scholarly journals Fully Phased Sequence of a Diploid Human Genome Determined de Novo from the DNA of a Single Individual

2020 ◽  
Vol 10 (9) ◽  
pp. 2911-2925
Author(s):  
llya Soifer ◽  
Nicole L Fong ◽  
Nelda Yi ◽  
Andrea T Ireland ◽  
Irene Lam ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genome Assembly ◽  
De Novo ◽  
Sequence Data ◽  
Phenotypic Trait ◽  
Single Individual ◽  
Phase Information ◽  
Metaphase Chromosomes ◽  
De Novo Genome Assembly ◽  
Diploid Genome

Abstract In recent years, improved sequencing technology and computational tools have made de novo genome assembly more accessible. Many approaches, however, generate either an unphased or only partially resolved representation of a diploid genome, in which polymorphisms are detected but not assigned to one or the other of the homologous chromosomes. Yet chromosomal phase information is invaluable for the understanding of phenotypic trait inheritance in the cases of compound heterozygosity, allele-specific expression or cis-acting variants. Here we use a combination of tools and sequencing technologies to generate a de novo diploid assembly of the human primary cell line WI-38. First, data from PacBio single molecule sequencing and Bionano Genomics optical mapping were combined to generate an unphased assembly. Next, 10x Genomics linked reads were combined with the hybrid assembly to generate a partially phased assembly. Lastly, we developed and optimized methods to use short-read (Illumina) sequencing of flow cytometry-sorted metaphase chromosomes to provide phase information. The final genome assembly was almost fully (94%) phased with the addition of approximately 2.5-fold coverage of Illumina data from the sequenced metaphase chromosomes. The diploid nature of the final de novo genome assembly improved the resolution of structural variants between the WI-38 genome and the human reference genome. The phased WI-38 sequence data are available for browsing and download at wi38.research.calicolabs.com. Our work shows that assembling a completely phased diploid genome de novo from the DNA of a single individual is now readily achievable.

scholarly journals Long-read sequencing and de novo genome assembly of marine medaka (Oryzias melastigma)

BMC Genomics ◽  
2020 ◽  
Vol 21 (1) ◽  
Author(s):  
Pingping Liang ◽  
Hafiz Sohaib Ahmed Saqib ◽  
Xiaomin Ni ◽  
Yingjia Shen
Keyword(s):  
Dna Repair ◽  
Positive Selection ◽  
Single Molecule ◽  
Genome Assembly ◽  
De Novo ◽  
Gene Families ◽  
Comparative Genomic ◽  
De Novo Genome Assembly ◽  
Marine Medaka ◽  
Oryzias Melastigma

Abstract Background Marine medaka (Oryzias melastigma) is considered as an important ecotoxicological indicator to study the biochemical, physiological and molecular responses of marine organisms towards increasing amount of pollutants in marine and estuarine waters. Results In this study, we reported a high-quality and accurate de novo genome assembly of marine medaka through the integration of single-molecule sequencing, Illumina paired-end sequencing, and 10X Genomics linked-reads. The 844.17 Mb assembly is estimated to cover more than 98% of the genome and is more continuous with fewer gaps and errors than the previous genome assembly. Comparison of O. melastigma with closely related species showed significant expansion of gene families associated with DNA repair and ATP-binding cassette (ABC) transporter pathways. We identified 274 genes that appear to be under significant positive selection and are involved in DNA repair, cellular transportation processes, conservation and stability of the genome. The positive selection of genes and the considerable expansion in gene numbers, especially related to stimulus responses provide strong supports for adaptations of O. melastigma under varying environmental stresses. Conclusions The highly contiguous marine medaka genome and comparative genomic analyses will increase our understanding of the underlying mechanisms related to its extraordinary adaptation capability, leading towards acceleration in the ongoing and future investigations in marine ecotoxicology.

scholarly journals A high-quality de novo genome assembly from a single parasitoid wasp

2020 ◽  
Author(s):  
Xinhai Ye ◽  
Yi Yang ◽  
Zhaoyang Tian ◽  
Le Xu ◽  
Kaili Yu ◽  
...  
Keyword(s):  
Genome Assembly ◽  
De Novo ◽  
Parasitoid Wasp ◽  
Genome Comparison ◽  
Single Individual ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Low Input ◽  
A Genome ◽  
High Level

AbstractSequencing and assembling a genome with a single individual have several advantages, such as lower heterozygosity and easier sample preparation. However, the amount of genomic DNA of some small sized organisms might not meet the standard DNA input requirement for current sequencing pipelines. Although few studies sequenced a single small insect with about 100 ng DNA as input, it may still be challenging for many small organisms to obtain such amount of DNA from a single individual. Here, we use 20 ng DNA as input, and present a high-quality genome assembly for a single haploid male parasitoid wasp (Habrobracon hebetor) using Nanopore and Illumina. Because of the low input DNA, a whole genome amplification (WGA) method is used before sequencing. The assembled genome size is 131.6 Mb with a contig N50 of 1.63 Mb. A total of 99% Benchmarking Universal Single-Copy Orthologs are detected, suggesting the high level of completeness of the genome assembly. Genome comparison between H. hebetor and its relative Bracon brevicornis shows a high-level genome synteny, indicating the genome of H. hebetor is highly accurate and contiguous. Our study provides an example for de novo assembling a genome from ultra-low input DNA, and will be used for sequencing projects of small sized species and rare samples, haploid genomics as well as population genetics of small sized species.

