Optimization of Enzyme-Assisted Extraction of Carotenoids Antioxidants from Cordyceps militaris Using Response Surface Methodology

Author(s):  
Bai-Juan Wang ◽  
Qing-Song Yang ◽  
Ting Chen ◽  
Xiang-Dong Qin ◽  
Jun-Rong Ma ◽  
...  

Abstract Response surface methodology (RSM) with a Box–Behnken design (BBD) was used to optimize the extraction conditions of carotenoid antioxidants from Cordyceps militaris. An enzyme-assisted extraction (EAE) method was developed and optimized to enhance 2,2-diphenyl-1-picrylhydrazil (DPPH) radical-scavenging activity of carotenoid antioxidants from C. militaris. The optimum conditions were as follows: a pH of 4.1, an extraction time of 40.4 min, an extraction temperature of 48.7 °C and 0.43 % enzyme (cellulose: pectinase, 1:1, w/w) concentration. Under these conditions, the DDPH radical-scavenging activity of C. militaris extracts was 81.62±2.26 %, indicating that the BBD is an efficient approach to develop mathematical models for predictingcarotenoids antioxidant extraction from C. militaris. The successful extraction of carotenoid antioxidants from C. militaris provides a basis for the development and utilization of C. militaris resources.

INDIAN DRUGS ◽  
2019 ◽  
Vol 56 (12) ◽  
pp. 32-38
Author(s):  
H. N Sholapur ◽  
◽  
F. S Dasankoppa ◽  
Z. Abbas ◽  
N.G.N. Swamy

The present study was embarked upon for the optimization of conditions aimed at ultrasonic assisted extraction (UAE) of antioxidant chemicals from Moringa oleifera leaves by applying response surface methodology (RSM) based on face centered central composite design (CCD). Evaluation was done at three levels (20 experimental designs) with three process variables: extraction temperature (20, 30, 40oC), extraction time (20, 30, 40 min) and liquid-solid ratio (20:1, 30:1, 40:1) using probe sonicator. The extraction process optimization based on RSM was focused on the capacity of antioxidants present in the extracts to scavenge the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) free radicals. To envisage the optimization process, multiple regression analysis was carried out using RSM tool to obtain a quadratic polynomial equation. Stastical analysis of the factors and their interactions were tested using analysis of variance (ANOVA). Extraction of antioxidants was mainly influenced by liquid-solid ratio and temperature. The ideal combination of variables designed by RSM for maximum radical-scavenging activity was optimized with extracting temperature of 39.80 °C, extracting time of 39.95 min and liquidsolid ratio of 24.00 mL/g to obtain a predicted value of 85.528% of DPPH radical-scavenging activity, which was very close to the experimentally value of 86.49 % with an error of 1.12%, indicating suitability of the model.


2021 ◽  
Vol 71 (1) ◽  
Author(s):  
Sahar Eskandari ◽  
Zahra Etemadifar

Abstract Purpose To characterize and optimize the productivity of melanin using an extremotolerant actinobacterium, Dietzia schimae NM3, for the first time. Methods An extracellular brown pigment produced by D. schimae NM3 in the nutrient broth and cheese whey medium by adding L-tyrosine. The extracted melanin was analyzed by UV-visible, HPLC, and FTIR assays. The radical scavenging activity (by DPPH) and sun protection factor (SPF) of the extracted melanin were measured. The melanin cytotoxicity was assayed by MTT and chromate biosorption was measured by atomic absorption spectroscopy. Finally, melanin production by D. schimae NM3 was optimized by response surface methodology (RSM) using Box-Behnken design in the whey medium. Result The purified melanin showed similar peak to the standard melanin (SIGMA) at 3.5 min in HPLC, and C=O bands, NH2, CH, C-N, and aromatic groups by FTIR. The radical scavenging activity (by DPPH) and SPF of the extracted melanin were obtained 188.9% and 20.22, respectively. Using MTT assay, the melanin revealed non-toxic effect on the normal human fibroblast (HFB) cell culture. The melanin yield 790 mg l−1, and tyrosinase activity 3400 U ml−1 were obtained in the medium contained whey powder [5% (w v−1)], L-tyrosine 2.5 g l−1, CuSO4 0.013 g l−1, and pH 10.5, incubated at 32 °C for 3 days. The ANOVA results indicated significant P-value, model F-value, and probability, with insignificant lack of fit. After optimization with mono-factors, the nutrient broth came up with melanin yield as 1.2 g l−1 and tyrosinase activity as 4040 U ml−1. Conclusion This is the first report of melanin production by D. schimae NM3 and this natural melanin showed valuable biological properties such as high antioxidant activity and radioprotection (SPF) and the biocompatibility to human cell line.


