Natural Convection in a Porous Medium Bounded by a Long Vertical WavyWall and a Parallel Flat Wall

2010 ◽  
Vol 65 (10) ◽  
pp. 800-810 ◽  
Author(s):  
Ambrish K. Tiwari ◽  
Ashok K. Singh
Keyword(s):  
Porous Medium ◽  
Nusselt Number ◽  
Natural Convection ◽  
Numerical Study ◽  
Temperature Fields ◽  
Wavy Wall ◽  
Heat Flows ◽  
Flat Wall ◽  
Porous Region ◽  
Parallel Wall

This paper presents natural convection in a porous medium bounded by a long vertical wavy wall and a parallel wall. The shape of the wavy wall is assumed to follow a profile of cosine curve. The wall is kept at a constant heat flux while the parallel wall is kept at a constant temperature. The governing systems of nonlinear partial differential equations in their non-dimensional form are linearised by using the perturbation method in terms of amplitude and the analytical solutions for velocity and temperature fields have been obtained in terms of various parameters occurring in the model. A numerical study of the analytical solution is performed with respect to the realistic fluid air in order to illustrate the interactive influences of governing parameters on the temperature and velocity fields as well as skin friction and Nusselt number. It is found that in the case of maximum waviness (positive and negative), the velocity component along the wall has a reverse trend near the flat wall. It is observed that the parallel flow through the channel at zero waviness is greater than at maximum waviness (positive and negative) while the same trend occurs for perpendicular flow in the opposite direction. Examination of the Nusselt number shows that in the presence and absence of a heat source, the heat flows from the porous region towards the walls but in the presence of a sink, the heat flows from the walls into the porous region.

scholarly journals Numerical study of the effects of natural convection in a thermoacoustic configuration

2019 ◽  
Vol 20 (8) ◽  
pp. 807
Author(s):  
Omar Hireche ◽  
Catherine Weisman ◽  
Diana Baltean-Carlès ◽  
Virginie Daru ◽  
Yann Fraigneau
Keyword(s):  
Porous Medium ◽  
Natural Convection ◽  
Numerical Study ◽  
Three Dimensional ◽  
Boussinesq Approximation ◽  
Acoustic Resonator ◽  
Operating Conditions ◽  
Temperature Fields ◽  
Convection Flow ◽  
Conductivity Anisotropy

This study focuses on natural convection flows within a cylindrical guide containing a porous medium. This configuration is applicable to standing-wave thermoacoustic engines, usually composed of an acoustic resonator where a (short) stack (or porous medium) is inserted, with a heat exchanger placed at one of its ends. The resulting horizontal temperature gradient, when high enough, triggers the onset of an acoustic wave. Natural convection effects are usually neglected in thermoacoustics so that axisymmetry is often assumed. Here a 3D numerical study of natural convection flow is performed using a finite volume code for solving mixed Navier-Stokes and Darcy-Brinkman equations under Boussinesq approximation. The influence of the porous medium’s physical characteristics (permeability, thermal conductivity, anisotropy) on the flow and temperature fields is investigated. It is shown that such flows are fully three-dimensional and therefore can modify significantly starting as well as steady operating conditions of the thermoacoustic engine.

Study on Natural Convection in Horizontal Parallel Plate Channels Heated on Upper Wall and Partially Filled With Metal Foam

2020 ◽  
Author(s):  
Bernardo Buonomo ◽  
Vincenzo Fardella ◽  
Oronzio Manca ◽  
Sergio Nardini ◽  
Salvatore Pragliola
Keyword(s):  
Porous Medium ◽  
Nusselt Number ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Average Nusselt Number ◽  
Metal Foam ◽  
Open Cavity ◽  
Temperature Fields ◽  
Local Thermal Equilibrium ◽  
Uniform Heat Flux

Abstract In this work, a numerical investigation on two-dimensional steady state natural convection in a horizontal channel partially filled with a porous medium and heated at uniform heat flux from above is carried out. The lower plate is adiabatic. The porous medium is modeled using the Brinkman–Forchheimer-extended Darcy model and the local thermal equilibrium (LTE) hypothesis is assumed. The structure of the porous medium is homogenous and isotropic, the thermophysical properties of the air and the porous medium are temperature independent and the fluid flow is laminar and incompressible. The aluminum foam has 10, 20 and 40 pore per inches (PPI) and its porosity ranges from 0.90 and 0.95. Rayleigh number values are examined, from 6.0 × 104 and 1.2 × 107. Results are presented in terms of velocity and temperature fields, temperature and velocity profiles at different significant sections are shown, to obtain a description of the natural convection inside the open-ended cavity. Finally, Average Nusselt number values are evaluated. The horizontal open cavity partially filled with metal foam presents improved heat transfer behavior for higher Rayleigh numbers. The enhancement depends on the porosity and pore density. The average Nusselt number for the partially filled open cavity is the double of the configuration without the foam, clear configuration, for the highest considered Rayleigh number.

