scholarly journals 3D noise mapping for preselected locations of urban area with and without noise barriers: A case study of Delhi, India

Noise Mapping ◽  
2020 ◽  
Vol 7 (1) ◽  
pp. 74-83
Author(s):  
Pervez Alam ◽  
Kafeel Ahmad ◽  
S. S. Afsar ◽  
Nasim Akhtar
Keyword(s):  
Noise Level ◽  
Urban Areas ◽  
Road Traffic ◽  
Traffic Noise ◽  
Residential Building ◽  
Noise Pollution ◽  
Critical Issue ◽  
Road Traffic Noise ◽  
Noise Barriers ◽  
Noise Mapping

AbstractNoise pollution has been rising as a critical issue in recent days particularly for the people living in urban areas. This study has been conducted to find out the effects of traffic induced noise on nearby residential building through 3D noise mapping with and without noise Barriers. Monitoring has been carried out at various densely populated preselected locations of Delhi, India. Thereafter, 3D noise mapping has been done using hourly average noise levels for the locations exposed with maximum noise. The developed 3D noise map shows the variation of noise level along X, Y and Z direction for all selected locations before and after installation of noise barriers. Moreover, the result also shows that exact assessment of noise impact is possible through 3D noise mapping, when a multistory building close to the source of noise is taken into consideration. This paper also elaborates the adequate height, distance and NRC value of noise barrier to reduce the effect of road traffic noise on nearby high rise building. Reduction pattern of noise level can easily be visualized and evaluated by using these maps. This type of study could support decision makers during adaptation of suitable remedial measures.

scholarly journals Noise Events Monitoring for Urban and Mobility Planning in Andorra la Vella and Escaldes-Engordany

Environments ◽  
2019 ◽  
Vol 6 (2) ◽  
pp. 24 ◽  
Author(s):  
Rosa Alsina-Pagès ◽  
Robert Garcia Almazán ◽  
Marc Vilella ◽  
Marc Pons
Keyword(s):  
Urban Areas ◽  
Road Traffic ◽  
Signal To Noise Ratio ◽  
Traffic Noise ◽  
Critical Factor ◽  
Noise Pollution ◽  
Urban Environments ◽  
Road Traffic Noise ◽  
City Life ◽  
The Impact

Noise pollution is a critical factor and it has an important impact on public health, with the relationship between road traffic noise (RTN) and several illnesses in urban areas of particular concern. Andorra is currently developing a national strategy regarding noise pollution in their urban environments. The Ministry of Environment, Agriculture and Sustainability is trying to to identify, monitor, map and model the effects of noise pollution and design mitigation policies to reduce the impact in certain priority areas. This analysis should take into account the existence of different types of anomalous noise events (ANEs) present in the street, e.g., horns, people talking, music, and other events that coexist with RTN, to characterize the soundscape of each of the locations. This paper presents a preliminary analysis considering both the Signal-to-Noise Ratio (SNR) and the duration of the ANEs to evaluate their presence in urban areas in the three different locations in Andorra la Vella and Escaldes-Engordany. The experiments conducted required a 10-h recording campaign distributed in the three locations under study, which was evaluated on two different days, one during the week and the other on the weekend. Afterwards, the data were carefully labeled and the SNR of each event was evaluated to determine the potential impact of the four categories under study: vehicles, works, city life and people.

scholarly journals Road Traffic Noise Pollution a Hazard

1970 ◽  
Vol 42 (4) ◽  
pp. 435-440
Author(s):  
Tayyaba Aftab ◽  
Farzana Bashir ◽  
Tahira Shafiq
Keyword(s):  
Noise Level ◽  
Road Traffic ◽  
Traffic Noise ◽  
Working Hours ◽  
Noise Pollution ◽  
Road Traffic Noise ◽  
Engineering Controls ◽  
Frequent Use ◽  
High Level ◽  
Average Noise Level

A road traffic noise study was conducted in Lahore at 18 busy places of high traffic flow in peak working hours of the day. It has been found that the day time average noise level has crossed the permissible limit of 85dB(A) at 90% busy points in the city. The maximum average noise level recorded in Lahore was 104 dB(A). This high level attributed to vehicular traffic specially auto rickshaw with ineffective silencers (without filters) and frequent use of the pressure horns by buses, wagons and trucks etc. The findings of the survey provide enough baseline data for engineering controls and interim legislation against traffic noise pollution. Key words: Noise pollution, Traffics load , Community health, Lahore city Bangladesh J. Sci. Ind. Res. 42(4), 435-440, 2007

