scholarly journals Spiraling light: from donut modes to a Magnus effect analogy

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert J. C. Spreeuw
Keyword(s):  
Angular Momentum ◽  
Optical Tweezers ◽  
Optical Axis ◽  
Optical Tweezer ◽  
Momentum Conservation ◽  
Magnetic Field Direction ◽  
Magnus Effect ◽  
Potential Applications ◽  
The Magnetic Field

Abstract The insight that optical vortex beams carry orbital angular momentum (OAM), which emerged in Leiden about 30 years ago, has since led to an ever expanding range of applications and follow-up studies. This paper starts with a short personal account of how these concepts arose. This is followed by a description of some recent ideas where the coupling of transverse orbital and spin angular momentum (SAM) in tightly focused laser beams produces interesting new effects. The deflection of a focused light beam by an atom in the focus is reminiscent of the Magnus effect known from aerodynamics. Momentum conservation dictates an accompanying light force on the atom, transverse to the optical axis. As a consequence, an atom held in an optical tweezer will be trapped at a small distance of up to λ/2π away from the optical axis, which depends on the spin state of the atom and the magnetic field direction. This opens up new avenues to control the state of motion of atoms in optical tweezers as well as potential applications in quantum gates and interferometry.

scholarly journals Optical vortex lattice: an exploitation of orbital angular momentum

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Liuhao Zhu ◽  
Miaomiao Tang ◽  
Hehe Li ◽  
Yuping Tai ◽  
Xinzhong Li
Keyword(s):  
Angular Momentum ◽  
Optical Tweezers ◽  
Orbital Angular Momentum ◽  
Vortex Lattice ◽  
Optical Vortex ◽  
Yeast Cells ◽  
Particle Manipulation ◽  
Complex Motion ◽  
Potential Applications ◽  
Vortex Beams

Abstract Generally, an optical vortex lattice (OVL) is generated via the superposition of two specific vortex beams. Thus far, OVL has been successfully employed to trap atoms via the dark cores. The topological charge (TC) on each optical vortex (OV) in the lattice is only ±1. Consequently, the orbital angular momentum (OAM) on the lattice is ignored. To expand the potential applications, it is necessary to rediscover and exploit OAM. Here we propose a novel high-order OVL (HO-OVL) that combines the phase multiplication and the arbitrary mode-controllable techniques. TC on each OV in the lattice is up to 51, which generates sufficient OAM to manipulate microparticles. Thereafter, the entire lattice can be modulated to desirable arbitrary modes. Finally, yeast cells are trapped and rotated by the proposed HO-OVL. To the best of our knowledge, this is the first realization of the complex motion of microparticles via OVL. Thus, this work successfully exploits OAM on OVL, thereby revealing potential applications in particle manipulation and optical tweezers.

Conservation laws

2018 ◽  
Author(s):  
Nathalie Deruelle ◽  
Jean-Philippe Uzan
Keyword(s):  
Dynamical System ◽  
Angular Momentum ◽  
Conservation Laws ◽  
Total Energy ◽  
Superposition Principle ◽  
Momentum Conservation ◽  
Conserved Quantities ◽  
Angular Momentum Conservation ◽  
Third Law ◽  
The Law

This chapter defines the conserved quantities associated with an isolated dynamical system, that is, the quantities which remain constant during the motion of the system. The law of momentum conservation follows directly from Newton’s third law. The superposition principle for forces allows Newton’s law of motion for a body Pa acted on by other bodies Pa′ in an inertial Cartesian frame S. The law of angular momentum conservation holds if the forces acting on the elements of the system depend only on the separation of the elements. Finally, the conservation of total energy requires in addition that the forces be derivable from a potential.

A 3 T superconducting magnet for long-run magnetic Compton-scattering experiments

1998 ◽  
Vol 5 (3) ◽  
pp. 937-939 ◽  
Author(s):  
Nobuhiko Sakai ◽  
Hiroshi Ohkubo ◽  
Yasushi Nakamura
Keyword(s):  
Magnetic Field ◽  
Low Temperature ◽  
Compton Scattering ◽  
Superconducting Magnet ◽  
Field Direction ◽  
Compton Profile ◽  
Magnetic Field Direction ◽  
Long Run ◽  
Radiation Shields ◽  
The Magnetic Field

A 3 T superconducting magnet has been designed and constructed for magnetic Compton-profile (MCP) measurements with the new capabilities that the magnetic field direction can be altered quickly (within 5 s) and liquid-He refill is not required for more than one week. For the latter capability, two refrigerators have been directly attached to the cryostat to maintain the low temperature of the radiation shields and for the recondensation of liquid He. The system has been satisfactorily operated for over one week.

scholarly journals Enhanced X-ray emission arising from laser-plasma confinement by a strong transverse magnetic field

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Evgeny D. Filippov ◽  
Sergey S. Makarov ◽  
Konstantin F. Burdonov ◽  
Weipeng Yao ◽  
Guilhem Revet ◽  
...  
Keyword(s):  
Magnetic Field ◽  
Transverse Magnetic ◽  
Radiative Properties ◽  
Magnetic Field Direction ◽  
Solid Target ◽  
Total Plasma ◽  
Plasma Confinement ◽  
X Ray ◽  
Magnetic Compression ◽  
The Magnetic Field