Effect of Periodicity of Non-Uniform Sinusoidal Side Heating on Natural Convection in an Anisotropic Porous-Enclosure

2011 ◽  
Vol 110-116 ◽  
pp. 1613-1618 ◽  
Author(s):  
S. Kapoor ◽  
P. Bera
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Natural Convection ◽  
Stream Function ◽  
Numerical Study ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Maximum Heat ◽  
Maximum Heat Transfer ◽  
Porous Enclosure

A comprehensive numerical study on the natural convection in a hydrodynamically anisotropic as well as isotropic porous enclosure is presented, flow is induced by non uniform sinusoidal heating of the right wall of the enclosure. The principal directions of the permeability tensor has been taken oblique to the gravity vector. The spectral Element method has been adopted to solve numerically the governing differential equations by using the vorticity-stream-function approach. The results are presented in terms of stream function, temperature profile and Nusselt number. The result show that the maximum heat transfer takes place at y = 1.5 when N is odd.. Also, increasing media permeability, by changing K* = 1 to K* = 0.2, increases heat transfer rate at below and above right corner of the enclosure. Furthermore, for the all values of N, profiles of local Nusselt number (Nuy) in isotropic as well as anisotropic media are similar, but for even values of N differ slightly at N = 2.. In particular the present analysis shows that, different periodicity (N) of temperature boundary condition has the significant effect on the flow pattern and consequently on the local heat transfer phenomena.

scholarly journals Natural convection in a differentially heated enclosure with triangular roof

1970 ◽  
Vol 39 (1) ◽  
pp. 1-7 ◽  
Author(s):  
Sumon Saha ◽  
Noman Hasan ◽  
Chowdhury Md Feroz
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Fluid Flow ◽  
Natural Convection ◽  
Average Nusselt Number ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Element Analysis ◽  
Left Wall ◽  
Square Enclosure

A numerical study has been carried out for laminar natural convection heat transfer within a two-dimensional modified square enclosure having a triangular roof. The vertical sidewalls are differentially heated considering a constant flux heat source strip is flush mounted with the left wall. The opposite wall is considered isothermal having a temperature of the surrounding fluid. The rest of the walls are adiabatic. Air is considered as the fluid inside the enclosure. The solution has been carried out on the basis of finite element analysis by a non-linear parametric solver to examine the heat transfer and fluid flow characteristics. Different heights of the triangular roof have been considered for the present analysis. Fluid flow fields and isotherm patterns and the average Nusselt number are presented for the Rayleigh numbers ranging from 103 to 106 in order to show the effects of these governing parameters. The average Nusselt number computed for the case of isoflux heating is also compared with the case of isothermal heating as available in the literature. The outcome of the present investigation shows that the convective phenomenon is greatly influenced by the inclined roof height. Keywords: Natural convection, triangular roof, Rayleigh number, isoflux heating. Doi:10.3329/jme.v39i1.1826 Journal of Mechanical Engineering, vol. ME39, No. 1, June 2008 1-7

scholarly journals Effects of Anisotropy on Natural Convection in a Vertical Porous Cavity Filled with a Heat Generation

2020 ◽  
pp. 12-27
Author(s):  
Degan Gerard ◽  
Sokpoli Amavi Ernest ◽  
Akowanou Djidjoho Christian ◽  
Vodounnou Edmond Claude
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Temperature Fields ◽  
Poisson Equations ◽  
Gravitational Vector ◽  
Side Walls ◽  
Rayleigh Numbers ◽  
Vertical Cavity

This research was devoted to the analytical study of heat transfer by natural convection in a vertical cavity, confining a porous medium, and containing a heat source. The porous medium is hydrodynamically anisotropic in permeability whose axes of permeability tensor are obliquely oriented relative to the gravitational vector and saturated with a Newtonian fluid. The side walls are cooled to the temperature  and the horizontal walls are kept adiabatic. An analytical solution to this problem is found for low Rayleigh numbers by writing the solutions of mathematical model in polynomial form of degree n of the Rayleigh number. Poisson equations obtained are solved by the modified Galerkin method. The results are presented in term of streamlines and isotherms. The distribution of the streamlines and the temperature fields are greatly influenced by the permeability anisotropy parameters and the thermal conductivity. The heat transfer decreases considerably when the Rayleigh number increases.

