Chemical Composition and Selected Energy Properties of Black Locust Bark (Robinia pseudoacacia L.)

2016 ◽  
Vol 20 (2) ◽  
pp. 117-124
Author(s):  
Artur Kraszkiewicz
Keyword(s):  
Black Locust ◽  
Robinia Pseudoacacia ◽  
Chemical Properties ◽  
Calorific Value ◽  
Average Density ◽  
Ash Content ◽  
Poplar Wood ◽  
Average Value ◽  
Robinia Pseudoacacia L

AbstractThe objective of the paper was to assess the usefulness of bark of black locust trunks as an energy source based on chemical and energy properties. Material for research was collected from five forest stands of black locust (Robinia pseudoacacia L.). After determination of the bark mass, its participation in the mass of trees, the content of moisture in bark, density, calorific value, ash, content of C, H, N, S, K and P were established. In comparison to wood, bark has worse chemical properties on account of a high content of sulphur and nitrogen. In the conditions of research, black locust bark had an average density of approx. 400 kg·m−3 which is comparable to the willow and poplar wood. Average calorific value of black locust bark was by 10% higher than the average value of this parameter for bark wood.

scholarly journals KUALITAS BIOPELLET LIMBAH SEKAM PADI (Oryza sativa) SEBAGAI SALAH SATU SOLUSI DALAM MENGHADAPI KRISIS ENERGI

2021 ◽  
Vol 9 (2) ◽  
pp. 412
Author(s):  
Diana Ulfa ◽  
Lusyiani Lusyiani ◽  
Gusti A.R. Thamrin
Keyword(s):  
Moisture Content ◽  
Carbon Content ◽  
Rice Husk ◽  
Calorific Value ◽  
Forest Products ◽  
Average Density ◽  
Ash Content ◽  
Raw Material ◽  
Heating Value ◽  
Average Value

The purposes of this study were: 1) To analyze the characteristics of rice husk waste biopellets such as moisture content, density, ash content, flight substance content, calorific value and bound carbon content, 2) To identify the factors that influence the production of biopellets from rice husk waste. This study used a completely randomized design model with 2 (two) factors, namely variations in mesh size and variations of adhesive with 3 (three) replications. Making biopellet samples and testing the characteristics of rice husk biopellets were carried out at the Forest Products Technology Laboratory, Faculty of Forestry, Lambung Mangkurat University, Banjarbaru. The size of the powder and the amount of added adhesive as well as the interaction between the two did not have a significant effect on the value of moisture content, density, ash content, flight substance content and bonded carbon content, but had a very significant effect on heating value. The average value of moisture content ranged from 13.0771 - 14.5932%, the average density value ranged from 0.7698 g/cm3- 0.9548 g/cm3, the average value of the resulting ash content ranged from 16.5233% - 19.9633%, the average value of flying substances ranged from 57.3533% - 63.6067%, the average value of bound carbon was 6.3462% - 8.7668%, and the average heating value ranged from 2781.3800 cal/g - 3378.4600 cal/g. The factors that affect the quality of the biopelet are the process of pretreating the raw material, refining the size and mixing the adhesive.

Energetic properties of peat saturated with petroleum products

2020 ◽  
Vol 13 (2) ◽  
pp. 105-109
Author(s):  
E. S. Dremicheva
Keyword(s):  
Crude Oil ◽  
Diesel Fuel ◽  
Energy Use ◽  
Experimental Studies ◽  
Calorific Value ◽  
Petroleum Products ◽  
Ash Content ◽  
Motor Oil ◽  
Initial Sample

