scholarly journals Characterizing Seismo-stratigraphic and Structural Framework of Late Cretaceous-Recent succession of offshore Indus Pakistan

2018 ◽  
Vol 10 (1) ◽  
pp. 174-191 ◽  
Author(s):  
Majid Khan ◽  
Yike Liu ◽  
Asam Farid ◽  
Muhammad Owais
Keyword(s):  
Seismic Data ◽  
Late Eocene ◽  
Indian Plate ◽  
Processing Scheme ◽  
Structural Growth ◽  
Seismic Records ◽  
Exploratory Wells ◽  
Well Data ◽  
Seismic Reflection Profiles ◽  
Push Up

Abstract Regional seismic reflection profiles and deep exploratory wells have been used to characterize the subsurface structural trends and seismo-stratigraphic architecture of the sedimentary successions in offshore Indus Pakistan. To improve the data quality, we have reprocessed the seismic data by applying signal processing scheme to enhance the reflection continuity for obtaining better results. Synthetic seismograms have been used to identify and tie the seismic reflections to the well data. The seismic data revealed tectonically controlled, distinct episodes of normal faulting representing rifting during Mesozoic and transpression at Late Eocene time. A SW-NE oriented anticlinal type push up structure is observed resulted from the basement reactivation and recent transpression along Indian Plate margin. The structural growth of this particular pushup geometry was computed. Six mappable seismic sequences have been identified on seismic records. In general, geological formations are at shallow depths towards northwest due to basement blocks uplift. A paleoshelf is also identified on seismic records overlain by Cretaceous sediments, which is indicative of Indian-African Plates rifting at Jurassic time. The seismic interpretation reveals that the structural styles and stratigraphy of the region were significantly affected by the northward drift of the Indian Plate, post-rifting, and sedimentation along its western margin during Middle Cenozoic. A considerable structural growth along the push up geometry indicates present day transpression in the margin sediments. The present comprehensive interpretation can help in understanding the complex structures in passive continental margins worldwide that display similar characteristics but are considered to be dominated by rifting and drifting tectonics.

Shallow Deformation Along the Crittenden County Fault Zone Near the Southeastern Boundary of the Reelfoot Rift, Northeast Arkansas

1992 ◽  
Vol 63 (3) ◽  
pp. 263-275 ◽  
Author(s):  
E. A. Luzietti ◽  
L. R. Kanter ◽  
E. S. Schweig ◽  
K. M. Shedlock ◽  
R. B. VanArsdale
Keyword(s):  
Fault Zone ◽  
Seismic Reflection ◽  
Vertical Displacement ◽  
Surface Expression ◽  
Late Eocene ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Structural Relief ◽  
Well Data ◽  
Seismic Reflection Profiles

Abstract The Crittenden County fault zone (CCFZ) is located near the southeast boundary of the Reelfoot rift in northeastern Arkansas. The southeastern boundary of the rift has been characterized as an 8-km-wide zone of down-to-the-northwest displacement. The CCFZ, however, shows significant down-to-the-southeast reverse faulting of Paleozoic and Cretaceous rocks and flexure and thinning within the Tertiary sedimentary section. We discuss four of nine Mini-Sosie seismic reflection profiles, each 1 to 2 km long, acquired over the surface projection of the CCFZ and Reelfoot rift boundary. One second of two-way traveltime data was recorded, which corresponds to a maximum depth of approximately 1.2 km. Sedimentary layers between 50 and 800 m are well imaged; deeper strata are evident but not well imaged. Well data at one site on the CCFZ indicate approximately 63 and 82 m of vertical displacement of Cretaceous and Paleozoic rocks, respectively. Proprietary seismic-reflection data show reverse displacement of these rock units, indicating compressional tectonics. From the Mini-Sosie profiles, we estimate structural relief across the CCFZ at the Paleocene (Fort Pillow Sand) level to range between 14 and 70 m. The overlying middle-to-late Eocene section shows a similar or slightly smaller amount of thinning, indicating that much of the movement on the CCFZ dates mid-to-late Eocene. Displacement, flexure, and thinning in the geologic section increases as the CCFZ converges with the Reelfoot rift boundary, in the southwest part of the area studied. Surface expression of the CCFZ has not been identified. Reflections from the Quaternary-Eocene unconformity, however, show warping, dip, or interruptions in places over the CCFZ, suggesting that the CCFZ may have experienced Quaternary or Holocene movement as well.