Measurement of Acoustic Properties of the Safety Anti-Skid Modification - ROCBINDATM

2018 ◽  
Vol 1145 ◽  
pp. 140-145
Author(s):  
Petr Kozak ◽  
Radka Matuszkova ◽  
Michal Radimsky
Keyword(s):  
Traffic Safety ◽  
Urban Areas ◽  
Road Traffic ◽  
Traffic Noise ◽  
Noise Pollution ◽  
Acoustic Properties ◽  
Road Traffic Noise ◽  
The Road ◽  
Vehicle Propulsion

The noise pollution is an important factor for people living near roads. The road traffic noise is endangering the health of these residents and the quality of their lives. The tyre / road noise became the most significant source of the road traffic noise due reduced noise emissions from the vehicle propulsion system by the automotive industry. An important recent trend is increasing the traffic safety by improving anti-skid properties of roads in critical locations. Experts have concluded that some anti-skid modifications may increase the noise pollution. Because the usage of such pavements is predominantly in urban areas, problems may occur. This paper deals with the noise level of the safety anti-skid modification of the road surface used in the urban areas. Based on the presented measurement values it can be said that the RocbindaTM safety anti-skid modification does not achieve any increased acoustic performance compared to the asphalt pavement.

scholarly journals REVIEW ON THE ROAD TRAFFIC NOISE ASSESSMENT

2016 ◽  
Vol 22 (1) ◽  
Author(s):  
PETROVICI ALINA ◽  
TOMOZEI CLAUDIA ◽  
NEDEFF FLORIN ◽  
IRIMIA OANA ◽  
PANAINTE-LEHADUS MIRELA
Keyword(s):  
Urban Areas ◽  
Road Traffic ◽  
Traffic Noise ◽  
Legal Aspects ◽  
Urban Traffic ◽  
Road Traffic Noise ◽  
Action Plans ◽  
Noise Mapping ◽  
The Road ◽  
On The Road

<p>This paper presents a synthesis of current state of the assessment of road traffic noise in urban areas considering economic, social and legal aspects. Therefore, there were described several prediction methods of the urban traffic noise. These methods are useful in calculating the exposure of the population at noise levels which exceed the permissible limits. Mapping is one of the most common methods used for the assessment of noise. Whether it is industrial, airport, rail or road traffic noise, noise mapping provides accurate data needed later in developing action plans against noise. The road traffic noise assessments are performed periodically, and a representative picture of the noise in the analysed areas is obtained. Then, the action plans can be developed in order to reduce road traffic noise, where it is necessary.</p>

scholarly journals Theoretical Comparison of the Effects of Different Traffic Conditions on Urban Road Traffic Noise

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Mohammad Maghrour Zefreh ◽  
Adam Torok
Keyword(s):  
Traffic Flow ◽  
Noise Level ◽  
Urban Areas ◽  
Road Traffic ◽  
Traffic Noise ◽  
Urban Traffic ◽  
Road Traffic Noise ◽  
Traffic Lights ◽  
Urban Road ◽  
Traffic Conditions

Road traffic noise is one of the most relevant sources in the environmental noise pollution of the urban areas where dynamics of the traffic flow are much more complicated than uninterrupted traffic flows. It is evident that different traffic conditions would play the role in the urban traffic flow considering the dynamic nature of the traffic flow on one hand and presence of traffic lights, roundabouts, etc. on the other hand. The main aim of the current paper is to investigate the effect of different traffic conditions on urban road traffic noise. To do so, different traffic conditions have been theoretically generated by the Monte Carlo Simulation technique following the distribution of traffic speed in the urban roads. The “ASJ RTN-Model” has been considered as a base road traffic noise prediction model which would deal with different traffic conditions including steady and nonsteady traffic flow that would cover the urban traffic flow conditions properly. Having generated the vehicles speeds in different traffic conditions, the emitted noise (LWA) and subsequently the noise level at receiver (LA) were estimated by “ASJ RTN-Model.” Having estimated LWA and LA for each and every vehicle in each traffic condition and taking the concept of transient noise into account, the single event sound exposure levels (SEL) in different traffic conditions are calculated and compared to each other. The results showed that decelerated traffic flow had the lowest contribution, compared to congestion, accelerated flow, free flow, oversaturated congestion, and undersaturated flow by 16%, 14%, 12%, 12%, and 10%, respectively. Moreover, the distribution of emitted noise and noise level at receiver were compared in different traffic conditions. The results showed that traffic congestion had considerably the maximum peak compared to other traffic conditions which would highlight the importance of the range of generated noise in different traffic conditions.