AbstractWe analyze, using experiments and 3D MHD numerical simulations, the dynamic and radiative properties of a plasma ablated by a laser (1 ns, 10$$^{12}$$ 12 –10$$^{13}$$ 13 W/cm$$^2$$ 2 ) from a solid target as it expands into a homogeneous, strong magnetic field (up to 30 T) that is transverse to its main expansion axis. We find that as early as 2 ns after the start of the expansion, the plasma becomes constrained by the magnetic field. As the magnetic field strength is increased, more plasma is confined close to the target and is heated by magnetic compression. We also observe that after $$\sim 8$$ ∼ 8  ns, the plasma is being overall shaped in a slab, with the plasma being compressed perpendicularly to the magnetic field, and being extended along the magnetic field direction. This dense slab rapidly expands into vacuum; however, it contains only $$\sim 2\%$$ ∼ 2 % of the total plasma. As a result of the higher density and increased heating of the plasma confined against the laser-irradiated solid target, there is a net enhancement of the total X-ray emissivity induced by the magnetization.

scholarly journals Rotational broadening and conservation of angular momentum in post-extreme horizontal branch stars

2018 ◽  
Vol 613 ◽  
pp. A66
Author(s):  
G. Fontaine ◽  
M. Latour
Keyword(s):  
Angular Momentum ◽  
Rotation Speed ◽  
Momentum Conservation ◽  
Evolutionary Models ◽  
Horizontal Branch ◽  
Natural Consequence ◽  
Average Value ◽  
Horizontal Branch Stars ◽  
The Moment ◽  
Ehb Stars

We show that the recent realization that isolated post-extreme horizontal branch (post-EHB) stars are generally characterized by rotational broadening with values of V rot sini between 25 and 30 km s−1 can be explained as a natural consequence of the conservation of angular momentum from the previous He-core burning phase on the EHB. The progenitors of these evolved objects, the EHB stars, are known to be slow rotators with an average value of V rot sini of ~7.7 km s−1. This implies significant spin-up between the EHB and post-EHB phases. Using representative evolutionary models of hot subdwarf stars, we demonstrate that angular momentum conservation in uniformly rotating structures (rigid-body rotation) boosts that value of the projected equatorial rotation speed by a factor ~3.6 by the time the model has reached the region of the surface gravity-effective temperature plane where the newly-studied post-EHB objects are found. This is exactly what is needed to account for their observed atmospheric broadening. We note that the decrease of the moment of inertia causing the spin-up is mostly due to the redistribution of matter that produces more centrally-condensed structures in the post-EHB phase of evolution, not to the decrease of the radius per se.

ORIENTATING MANIPULATION OF CYLINDRICAL PARTICLES WITH OPTICAL TWEEZERS

2008 ◽  
Vol 17 (04) ◽  
pp. 387-394 ◽  
Author(s):  
XIUDONG SUN ◽  
XUECONG LI ◽  
JIANLONG ZHANG
Keyword(s):  
Escherichia Coli ◽  
Carbon Nanotubes ◽  
Laser Beam ◽  
Optical Tweezers ◽  
Optical Trap ◽  
Polarization Direction ◽  
Beam Shape ◽  
E Coli ◽  
Potential Applications ◽  
Cylindrical Particles

Orientating manipulations of cylindrical particles were performed by optical tweezers. Vertical and horizontal manipulations of Escherichia coli (E. coli) were carried out by changing the trapping depth and the focused laser beam shape. It was found that carbon nanotubes bundles (CNTBs) could be rotated in the linear polarized optical trap until it orientated its long axis along the linear polarization direction of the laser beam. However, E.coli could not be orientated in this way. Corresponding mechanisms were discussed based on the anisomeric electric characters of CNTBs. These orientation technologies of cylindrical objects with optical trap have potential applications in assembling nano-electric devices.

scholarly journals Assembly of multicomponent structures from hundreds of micron-scale building blocks using optical tweezers

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Jeffrey E. Melzer ◽  
Euan McLeod
Keyword(s):  
Optical Tweezers ◽  
Three Dimensional ◽  
Building Blocks ◽  
Optical Tweezer ◽  
Device Fabrication ◽  
Positional Accuracy ◽  
Component Structure ◽  
Material Development ◽  
Critical Process Parameters ◽  
Optical Positioning

AbstractThe fabrication of three-dimensional (3D) microscale structures is critical for many applications, including strong and lightweight material development, medical device fabrication, microrobotics, and photonic applications. While 3D microfabrication has seen progress over the past decades, complex multicomponent integration with small or hierarchical feature sizes is still a challenge. In this study, an optical positioning and linking (OPAL) platform based on optical tweezers is used to precisely fabricate 3D microstructures from two types of micron-scale building blocks linked by biochemical interactions. A computer-controlled interface with rapid on-the-fly automated recalibration routines maintains accuracy even after placing many building blocks. OPAL achieves a 60-nm positional accuracy by optimizing the molecular functionalization and laser power. A two-component structure consisting of 448 1-µm building blocks is assembled, representing the largest number of building blocks used to date in 3D optical tweezer microassembly. Although optical tweezers have previously been used for microfabrication, those results were generally restricted to single-material structures composed of a relatively small number of larger-sized building blocks, with little discussion of critical process parameters. It is anticipated that OPAL will enable the assembly, augmentation, and repair of microstructures composed of specialty micro/nanomaterial building blocks to be used in new photonic, microfluidic, and biomedical devices.

Sign in / Sign up

Export Citation Format

Share Document