scholarly journals Source Properties of a Hollow Cathode Arc Plasma

1986 ◽  
Vol 41 (4) ◽  
pp. 585-600
Author(s):  
J. M. M. J. Vogels ◽  
L. U. E. Konings ◽  
D. C. Schram

Experiments have been carried out on the properties of a hollow cathode as an ion-source.The measured electron density, ion and neutral temperatures and drift velocities have been compared with predictions from the conservation laws for matter, momentum and energy.Very large exit drift velocities of ions and neutrals are observed. The magnitude and direction, against the electric field, can be explained on the basis of the momentum balance. At weak magnetic field strengths even supersonic drift velocities are found. The charge flux carried by the ions is about five percent of the net arc current. For small flows, the ionized fraction of the gas supply approaches 100%.The neutral particle density outside the cathode consist of a fraction drifting with a large velocity out of the cathode and a fraction of cool background atoms. The change of the ratio of these fractions with increasing distance to the cathode causes the average neutral particle drift to decrease very rapidly.Finally, an analysis of the overall cathode power balance is given.

2021 ◽  
pp. 65-68
Author(s):  
I. Sereda ◽  
D. Ryabchikov ◽  
Ya. Hrechko ◽  
Ie. Babenko

The influence of metal hydride hollow cathode on a Penning ion source operation has been carried out. The feature of investigation is hydrogen injection only due to its desorption from metal hydride under ion-stimulated processes. The regimes of optimal discharge operation in the hollow cathode mode are determined. It has been revealed that the transition to the hollow cathode mode occurs at lower voltages, the discharge works without external gas supply, and the working pressure in the cell is set at the level determined by the discharge current. The supply of a negative bias to the metal hydride hollow cathode weakly affects the features of the emission of axial particles, although it allows the increase of plasma density near the metal hydride hollow cathode.


1997 ◽  
Vol 36 (Part 2, No. 10B) ◽  
pp. L1406-L1409 ◽  
Author(s):  
Gou-Tsau Liang ◽  
Franklin Chau-Nan Hong

2014 ◽  
Vol 783-786 ◽  
pp. 1426-1431
Author(s):  
Wang Ryeol Kim ◽  
Min Chul Kwon ◽  
Jung Hoon Lee ◽  
Uoo Chang Jung ◽  
Won Sub Chung

TiAlSiN coatings were deposited on WC-Co metal by using a cathodic arc ion deposition method of cylindrical cathode. We used Ti / Al (50 / 50 at.%) arc target and silicon sputter target. The influence of the nitrogen pressure, TiAl cathode arc current, bias voltage, and deposition temperature on the mechanical and the structural properties of the films were investigated. The structural features of the films were investigation in detail using X-ray diffraction. And coatings were characterized by means of FE-SEM, nanoindentation, Scratch tester, Tribology tester, XRD and XPS. The hardness of the film reached 43 GPa at the cathode arc current of 230 A and decreased with a further increase of the arc current. And the adhesion of the film reached 34 N. The results showed that the TiAlSiN coating exhibited an excellent mechanical properties which application for tools and molds.


1976 ◽  
Vol 47 (9) ◽  
pp. 1219-1221 ◽  
Author(s):  
Rafael Schnitzer ◽  
Ferdinand C. Engesser
Keyword(s):  

Author(s):  
A. Tonegawa ◽  
T. Shimoyama ◽  
E. Yabe ◽  
K. Takayama ◽  
K. Takagi ◽  
...  

2020 ◽  
Vol 91 (12) ◽  
pp. 123301
Author(s):  
A. D. Melnik ◽  
V. I. Afanasyev ◽  
V. I. Davydenko ◽  
A. V. Kolmogorov ◽  
M. I. Mironov ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document