The experience of introducing a hybrid intermittent heating system for educational institutions is presented. The analysis of theoretical and experimental research, modern energy technologies for the integration of renewable energy sources into innovative and existing heat supply systems for buildings. The adaptation of modern developments of hybrid systems to buildings operating both in permanent and intermittent operation mode (administrative institutions, educational institutions and other public buildings) has been carried out. The conditions for increasing the efficiency of using heterogeneous renewable energy sources in combined heat supply systems have been established. For the proposed combined heat supply system, a hybrid heat generation is provided using low-potential renewable heat sources in the heat pump cycle and high-potential traditional heat sources in a pellet boiler. A mathematical model of the operating modes of a combined heat supply system using renewable heat sources is proposed, which can be used for numerical modeling of thermal processes in a variable heat supply mode for public buildings. The study of the dynamics of heating the premises when changing the climatic conditions of different regions of Ukraine, including the southern regions, is done. This makes it possible to analyze the efficiency of using alternative energy sources for heat supply and substantiate the conditions for including heat accumulators in the circuit. The research results are relevant because allow to achieve significant energy savings for heat supply of public buildings, characterized by a low level of energy efficiency. The proposed solutions indicate that the combined use of the capabilities of heterogeneous renewable energy sources can be effective only with a hybrid method of heat generation using a heat pump and a pellet boiler, taking into account the operating mode of buildings. As a result of theoretical and experimental studies, it was established: the dynamics of heating and cooling of premises with a high accumulation capacity; the share of replacement of the consumed thermal power in the hybrid use of heat generators. The conditions for the most effective use of heat accumulators in a combined heat supply system have been established. The results obtained make it possible to increase the efficiency of the use of renewable energy sources for public buildings, taking into account the mode of their operation, in which the heat supply system operates in an intermittent mode
Experimental determination of the efficiency of the solar collector integrated into the light transparent building facade