The stratigraphy and structure of the Laurentian Cone region

1979 ◽  
Vol 16 (9) ◽  
pp. 1726-1752 ◽  
Author(s):  
Elazar Uchupi ◽  
James A. Austin Jr.
Keyword(s):  
Late Eocene ◽  
Climatic Conditions ◽  
Early Jurassic ◽  
Turbidity Currents ◽  
Sea Floor ◽  
Grand Banks ◽  
Oceanic Basement ◽  
Well Data ◽  
Seismic Reflection Profiles ◽  
Continental Glaciation

A series of single and multichannel seismic reflection profiles combined with well data from the adjacent shelves and deep sea and published geophysical profiles permit the reconstruction of the geologic development of the Laurentian Cone. The cone's sediments can be divided into two megasequences, a lower one of Early Jurassic to Eocene age, which extends from a transitional and oceanic basement to horizon AT, and an upper sequence of early-middle Miocene to Holocene age extending from horizon AT to the sea floor. Plastic flow of Early Jurassic salt at the base of the lower megasequence has resulted in the deformation of the strata above, and the formation of a ridge that extends along the continental rise from Georges Bank to the Grand Banks. Horizon AT, separating the two sequences, is the surface of a fan deposited by turbidity currents during a latest Cretaceous and a late Eocene–Oligocene regression; these regressions may be due to the onset of continental glaciation. Deposition of this regressive wedge initiated the emplacement of the Laurentian Cone. The upper terrigenous megasequence, composed of three coalescing fans, was emplaced through the action of turbidity currents, and reflects the rapidly fluctuating climatic conditions associated with the waxing and waning of continental glaciers from latest Miocene to Holocene. The cone is not being supplied with sediments from the continent at present, but sediment continues to move down-cone in response to sporadic seismic activity.

scholarly journals No mafic layer in 80 km thick Tibetan crust

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Gaochun Wang ◽  
Hans Thybo ◽  
Irina M. Artemieva
Keyword(s):  
Seismic Data ◽  
P Wave ◽  
Indian Plate ◽  
Low Velocity ◽  
Crustal Earthquakes ◽  
Tectonic Processes ◽  
P Wave Velocity ◽  
Juvenile Crust ◽  
Mafic Lower Crust ◽  
Thick Crust

AbstractAll models of the magmatic and plate tectonic processes that create continental crust predict the presence of a mafic lower crust. Earlier proposed crustal doubling in Tibet and the Himalayas by underthrusting of the Indian plate requires the presence of a mafic layer with high seismic P-wave velocity (Vp > 7.0 km/s) above the Moho. Our new seismic data demonstrates that some of the thickest crust on Earth in the middle Lhasa Terrane has exceptionally low velocity (Vp < 6.7 km/s) throughout the whole 80 km thick crust. Observed deep crustal earthquakes throughout the crustal column and thick lithosphere from seismic tomography imply low temperature crust. Therefore, the whole crust must consist of felsic rocks as any mafic layer would have high velocity unless the temperature of the crust were high. Our results form basis for alternative models for the formation of extremely thick juvenile crust with predominantly felsic composition in continental collision zones.

