IMC-based anti-windup controller for real-time hot air flow and level control loop

2022 ◽  
Vol 16 (2) ◽  
pp. 205
Author(s):  
Rajani K. Mudi ◽  
Ujjwal Manikya Nath ◽  
Chanchal Dey
1991 ◽  
Vol 29 (1) ◽  
pp. 98-101 ◽  
Author(s):  
G. McCurrach ◽  
A. L. Evans ◽  
D. C. Smith ◽  
M. T. Gordon ◽  
M. B. D. Cooke

Sensors ◽  
2021 ◽  
Vol 21 (5) ◽  
pp. 1924
Author(s):  
Patrick Seeling ◽  
Martin Reisslein ◽  
Frank H. P. Fitzek

The Tactile Internet will require ultra-low latencies for combining machines and humans in systems where humans are in the control loop. Real-time and perceptual coding in these systems commonly require content-specific approaches. We present a generic approach based on deliberately reduced number accuracy and evaluate the trade-off between savings achieved and errors introduced with real-world data for kinesthetic movement and tele-surgery. Our combination of bitplane-level accuracy adaptability with perceptual threshold-based limits allows for great flexibility in broad application scenarios. Combining the attainable savings with the relatively small introduced errors enables the optimal selection of a working point for the method in actual implementations.


2015 ◽  
Author(s):  
Nic van Vuuren ◽  
Gabriele Brizi ◽  
Giacomo Buitoni ◽  
Lucio Postrioti ◽  
Carmine Ungaro
Keyword(s):  
Air Flow ◽  

2015 ◽  
Vol 8 (S2) ◽  
pp. 40 ◽  
Author(s):  
C. Dinesh ◽  
V. V. Manikanta ◽  
H. S. Rohini ◽  
K. R. Prabhu

2014 ◽  
Vol 627 ◽  
pp. 153-157
Author(s):  
Nawadee Srisiriwat ◽  
Chananchai Wutthithanyawat

The temperature distribution of hot air flow in heating zone of a rectangular duct has been investigated for drying application. The experimental set-up consists of a heater and a fan to generate the hot air flow in the range of temperature from 40 to 100°C and the range of air velocity between 1.20 and 1.57 m/s. An increase of the heater power supply increases the hot air temperature in the heating zone while an increase of air velocity forced by fan decreases the initial temperature at the same power supply provided to generate the hot air flow. The temperature distribution shows that the hot air temperature after transferring through air duct decreases with an increase of the length of the rectangular duct. These results are very important for the air flow temperature and velocity control strategy to apply for heating zone design in the drying process.


2015 ◽  
Vol 772 ◽  
pp. 147-153
Author(s):  
Mohamed Amir Gabir Elbakri

Concentration process is commonly process in industries for chemicals and products that want to reach desired amount of matter in product, so concentration process control is important to reach the desired concentrate of product.Concentration in streams are affected by physical variables around it like pressure, temperature and amount of matter that solvent in streams, so the amplitude of concentration is randomly change with time that make control process not easy.In this project controller was designed for concentration process and was implemented in real-time system that constructed to verify the response of controller, in prototype concentrated solutions-juice and sugar-used to control in it separately with water then mixed to produce juice with desired property.The Mathematical model of concentrated process was evolved and Matlab used to analyze and design control loop for these model, control algorithms used as PID & Fuzzy logic controller to build controller that achieve the specification requirements of a system process.The Fuzzy PI-controller designed to control that for characteristic of nonlinearity of real-time system, and implement simulation of control loops in LABVIEW software with appropriate interface.The DAQ hardware with LABVIEW software are used to implement the control loop that designed for real-time prototype to produce the juice with desired concentrated.


Sign in / Sign up

Export Citation Format

Share Document