Low-Noise Asphalt Pavements in Urban Areas

2016 ◽  
Vol 858 ◽  
pp. 282-286
Author(s):  
Petr Kozak ◽  
Ondrej Dasek ◽  
Radka Matuszkova ◽  
Michal Radimsky
Keyword(s):  
Asphalt Concrete ◽  
Urban Areas ◽  
Road Traffic ◽  
Traffic Noise ◽  
Noise Pollution ◽  
Low Noise ◽  
Thin Layers ◽  
Asphalt Pavements ◽  
Road Traffic Noise ◽  
Vehicle Speed

Current requirements for the reduction of the noise pollution in inhabited areas are constantly increasing. Acoustic wearing courses represent the real measures how to directly mitigate sources of road traffic noise created by a tire/road contact. Directly reduced noise emissions created by a tire/road contact don't need further mitigation by expensive noise barriers. Noise emissions on two different types of wearing courses of asphalt mixtures (Asphalt concrete for very thin layers and Low-noise stone mastic asphalt) were measured using the specialized device operating on the basis of CPX (Close Proximity method) and compared with the standard mixture of Asphalt concrete. Differences were between 1 dB and 5 dB depending on the wearing course and the vehicle speed. The efficiency of the low-noise asphalt pavements was also compared with the initial costs of the pavements. The economical evaluation confirmed that the initial costs of the acoustic wearing courses are higher than the costs of the standard asphalt concrete mixture. However the noise reduction by 1 dB using the asphalt concrete for very thin layers increases the costs just by 350 USD (considering the same length and width of the road segment), which makes acoustic wearing courses the economically efficient noise reducing measure.

scholarly journals MODELLING URBAN NOISE IN CITYGML ADE: CASE OF THE NETHERLANDS

2017 ◽  
Vol IV-4/W5 ◽  
pp. 73-81 ◽  
Author(s):  
K. Kumar ◽  
H. Ledoux ◽  
T. J. F. Commandeur ◽  
J. E. Stoter
Keyword(s):  
Urban Areas ◽  
Input Data ◽  
Road Traffic ◽  
Traffic Noise ◽  
Environmental Noise ◽  
Motor Vehicles ◽  
Road Traffic Noise ◽  
Noise Levels ◽  
Noise Mapping ◽  
Urban Noise

Road traffic and industrial noise has become a major source of discomfort and annoyance among the residents in urban areas. More than 44&amp;thinsp;% of the EU population is regularly exposed to road traffic noise levels over 55 dB, which is currently the maximum accepted value prescribed by the Environmental Noise Directive for road traffic noise. With continuously increasing population and number of motor vehicles and industries, it is very unlikely to hope for noise levels to diminish in the near future. Therefore, it is necessary to monitor urban noise, so as to make mitigation plans and to deal with its adverse effects. The 2002/49/EC Environmental Noise Directive aims to determine the exposure of an individual to environmental noise through noise mapping. One of the most important steps in noise mapping is the creation of input data for simulation. At present, it is done semi-automatically (and sometimes even manually) by different companies in different ways and is very time consuming and can lead to errors in the data. In this paper, we present our approach for automatically creating input data for noise simulations. Secondly, we focus on using 3D city models for presenting the results of simulation for the noise arising from road traffic and industrial activities in urban areas. We implemented a few noise modelling standards for industrial and road traffic noise in CityGML by extending the existing Noise ADE with new objects and attributes. This research is a steping stone in the direction of standardising the input and output data for noise studies and for reconstructing the 3D data accordingly.