Author(s):  
Khurul Ain Mohamed Mahzir ◽  
Siti Salwa Abdul Gani ◽  
Nor Fadzillah Mokhtar

In this study, the optimal condition for the extraction of antioxidants from the fruit Buah Mahkota Dewa (Phaleria macrocarpa) was determined by using Response Surface Methodology (RSM). The optimization was applied using central composite design (CCD) to investigate the three independent variables, namely extraction temperature (oC), extraction time (minutes) and extraction solvent to-feed ratio (%v/v) on the responses of free radical scavenging activity (DPPH), ferric ion reducing power assay (FRAP), total phenolic content (TPC) and total flavonoid content (TFC).The optimal conditions for the antioxidants extraction were found to be extraction temperature (64oC), extraction time (66 minutes) and solvent to-feed ratio (75 %v/v) with the highest percentage yield of DPPH, FRAP, TPC and TFC were 86.85%, 7.47%, 292.86 mg/g and 3.22 mg/g respectively. Moreover, the data were subjected to response surface methodology (RSM) and the results showed that the polynomial equations for all models were significant, did not show lack of fit, and presented adjusted determination coefficients (R2) above 99%, proving the yield of phenolic, flavonoid and antioxidants activities obtained experimentally were close to the predicted values and the suitability of the model employed in RSM to optimize the extraction conditions. Hence, in this study, the fruit from P.macrocarpa could be considered to have the strong antioxidant ability and can be used in various cosmeceutical or medicinal applications.


2011 ◽  
Vol 140 ◽  
pp. 379-384
Author(s):  
Gan Lin Guo ◽  
Lei Guo

The objectives of this study were to investigate the effect of fermentation medium on the DPPH radical scavenging activity of exopolysaccharides from marine Penicillium chrysogenum HGQ6 by response surface methodology (RSM). A two-level fractional factorial design was used to evaluate the effect of different components of the medium. Maltose, FeSO4, and K2HPO4 were important factors significantly affecting DPPH radical scavenging activity. These selected variables were subsequently optimized using a Box-Behnken design, and response surface analysis. The optimal medium compositions were (% w/v): maltose 2.71, FeSO4 0.0016, K2HPO4 0.1, and KNO3 1.0. Under these optimal conditions, the DPPH radical scavenging rate achieved 34.0%, which agreed with the predicted values.


2016 ◽  
Vol 12 (6) ◽  
pp. 587-597 ◽  
Author(s):  
Jianxia Li ◽  
Qiaohui Zhang ◽  
Jie Cui ◽  
Yaping Ning ◽  
Fengjun Wang ◽  
...  

Abstract We investigate a flash-assisted extraction of dihydroquercetin (DHQ) from wood sawdust of Larix gmelinii by response surface methodology. Box–Behnken design optimized the extraction conditions, and the highest DHQ yield (6.15 %) was obtained under optimal extraction conditions: FAE time (3 min), extraction time (3 h), solid-to-liquid (g/mL) ratio (1:15), and ethanol concentration (75 %). After purification, the DHQ purity was 96 % as determined by HPLC and was further characterized by FTIR. Purified DHQ’s antioxidant activities were confirmed in vitro by determining DPPH and ABTS radical scavenging activities and reducing Fe3+ power. In the DPPH and ABTS radical scavenging activity assays, DHQ displayed prominent antioxidant activities with low IC50 values (11.568 and 12.475 μg/mL, respectively). In reducing Fe3+ power assay, high DHQ absorbance values showed that DHQ had higher reducing power than butylated hydroxyl toluene and had nearly the same consistent power as ascorbic acid at the same doses.


2012 ◽  
Vol 506 ◽  
pp. 591-594 ◽  
Author(s):  
P. Pintathong ◽  
P. Chanphithak ◽  
P. Sereetaveekul ◽  
N. Thitipramote ◽  
P. Chaiwut

The pod of lotus (Nelumbo nucifera Gaertn.) was value-added by using as raw material for phenolic antioxidant extraction using conventional shaking method. The pericarp part of lotus pod gave the significantly highest values of extractable phenolic content (EPC), flavonoid content and DPPH radical scavenging activity which were equal to 27.15±1.74 mg gallic acid equivalent (GAE)/g dry weight (dw), 0.59±0.04 mg quercetin equivalent (QE)/g dw and 0.65±0.02 mg trolox equivalent antioxidant capacity (TEAC)/g dw, respectively. Response surface methodology (RSM) was further employed to optimize the extraction conditions of phenolic antioxidant from the pod pericarp. Three independent variables, i.e., ethanol concentration (X1), shaking speed (X2) and extraction time (X3) were investigated through two responses of EPC and DPPH radical scavenging activity. The statistical analysis indicates that the three variables and the contribution of quadratic model had significant influence on the all responses (P<0.05). The optimum extraction condition was provided as follows: ethanol concentration 77.6%, shaking speed 223.4 rpm and extraction time 5.2 h. Under the optimized condition, the predicted values of EPC and DPPH radical scavenging activity were 30.00 mg GAE/g dw and 0.74 mg TEAC/g dw, respectively. This could be hence applied in industrial phenolic antioxidant extraction of inedible pericarp of lotus pod.


Sign in / Sign up

Export Citation Format

Share Document