Radon Transform Removes Correlation Noise Produced by Vibroseis

2014 ◽  
Vol 672-674 ◽  
pp. 1964-1967
Author(s):  
Jun Qiu Wang ◽  
Jun Lin ◽  
Xiang Bo Gong
Keyword(s):  
Radon Transform ◽  
Seismic Data ◽  
Cross Correlation ◽  
Random Noise ◽  
Seismic Record ◽  
Electromagnetic Drive ◽  
Seismic Records ◽  
Correlation Noise

Vibroseis obtained the seismic record by cross-correlation detection calculation. compared with dynamite source, cross-correlation detection can suppress random noise, but produce more correlation noise. This paper studies Radon transform to remove correlation noise produced by electromagnetic drive vibroseis and impact rammer. From the results of processing field seismic records, we can see that Radon transform can remove correlation noise by vibroseis, the SNR of vibroseis seismic data is effectively improved.

Unconformities on the Scotian Shelf

1974 ◽  
Vol 11 (1) ◽  
pp. 89-100 ◽  
Author(s):  
Lewis H. King ◽  
Brian MacLean ◽  
Gordon B. Fader
Keyword(s):  
High Resolution ◽  
Seismic Reflection ◽  
Upper Cretaceous ◽  
Scotian Shelf ◽  
Early Tertiary ◽  
Late Tertiary ◽  
Glacial Processes ◽  
Well Data ◽  
Seismic Reflection Profiles ◽  
Cut And Fill

Four erosional unconformities have been recognized within the Mesozoic-Cenozoic succession on the Scotian Shelf, on the basis of data from high resolution seismic reflection profiles. Older unconformities are known from well data and others may be revealed by detailed biostratigraphic studies.The oldest of the four unconformities discussed in this paper is of Early Cretaceous age and appears to mark, with discordance, the boundary between Jurassic and Cretaceous strata on the western part of the shelf. A second angular unconformity, of Late Cretaceous age, has been recognized on the central part of the shelf where the basal part of the Banquereau Formation (Tertiary and uppermost Cretaceous) oversteps the zero-edge of the Wyandot Formation (Upper Cretaceous) and lies upon truncated beds of the Dawson Canyon Formation (Upper Cretaceous). Cut-and-fill relationships characterize a third unconformity developed during Early Tertiary time. A fourth unconformity was developed in Late Tertiary – Pleistocene time by fluvial processes and later by glacial processes. Although in many areas the latest unconformity appears to be the most conspicuous one on the shelf, its configuration closely follows the geomorphic expression developed during the previous period of erosion. The regional extent of the Cretaceous unconformities is not known, and they might only occur near basin margins and on structural and basement highs.

Seismic-to-well tie of a field of the Nigerian Delta

2021 ◽  
Vol 19 (3) ◽  
pp. 125-138
Author(s):  
S. Inichinbia ◽  
A.L. Ahmed
Keyword(s):  
Seismic Data ◽  
Processing Parameters ◽  
Seismic Inversion ◽  
Seismic Wavelet ◽  
Statistical Measures ◽  
Convolution Model ◽  
Data Driven Approach ◽  
Well Data ◽  
Seismic Reflectors ◽  
Matching Techniques

This paper presents a rigorous but pragmatic and data driven approach to the science of making seismic-to-well ties. This pragmatic  approach is consistent with the interpreter’s desire to correlate geology to seismic information by the use of the convolution model,  together with least squares matching techniques and statistical measures of fit and accuracy to match the seismic data to the well data. Three wells available on the field provided a chance to estimate the wavelet (both in terms of shape and timing) directly from the seismic and also to ascertain the level of confidence that should be placed in the wavelet. The reflections were interpreted clearly as hard sand at H1000 and soft sand at H4000. A synthetic seismogram was constructed and matched to a real seismic trace and features from the well are correlated to the seismic data. The prime concept in constructing the synthetic is the convolution model, which represents a seismic reflection signal as a sequence of interfering reflection pulses of different amplitudes and polarity but all of the same shape. This pulse shape is the seismic wavelet which is formally, the reflection waveform returned by an isolated reflector of unit strength at the target  depth. The wavelets are near zero phase. The goal and the idea behind these seismic-to-well ties was to obtain information on the sediments, calibration of seismic processing parameters, correlation of formation tops and seismic reflectors, and the derivation of a  wavelet for seismic inversion among others. Three seismic-to-well ties were done using three partial angle stacks and basically two formation tops were correlated. Keywords: seismic, well logs, tie, synthetics, angle stacks, correlation,

scholarly journals Low-frequency noise suppression for desert seismic data based on a wide inference network