Application of BP Neural Network in Traffic Noise Prediction

2012 ◽  
Vol 518-523 ◽  
pp. 3838-3842
Author(s):  
Gang Liu ◽  
Li Hua Lin ◽  
Rui Tian
Keyword(s):  
Neural Network ◽  
Bp Neural Network ◽  
Urban Areas ◽  
Road Traffic ◽  
Traffic Noise ◽  
Noise Pollution ◽  
Measured Data ◽  
Sound Level ◽  
Road Traffic Noise ◽  
Noise Prediction

A model of BP neural network for road traffic noise prediction was established by using some road traffic parameters in this paper. Then use this model to predict equivalent continual sound level of road traffic noise, After an overview about the neural approach, the learning; and production phase results are shown and contrasted with the measured data. They point out how good is the approach proposed to model noise pollution in urban areas.

scholarly journals WASN-Based Day–Night Characterization of Urban Anomalous Noise Events in Narrow and Wide Streets

Sensors ◽  
2020 ◽  
Vol 20 (17) ◽  
pp. 4760
Author(s):  
Francesc Alías ◽  
Joan Claudi Socoró ◽  
Rosa Ma Alsina-Pagès
Keyword(s):  
Urban Areas ◽  
Road Traffic ◽  
Low Cost ◽  
Traffic Noise ◽  
Road Traffic Noise ◽  
Noise Mapping ◽  
General Terms ◽  
Acoustic Sensor Networks ◽  
Time Period ◽  
Acoustic Environments

In addition to air pollution, environmental noise has become one of the major hazards for citizens, being Road Traffic Noise (RTN) as its main source in urban areas. Recently, low-cost Wireless Acoustic Sensor Networks (WASNs) have become an alternative to traditional strategic noise mapping in cities. In order to monitor RTN solely, WASN-based approaches should automatize the off-line removal of those events unrelated to regular road traffic (e.g., sirens, airplanes, trams, etc.). Within the LIFE DYNAMAP project, 15 urban Anomalous Noise Events (ANEs) were described through an expert-based recording campaign. However, that work only focused on the overall analysis of the events gathered during non-sequential diurnal periods. As a step forward to characterize the temporal and local particularities of urban ANEs in real acoustic environments, this work analyses their distribution between day (06:00–22:00) and night (22:00–06:00) in narrow (1 lane) and wide (more than 1 lane) streets. The study is developed on a manually-labelled 151-h acoustic database obtained from the 24-nodes WASN deployed across DYNAMAP’s Milan pilot area during a weekday and a weekend day. Results confirm the unbalanced nature of the problem (RTN represents 83.5% of the data), while identifying 26 ANE subcategories mainly derived from pedestrians, animals, transports and industry. Their presence depends more significantly on the time period than on the street type, as most events have been observed in the day-time during the weekday, despite being especially present in narrow streets. Moreover, although ANEs show quite similar median durations regardless of time and location in general terms, they usually present higher median signal-to-noise ratios at night, mainly on the weekend, which becomes especially relevant for the WASN-based computation of equivalent RTN levels.

scholarly journals Detection of Anomalous Noise Events for Real-Time Road-Traffic Noise Mapping: The Dynamap’s project case study

Noise Mapping ◽  
2018 ◽  
Vol 5 (1) ◽  
pp. 71-85 ◽  
Author(s):  
Francesc Alías ◽  
Rosa Ma Alsina-Pagès ◽  
Ferran Orga ◽  
Joan Claudi Socoró
Keyword(s):  
Real Time ◽  
Road Traffic ◽  
Low Cost ◽  
Traffic Noise ◽  
Real Life ◽  
Noise Pollution ◽  
Environmental Noise ◽  
Operating Conditions ◽  
Road Traffic Noise ◽  
Noise Mapping

Abstract Environmental noise is increasing year after year, especially in urban and suburban areas. Besides annoyance, environmental noise also causes harmful health effects on people. The Environmental Noise Directive 2002/49/EC (END) is the main instrument of the European Union to identify and combat noise pollution, followed by the CNOSSOS-EU methodological framework. In compliance with the END legislation, the European Member States are required to publish noise maps and action plans every five years. The emergence of Wireless Acoustic Sensor Networks (WASNs) have changed the paradigm to address the END regulatory requirements, allowing the dynamic ubiquitous measurement of environmental noise pollution. Following the END, the LIFE DYNAMAP project aims to develop a WASN-based low-cost noise mapping system to monitor the acoustic impact of road infrastructures in real time. Those acoustic events unrelated to regular traffic noise should be removed from the equivalent noise level calculations to avoid biasing the noise map generation. This work describes the different approaches developed within the DYNAMAP project to implement an Anomalous Noise Event Detector on the low-cost sensors of the network, considering both synthetic and real-life acoustic data.Moreover, the paper reflects on several open challenges, discussing how to tackle them for the future deployment of WASN-based noise monitoring systems in real-life operating conditions.

Sign in / Sign up

Export Citation Format

Share Document