword(s):  
Seismic Design ◽  
Failure Modes ◽  
Highway Bridges ◽  
Design Codes ◽  
Seismic Codes ◽  
Analysis And Design ◽  
Residual Displacements ◽  
Shear Keys ◽  
Maule Earthquake ◽  
2010 Maule Earthquake

Chile, as a country with a long history of strong seismicity, has a record of both a constant upgrading of its seismic design codes and structural systems, particularly for bridges, as a result of major earthquakes. Recent earthquakes in Chile have produced extensive damage to highway bridges, such as deck collapses, large transverse residual displacements, yielding and failure of shear keys, and unseating of the main girders, demonstrating that bridges are highly vulnerable structures. Much of this damage can be attributed to construction problems and poor detailing guidelines in design codes. After the 2010 Maule earthquake, new structural design criteria were incorporated for the seismic design of bridges in Chile. The most significant change was that a site coefficient was included for the estimation of the seismic design forces in the shear keys, seismic bars, and diaphragms. This article first traces the historical development of earthquakes and construction systems in Chile to provide a context for the evolution of Chilean seismic codes. It then describes the seismic performance of highway bridges during the 2010 Maule earthquake, including the description of the main failure modes observed in bridges. Finally, this article provides a comparison of the Chilean bridge seismic code against the Japanese and United States codes, considering that these codes have a great influence on the seismic codes for Chilean bridges. The article demonstrates that bridge design and construction practices in Chile have evolved substantially in their requirements for the analysis and design of structural elements, such as in the definition of the seismic hazard to be considered, tending toward more conservative approaches in an effort to improve structural performance and reliability for Chilean bridges.

Implementing the performance-based seismic design for new reinforced concrete structures: Comparison among ASCE/SEI 41, TBI, and LATBSDC

2021 ◽  
pp. 875529302098196
Author(s):  
Siamak Sattar ◽  
Anne Hulsey ◽  
Garrett Hagen ◽  
Farzad Naeim ◽  
Steven McCabe
Keyword(s):  
Reinforced Concrete ◽  
Los Angeles ◽  
Seismic Design ◽  
Common Ground ◽  
Seismic Analysis ◽  
Tall Buildings ◽  
The United States ◽  
Analysis And Design ◽  
Performance Based Seismic Design ◽  
New Buildings

Performance-based seismic design (PBSD) has been recognized as a framework for designing new buildings in the United States in recent years. Various guidelines and standards have been developed to codify and document the implementation of PBSD, including “ Seismic Evaluation and Retrofit of Existing Buildings” (ASCE 41-17), the Tall Buildings Initiative’s Guidelines for Performance-Based Seismic Design of Tall Buildings (TBI Guidelines), and the Los Angeles Tall Buildings Structural Design Council’s An Alternative Procedure for Seismic Analysis and Design of Tall Buildings Located in the Los Angeles Region (LATBSDC Procedure). The main goal of these documents is to regularize the implementation of PBSD for practicing engineers. These documents were developed independently with experts from varying backgrounds and organizations and consequently have differences in several degrees from basic intent to the details of the implementation. As the main objective of PBSD is to ensure a specified building performance, these documents would be expected to provide similar recommendations for achieving a given performance objective for new buildings. This article provides a detailed comparison among each document’s implementation of PBSD for reinforced concrete buildings, with the goal of highlighting the differences among these documents and identifying provisions in which the designed building may achieve varied performance depending on the chosen standard/guideline. This comparison can help committees developing these documents to be aware of their differences, investigate the sources of their divergence, and bring these documents closer to common ground in future cycles.

Experimental Out-Of-Plane Behavior of Brick Masonry Infilled Frames

2018 ◽  
Vol 14 (2) ◽  
pp. 221-237 ◽  
Author(s):  
Farhad Akhoundi ◽  
Graça Vasconcelos ◽  
Paulo Lourenço
Keyword(s):  
Brick Masonry ◽  
Infilled Frames ◽  
Out Of Plane ◽  
Masonry Infilled Frames

scholarly journals Masonry infilled frames – contemporary structural concepts

2021 ◽  
pp. 291-297
Author(s):  
I. Radić ◽  
T. Dokšanović ◽  
D. Markulak ◽  
B. Pervan
Keyword(s):  
Infilled Frames ◽  
Masonry Infilled Frames
Sign in / Sign up

Export Citation Format

Share Document