scholarly journals Numerical study of the turbulent natural convection of nanofluids in a partially heated cubic cavity

2021 ◽  
pp. 57-57
Author(s):  
Zakaria Lafdaili ◽  
Sakina El-Hamdani ◽  
Abdelaziz Bendou ◽  
Karim Limam ◽  
Bara El-Hafad
Keyword(s):  
Nusselt Number ◽  
Natural Convection ◽  
Heat Exchange ◽  
Metallic Nanoparticles ◽  
Volume Fraction ◽  
Numerical Study ◽  
Three Dimensional ◽  
Stability Characteristic ◽  
Horizontal Strip ◽  
Turbulent Natural Convection

In this work we study numerically the three-dimensional turbulent natural convection in a partially heated cubic cavity filled with water containing metallic nanoparticles, metallic oxides and others based on carbon.The objective is to study and compare the effect of the addition of nanoparticles studied in water and also the effect of the position of the heated partition on the heat exchange by turbulent natural convection in this type of geometry, which can significantly improve the design of heat exchange systems for better space optimization. For this we have treated numerically for different volume fractions the turbulent natural convection in the two cases where the cavity is heated respectively by a vertical and horizontal strip in the middle of one of the vertical walls. To take into account the effects of turbulence, we used the standard turbulence model ? - ?. The governing equations are discretized by the finite volume method using the power law scheme which offers a good stability characteristic in this type of flow. The results are presented in the form of isothermal lines and current lines. The variation of the mean Nusselt number is calculated for the two positions of the heated partition as a function of the volume fraction of the nanoparticles studied in water for different Rayleigh numbers.The results show that carbon-based nanoparticles intensify heat exchange by convection better and that the position of the heated partition significantly influences heat exchange by natural convection. In fact, an improvement in the average Nusselt number of more than 20% is observed for the case where the heated partition is horizontal.

scholarly journals Numerical Study of Mixed Convection in a Channel Filled with a Porous Medium

2019 ◽  
Vol 9 (2) ◽  
pp. 211 ◽  
Author(s):  
Filiz Ozgen ◽  
Yasin Varol
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Mixed Convection ◽  
Nuclear Waste ◽  
Numerical Study ◽  
Temperature Fields ◽  
Dimensionless Form ◽  
Geothermal Resources ◽  
Nusselt Numbers ◽  
The Finite Difference Method

The heat transfer of mixed convection in a horizontal channel filled with a porous medium has been studied in this article, given that it plays an extensive role in various technical applications, such as flow of fluid in geothermal resources, formations in chemical industries, the storage of radioactive nuclear waste material, and cooling. Those equations written in a dimensionless form have been solved using the finite difference method for different values of the parameters. The results obtained from the study have been presented through streamlines, isotherms, and both local and average Nusselt numbers. It has been observed that parameters such as the Rayleigh and Peclet numbers have an effect on flow and temperature fields.

Natural Convection in a Cylindrical Enclosure Filled With Heat Generating Anisotropic Porous Medium

2001 ◽  
Vol 124 (1) ◽  
pp. 203-207 ◽  
Author(s):  
M. R. Dhanasekaran ◽  
Sarit Kumar Das ◽  
S. P. Venkateshan
Keyword(s):  
Porous Medium ◽  
Natural Convection ◽  
Thermal Diffusivity ◽  
Aspect Ratio ◽  
Numerical Study ◽  
Critical Value ◽  
Permeability Ratio ◽  
Anisotropic Permeability ◽  
Anisotropic Porous Medium ◽  
Diffusivity Ratio

A numerical study has been made to analyze the effects of anisotropic permeability and thermal diffusivity on natural convection in a heat generating porous medium contained in a vertical cylindrical enclosure with isothermal wall and the top and bottom perfectly insulated surfaces. The results show that the anisotropies influence the flow field and heat transfer rate significantly. The non-dimensional maximum cavity temperature increases with increase in permeability ratio. For aspect ratio greater than or equal to two, the nondimensional maximum cavity temperature increases with an increase in the thermal diffusivity ratio. For aspect ratio equal to unity, there exists a critical value of thermal diffusivity ratio at which the maximum cavity temperature is a minimum. This critical value increases with an increase in the value of anisotropic permeability ratio. Based on a parametric study correlations for maximum cavity temperature and average Nusselt number are presented.

Sign in / Sign up

Export Citation Format

Share Document