The lean boost combustion system for improved fuel economy

Author(s):  
T. Lake ◽  
J. Stokes ◽  
R. Osborne ◽  
R. Murphy ◽  
M. Keenan
1994 ◽  
Author(s):  
J. Stokes ◽  
T. H. Lake ◽  
M. J. Christie ◽  
Ingemar Denbratt

Author(s):  
Yiran Hu ◽  
Ibrahim Haskara ◽  
Chen-Fang Chang ◽  
Kaveh Khodadadi Sadabadi ◽  
Ayyoub Rezaeian ◽  
...  

To meet the more stringent emissions and fuel economy regulations, engine control system has become significantly more complex than before. As a result of this, engine calibration on the dynamometer now occupies one of the longest time sections in the vehicle development process. One strategy automakers have adopted is to use the same engine in multiple applications to reduce the calibration effort. Even then, vehicle design constraints often require changes to be made to the engine’s external components such as the intake and exhaust manifolds. These changes can create variations in the engine combustion behavior so that the engine must be recalibrated on the dyno, resulting in additional cost and effort. This paper explores the potential of reusing existing engine dyno data for a modified engine in these scenarios through the use of the so-called eigenvariable to describe engine operating conditions. Traditionally, engine dyno data is referenced by engine load and speed along with actuator positions (such as camphaser positions). The proposed approach describes dyno data using eigenvariables or variables that describe the engine in-cylinder condition prior to combustion. Eigenvariables are invariant with respect to external engine hardware. This invariance enables the same dyno data to be applied to a modified engine with the same combustion system design.


1985 ◽  
Author(s):  
Yoshiro Kimbara ◽  
Kazuo Shinoda ◽  
Hiroshi Koide ◽  
Nobuyuki Kobayashi

1998 ◽  
Vol 120 (3) ◽  
pp. 641-647 ◽  
Author(s):  
F. F. Pischinger

The diesel engine is known as the most fuel efficient combustion engine. Its acceptance for use in passengers cars, however, varies geographically. Today, the diesel car plays an important role in Europe; in France, for instance, it is achieving a remarkable market share of about 42 percent, while in the US its market penetration can be neglected. Many questions are expressed concerning the future of diesel powered cars. The question affecting market acceptance is as follows: can the significantly better fuel efficiency of a diesel car outweigh perceived detrimental characteristics? Such unfavorable properties are thought to be low specific power, objectionable noise, higher exhaust emissions (including smoke), and higher vehicle price. These features are closely influenced by the state of passenger car diesel engine technology. This technology state and its potential must be evaluated with respect to current and future demands, for instance, tighter exhaust emission regulations. In addition, the commercial value and consumer acceptance of high fuel economy must be evaluated. It is clear that the ultimate result of weighing the pros and cons will depend not only on technological factors, but also on political factors such as fuel taxation. Regarding the state of technology, the diesel car is very promising. First, by employing a direct injection combustion system, the fuel efficiency can be improved by about 15 percent over current swirl chamber engines. Furthermore, the specific power (hp/ltr) can be increased by efficient supercharging to achieve values of today’s gasoline engines. By tuning the combustion system, low noise engine design features and incorporation of careful noise reduction measures on the vehicle, the noise behavior of a spark ignited vehicle can be reached. Exhaust emissions can currently be reduced to a level to satisfy today’s European and US Tier 1 emission limits. However, significant development effort remains. More stringent emission levels (California US, Tier 2 ULEV, and Stage 3 in Europe) require further advancements in diesel combustion. The strong development potential of 4-value engines and new unique injection systems is evident. In addition, there are promising developments with lean NOx catalysts and regenerative particulate filters. These technologies offer the potential to meet the very stringent future emission standards. It is anticipated that the sophisticated technology needed to meet these standards will make the future diesel car more expensive compared to a gasoline fueled vehicle. This raises the issue of what price will the consumer pay for the higher fuel economy of a diesel car. In light of the worldwide rapid increase in passenger car population and of the dwindling oil reserves and their global distribution, the fuel efficient diesel engine will play an important role in the future of passenger cars.


Author(s):  
J R Needham ◽  
S Whelan

In order to investigate and demonstrate the potential of the high-speed direct injection (HSDI) diesel engine, Ricardo have undertaken a programme of research and analysis into the performance and emissions of a four-valve/cylinder combustion system. Analytical studies were based on a computational fluid dynamics investigation to model in-bowl events of fuel spray/air interactions and to improve understanding of the mixing processes. The major variables studied during the test programme included swirl ratio, combustion bowl geometry, nozzle configuration, contemporary and advanced electronic rotary fuel injection pumps and the effects of exhaust gas recirculation (EGR). A systematic optimization programme provided a fixed swirl configuration capable of achieving in excess of 15 bar b.m.e.p. (brake mean effective pressure) while providing less than 1.0 Bosch smoke unit. R49 EURO II NOx levels were met with competitive smoke, particulate emissions and fuel economy, demonstrating excellent potential for full EURO II compliance with further development. Vehicle emissions and fuel consumption simulations have shown that the combustion system has the potential to meet both the heavy and light duty emissions legislation planned for the 1990s.


Author(s):  
W. T. Donlon ◽  
J. E. Allison ◽  
S. Shinozaki

Light weight materials which possess high strength and durability are being utilized by the automotive industry to increase fuel economy. Rapidly solidified (RS) Al alloys are currently being extensively studied for this purpose. In this investigation the microstructure of an extruded Al-8Fe-2Mo alloy, produced by Pratt & Whitney Aircraft, Goverment Products Div. was examined in a JE0L 2000FX AEM. Both electropolished thin sections, and extraction replicas were examined to characterize this material. The consolidation procedure for producing this material included a 9:1 extrusion at 340°C followed by a 16:1 extrusion at 400°C, utilizing RS powders which have also been characterized utilizing electron microscopy.


Sign in / Sign up

Export Citation Format

Share Document