This paper presents a method of sorption using peat for elimination of emergency spills of crude oil and petroleum products and the possibility of energy use of oil-saturated peat. The results of assessment of the sorbent capacity of peat are presented, with waste motor oil and diesel fuel chosen as petroleum products. Natural peat has been found to possess sorption properties in relation to petroleum products. The sorbent capacity of peat can be observed from the first minutes of contact with motor oil and diesel fuel, and significantly depends on their viscosity. For the evaluation of thermal properties of peat saturated with petroleum products, experimental studies have been conducted on determination of moisture and ash content of as-fired fuel. It is shown that adsorbed oil increases the moisture and ash content of peat in comparison with the initial sample. Therefore, when intended for energy use, peat saturated with petroleum products is to be subjected to additional drying. Simulation of net calorific value has been performed based on the calorific values of peat and petroleum products with different ratios of petroleum product content in peat and for a saturated peat sample. The obtained results are compared with those of experiments conducted in a calorimetric bomb and recalculated for net calorific value. A satisfactory discrepancy is obtained, which amounts to about 12%. Options have been considered providing for combustion of saturated peat as fuel (burnt per se and combined with a solid fuel) and processing it to produce liquid, gaseous and solid fuels. Peat can be used to solve environmental problems of elimination of emergency spills of crude oil and petroleum products and as an additional resource in solving the problem of finding affordable energy.

scholarly journals Propagation from root cuttings for black locust (Robinia pseudoacacia L.) improvement in Hungary: a review

2019 ◽  
Vol 25 (1-2) ◽  
Author(s):  
Zs. Keserű ◽  
K. Rédei ◽  
J. Rásó ◽  
T. Kiss
Keyword(s):  
Genetic Variation ◽  
Forest Management ◽  
Black Locust ◽  
Robinia Pseudoacacia ◽  
Clonal Forestry ◽  
Wood Production ◽  
The World ◽  
More Care ◽  
Improved Cultivars ◽  
Robinia Pseudoacacia L

Black locust (Robinia pseudoacacia L.) is a valuable stand-forming tree species introduced to Europe approximately 400 years ago from North America. Today it is widely planted throughout the world, first of all for wood production. In Hungary, where black locust has great importance in the forest management, it is mainly propagated by seeds. But since the seed-raised plants present a great genetic variation, this type of propagation can not be used for Robinia’s improved cultivars. In the Hungarian black locust clonal forestry, propagation from root cuttings can be used for reproduction of superior individuals or cultivars in large quantities. However, this method demands more care than raising seedlings from seeds and can be applied with success in well-equipped nurseries.

scholarly journals Productivity of black locust (Robinia pseudoacacia L.) stands on chernozem in Vojvodina

2014 ◽  
pp. 9-31
Author(s):  
Sinisa Andrasev ◽  
Savo Roncevic ◽  
Petar Ivanisevic ◽  
Sasa Pekec ◽  
Martin Bobinac
Keyword(s):  
Soil Type ◽  
Black Locust ◽  
Robinia Pseudoacacia ◽  
Diameter Growth ◽  
Sample Plot ◽  
Considerable Variability ◽  
Aeolian Sand ◽  
Breast Height ◽  
The Mean ◽  
Robinia Pseudoacacia L

This paper presents the elements of growth of black locust trees and stands in 15 sample plots in Vojvodina, at the age of 21-68 years. In each sample plot, based on soil profile horizons the determined soil type was chernozem as well as its lower systematic units (subtype, variety and form), according to the Skoric et al. (1985) classification. On the basis of the mean stand heights (hL), the stands on the subtype of chernozem on loess and loesslike sediments belong to height classes I-IV, and stands on calcareous aeolian sand to classes II-V (according to R e d e i et al. 2014), which indicates their considerable variability with respect to productivity within the determined subtypes of chernozem. Significant differences at the level of chernozem subtypes were found between the mean heights (p = 0.032), but not between the mean diameters (p = 0.083). The mean diameters at breast height in the studied black locust stands were on average lower than the models of diameter growth for the appropriate height classes and determined by a larger number of trees per hectare than in the tables (R e d e i et al, 2014). The volume per hectare is higher than in the tables also being conditioned by the large number of trees per hectare.

scholarly journals The Synergy of Arbuscular Mycorrhizal Fungi and Exogenous Abscisic Acid Benefits Robinia pseudoacacia L. Growth through Altering the Distribution of Zn and Endogenous Abscisic Acid