2019 ◽  
Vol 16 (4) ◽  
pp. 801-810
Author(s):  
Yue Li ◽  
Wei Yu ◽  
Chao Zhang ◽  
Baojun Yang
Keyword(s):  
Seismic Data ◽  
Low Frequency ◽  
Seismic Exploration ◽  
Frequency Noise ◽  
Layer By Layer ◽  
Low Frequency Noise ◽  
Time Space ◽  
Manual Adjustment ◽  
Inference Network ◽  
Seismic Records

Abstract The importance of seismic exploration has been recognized by geophysicists. At present, low-frequency noise usually exists in seismic exploration, especially in desert seismic records. This low-frequency noise shares the same frequency band with effective signals. This leads to the limitation or failure of traditional methods. In order to overcome the shortcomings of traditional denoising methods, we propose a novel desert seismic data denoising method based on a Wide Inference Network (WIN). The WIN aims to minimize the error between the prediction and target by residual learning during training, and it can obtain a set of optimal parameters, such as weights and biases. In this article, we construct a high-quality training set for a desert seismic record and this ensures the effective training of a WIN. In this way, each layer of the trained WIN can automatically extract a set of time–space characteristics without manual adjustment. These characteristics are transmitted layer by layer. Finally, they are utilized to extract effective signals. To verify the effectiveness of the WIN, we apply it to synthetic and real desert seismic records, respectively. In addition, we compare WIN with f – x deconvolution, variational mode decomposition (VMD) and shearlet transform. The results show that WIN has the best denoising performance in suppressing low-frequency noise and preserving effective signals.

A procedure for optimally removing localized coherent noise

Geophysics ◽  
1995 ◽  
Vol 60 (1) ◽  
pp. 191-203 ◽  
Author(s):  
A. Frank Linville ◽  
Robert A. Meek
Keyword(s):  
Seismic Data ◽  
Seismic Profile ◽  
Noise Attenuation ◽  
Signal Distortion ◽  
Coherent Noise ◽  
Vertical Seismic Profile ◽  
Seismic Records ◽  
Signal Distortions ◽  
Notch Filtering ◽  
Phase Differences

Primary reflections in seismic records are often obscured by coherent noise making processing and interpretation difficult. Trapped water modes, surface waves, scattered waves, air waves, and tube waves to name a few, must be removed early in the processing sequence to optimize subsequent processing and imaging. We have developed a noise canceling algorithm that effectively removes many of the commonly encountered noise trains in seismic data. All currently available techniques for coherent noise attenuation suffer from limitations that introduce unacceptable signal distortions and artifacts. Also, most of those techniques impose the dual stringent requirements of equal and fine spatial sampling in the field acquisition of seismic data. Our technique takes advantage of characteristics usually found in coherent noise such as being localized in time, highly aliased, nondispersive (or only mildly so), and exhibit a variety of moveout patterns across the seismic records. When coherent noise is localized in time, a window much like a surgical mute is drawn around the noise. The algorithm derives an estimate of the noise in the window, automatically correcting for amplitude and phase differences, and adaptively subtracts this noise from the window of data. This signal estimate is then placed back in the record. In a model and a land data example, the algorithm removes noise more effectively with less signal distortion than does f-k filtering or velocity notch filtering. Downgoing energy in a vertical seismic profile (VSP) with irregular receiver spacing is also removed.

Sign in / Sign up

Export Citation Format

Share Document