scholarly journals Finite Element Analysis of Multistage Hot Forging Process During Mold Cooling

2020 ◽  
Vol 19 (5) ◽  
pp. 75-81 ◽  
Author(s):  
Du-Soon Choi ◽  
◽  
Hyoungboo Kang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Hot Forging ◽  
Element Analysis ◽  
Forging Process ◽  
Hot Forging Process

Forging Process Analysis of 6061 Aluminum Alloy Motorcycle Brake Parts

2021 ◽  
Vol 901 ◽  
pp. 176-181
Author(s):  
Tung Sheng Yang ◽  
Chieh Chang ◽  
Ting Fu Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Aluminum Alloy ◽  
Metal Forming ◽  
Process Analysis ◽  
Surface Hardness ◽  
Dimensional Accuracy ◽  
Die Design ◽  
Element Analysis ◽  
Forging Process

This paper used finite element analysis of metal forming to study the forging process and die design of aluminum alloy brake parts. According to the process parameters and die design, the brake parts were forged by experiment. First, the die design is based on the product size and considering parting line, draft angle, forging tolerance, shrinkage and scrap. Secondly, the finite element analysis of metal forming is used to simulate the forging process of aluminum alloy brake parts. Finally, the aluminum alloy brake levers with dimensional accuracy and surface hardness were forged.

Finite Element Analysis of the Forging Process for Half-Shaft Bushing

2009 ◽  
Vol 16-19 ◽  
pp. 1248-1252
Author(s):  
Chun Dong Zhu ◽  
Man Chun Zhang ◽  
Lin Hua
Keyword(s):  
Finite Element Method ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Numerical Calculation ◽  
Two Dimensional ◽  
Element Analysis ◽  
Forging Process ◽  
Die Life ◽  
Dimensional Finite Element ◽  
Forging Force

As an important forged part of an automobile, the inner hole of the half-shaft bushing must be formed directly. However, the process requires many steps, and how the forging, or deformation, is spread over the production steps directly affects the die life and forging force required. In this paper, the three steps involved in directly forging a half shaft bushing's inner hole are simulated using the two-dimensional finite element method. Further more, we improve the forging process. From numerical calculation, the improved necessary forging force is found to be only half the original force, and the die life is doubled.

Hot Forging Process Design and Initial Billet Size Optimization for Manufacturing of the Talar Body Prosthesis by Finite Element Modeling

2021 ◽  
Author(s):  
Panuwat Soranansri ◽  
Tanaporn Rojhirunsakool ◽  
Narongsak Nithipratheep ◽  
Chackapan Ngaouwnthong ◽  
Kraisuk Boonpradit ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Modeling ◽  
Process Design ◽  
Hot Forging ◽  
Optimum Size ◽  
Mass Ratio ◽  
Forging Process ◽  
Initial Billet ◽  
Material Utilization ◽  
Hot Forging Process

In hot forging industry, the process design and the billet size determination are very crucial steps because those steps directly influence both the product quality and material utilization. The purpose of this paper was to propose a technique used to design the hot forging process for the manufacturing of the talar body prosthesis. The talar body prosthesis is one of the artificial bones, which its geometry is a free form shape. In this study, the Finite Element Modeling (FEM) was used as a tool to verify the proposed design before implementation in a production line. In addition, an initial billet was determined the optimum size in the FEM by varying the mass ratio factor, the diameter, and the length. It was found that the mass ratio factor is a very useful guideline since the optimum size is quite close to the provided size from the guideline. The FEM results showed that the dimensions of the initial billet significantly affect the complete metal filling in the die cavity. Moreover, the optimum size between the diameter and length can reduce the material waste in the hot forging process of the talar body prosthesis. Finally, the experimental results of the hot forging process showed that the proposed process design with the optimum size of the initial billet is achieved in order to manufacture the talar body prosthesis and the material utilization of the new proposed process is improved from the traditional process by 2.6 times.

Study on Cylindrical Heatsink Forging Process Considering Friction Condition

2019 ◽  
Vol 823 ◽  
pp. 141-144
Author(s):  
Tung Sheng Yang ◽  
Yong Nan Chen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Friction Factor ◽  
Testing Machine ◽  
Metal Flow ◽  
Compression Tests ◽  
Stress Strain ◽  
Element Analysis ◽  
Forging Process ◽  
Different Temperatures

The feasibility of forging of AL-1050 alloy of cylindrical heatsink under warm conditions is demonstrated in the present work. The stress-strain curves and friction factor play an important role in the cylindrical heatsink forging. The purpose of forging lubrication is to reduce friction between blank and die, and to decrease resistance of metal flow to die. The stress-strain curves at different temperatures are obtained by compressing tests. The friction factor between 1050 aluminum alloy and die material are determined at different temperatures by ring compression tests with graphite lubricants. The compressing and ring compressing tests are carried out by using the computerized screw universal testing machine. The finite element method is used to investigate the forming characters of the forging process. To verify the prediction of FEM simulation in the cylindrical heatsink forging process, the experimental parameters such as stress-strain curves and fiction factor, are as the input data during analysis. Maximum forging load and effective stress distribution are determined of the heatsink forging, using the finite element analysis. Finally, the cylindrical heatsink parts are formed by the forging machine under the conditions using finite element analysis.

Sign in / Sign up

Export Citation Format

Share Document