2021 ◽  
Vol 7 (8) ◽  
pp. 671
Author(s):  
Xiao Lou ◽  
Xiangyu Zhang ◽  
Yu Zhang ◽  
Ming Tang
Keyword(s):  
Abscisic Acid ◽  
Mycorrhizal Fungi ◽  
Black Locust ◽  
Robinia Pseudoacacia ◽  
Arbuscular Mycorrhizal ◽  
Am Fungi ◽  
Am Symbiosis ◽  
Antioxidant Defense Systems ◽  
Robinia Pseudoacacia L ◽  
Zn Stress

The simultaneous effects of arbuscular mycorrhizal (AM) fungi and abscisic acid (ABA) on the tolerance of plants to heavy metal (HM) remain unclear. A pot experiment was carried out to clarify the effects of simultaneous applications of AM fungi and ABA on plant growth, Zn accumulation, endogenous ABA contents, proline metabolism, and the oxidative injury of black locust (Robinia pseudoacacia L.) exposed to excess Zn stress. The results suggested that exogenously applied ABA positively enhanced AM colonization, and that the growth of plants only with AM fungi was improved by ABA application. Under Zn stress, AM inoculation and ABA application increased the ABA content in the root/leaf (increased by 48–172% and 92%, respectively) and Zn content in the root/shoot (increased by 63–152% and 61%, respectively) in AM plants, but no similar trends were observed in NM plants. Additionally, exogenous ABA addition increased the proline contents of NM roots concomitantly with the activities of the related synthases, whereas it reduced the proline contents and the activity of Δ1-pyrroline-5-carboxylate synthetase in AM roots. Under Zn stress, AM inoculation and ABA application decreased H2O2 contents and the production rate of O2, to varying degrees. Furthermore, in the roots exposed to Zn stress, AM inoculation augmented the activities of SOD, CAT, POD and APX, and exogenously applied ABA increased the activities of SOD and POD. Overall, AM inoculation combined with ABA application might be beneficial to the survival of black locust under Zn stress by improving AM symbiosis, inhibiting the transport of Zn from the roots to the shoots, increasing the distribution of ABA in roots, and stimulating antioxidant defense systems.

scholarly journals Black Locust (Robinia pseudoacacia L.) Root Cuttings: Diversity and Identity Revealed by SSR Genotyping: A Case Study

2015 ◽  
Vol 6 (2) ◽  
pp. 201-217 ◽  
Author(s):  
Maria Emilia Malvolti ◽  
Irene Olimpieri ◽  
Paola Pollegioni ◽  
Klára Cseke ◽  
Zsolt Keserű ◽  
...  
Keyword(s):  
Black Locust ◽  
Robinia Pseudoacacia ◽  
Ssr Genotyping ◽  
Robinia Pseudoacacia L

scholarly journals Damage to black locust leaves (Robinia pseudoacacia L.) by the black locust gall midge (Obolodiplosis robiniae) (Haldeman, 1847) in the Włoszczowa-Jędrzejów Protected Landscape Area - research on strengthening and developing knowledge and awareness in environmental education

2022 ◽  
Vol 0 (0) ◽  
Author(s):  
Jolanta Bąk-Badowska ◽  
Ilona Żeber-Dzikowska ◽  
Barbara Wodecka ◽  
Mariusz Gietka ◽  
Jarosław Chmielewski
Keyword(s):  
Nature Conservation ◽  
Environmental Education ◽  
Black Locust ◽  
Gall Midge ◽  
Robinia Pseudoacacia ◽  
Academic Community ◽  
Anthropogenic Factors ◽  
Research Areas ◽  
Robinia Pseudoacacia L ◽  
Developing Knowledge

Abstract The prepared article by the team of authors aims to show research in the field of strengthening and developing knowledge and awareness from environmental education in the community of nature conservation services and the academic community. This paper is the result of research conducted in 2014–2015, in the Włoszczowa-Jędrzejów Protected Landscape Area, in the Świętokrzyskie Province. The material for the study was acacia robinia (Robinia pseudoacacia L.) leaves collected on two research areas, differentiated due to the influence of anthropogenic factors. As a result of the study, 5,000 black locust leaves were collected, 65% of which were found to be damaged. Research stands under the influence of strong anthropopressure were characterised by a higher number of lesions on leaves.

Sign in / Sign up

Export Citation Format

Share Document