scholarly journals A High-Quality De Novo Genome Assembly from a Single Mosquito using PacBio Sequencing

2018 ◽  
Author(s):  
Sarah B. Kingan ◽  
Haynes Heaton ◽  
Juliana Cudini ◽  
Christine C. Lambert ◽  
Primo Baybayan ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genome Assembly ◽  
Population Genomics ◽  
De Novo ◽  
Anopheles Coluzzii ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Core Technology ◽  
Conserved Genes ◽  
Diploid Individual

AbstractA high-quality reference genome is a fundamental resource for functional genetics, comparative genomics, and population genomics, and is increasingly important for conservation biology. PacBio Single Molecule, Real-Time (SMRT) sequencing generates long reads with uniform coverage and high consensus accuracy, making it a powerful technology for de novo genome assembly. Improvements in throughput and concomitant reductions in cost have made PacBio an attractive core technology for many large genome initiatives, however, relatively high DNA input requirements (∼5 µg for standard library protocol) have placed PacBio out of reach for many projects on small organisms that have lower DNA content, or on projects with limited input DNA for other reasons. Here we present a high-quality de novo genome assembly from a single Anopheles coluzzii mosquito. A modified SMRTbell library construction protocol without DNA shearing and size selection was used to generate a SMRTbell library from just 100 ng of starting genomic DNA. The sample was run on the Sequel System with chemistry 3.0 and software v6.0, generating, on average, 25 Gb of sequence per SMRT Cell with 20 hour movies, followed by diploid de novo genome assembly with FALCON-Unzip. The resulting curated assembly had high contiguity (contig N50 3.5 Mb) and completeness (more than 98% of conserved genes are present and full-length). In addition, this single-insect assembly now places 667 (>90%) of formerly unplaced genes into their appropriate chromosomal contexts in the AgamP4 PEST reference. We were also able to resolve maternal and paternal haplotypes for over 1/3 of the genome. By sequencing and assembling material from a single diploid individual, only two haplotypes are present, simplifying the assembly process compared to samples from multiple pooled individuals. The method presented here can be applied to samples with starting DNA amounts as low as 100 ng per 1 Gb genome size. This new low-input approach puts PacBio-based assemblies in reach for small highly heterozygous organisms that comprise much of the diversity of life.

scholarly journals A High-Quality De novo Genome Assembly from a Single Mosquito Using PacBio Sequencing

Genes ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 62 ◽  
Author(s):  
Sarah Kingan ◽  
Haynes Heaton ◽  
Juliana Cudini ◽  
Christine Lambert ◽  
Primo Baybayan ◽  
...  
Keyword(s):  
Single Molecule ◽  
Genome Assembly ◽  
Population Genomics ◽  
De Novo ◽  
Anopheles Coluzzii ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Core Technology ◽  
Conserved Genes ◽  
Diploid Individual

A high-quality reference genome is a fundamental resource for functional genetics, comparative genomics, and population genomics, and is increasingly important for conservation biology. PacBio Single Molecule, Real-Time (SMRT) sequencing generates long reads with uniform coverage and high consensus accuracy, making it a powerful technology for de novo genome assembly. Improvements in throughput and concomitant reductions in cost have made PacBio an attractive core technology for many large genome initiatives, however, relatively high DNA input requirements (~5 µg for standard library protocol) have placed PacBio out of reach for many projects on small organisms that have lower DNA content, or on projects with limited input DNA for other reasons. Here we present a high-quality de novo genome assembly from a single Anopheles coluzzii mosquito. A modified SMRTbell library construction protocol without DNA shearing and size selection was used to generate a SMRTbell library from just 100 ng of starting genomic DNA. The sample was run on the Sequel System with chemistry 3.0 and software v6.0, generating, on average, 25 Gb of sequence per SMRT Cell with 20 h movies, followed by diploid de novo genome assembly with FALCON-Unzip. The resulting curated assembly had high contiguity (contig N50 3.5 Mb) and completeness (more than 98% of conserved genes were present and full-length). In addition, this single-insect assembly now places 667 (>90%) of formerly unplaced genes into their appropriate chromosomal contexts in the AgamP4 PEST reference. We were also able to resolve maternal and paternal haplotypes for over 1/3 of the genome. By sequencing and assembling material from a single diploid individual, only two haplotypes were present, simplifying the assembly process compared to samples from multiple pooled individuals. The method presented here can be applied to samples with starting DNA amounts as low as 100 ng per 1 Gb genome size. This new low-input approach puts PacBio-based assemblies in reach for small highly heterozygous organisms that comprise much of the diversity of life.

scholarly journals High-throughput long paired-end sequencing of a Fosmid library by PacBio

Plant Methods ◽  
2019 ◽  
Vol 15 (1) ◽  
Author(s):  
Zhaozhao Dai ◽  
Tong Li ◽  
Jiadong Li ◽  
Zhifei Han ◽  
Yonglong Pan ◽  
...  
Keyword(s):  
Resistance Gene ◽  
Single Molecule ◽  
Genome Assembly ◽  
De Novo ◽  
Average Length ◽  
New Method ◽  
Segmental Duplications ◽  
Structural Rearrangements ◽  
De Novo Genome Assembly ◽  
Paired End Sequencing

Abstract Background Large insert paired-end sequencing technologies are important tools for assembling genomes, delineating associated breakpoints and detecting structural rearrangements. To facilitate the comprehensive detection of inter- and intra-chromosomal structural rearrangements or variants (SVs) and complex genome assembly with long repeats and segmental duplications, we developed a new method based on single-molecule real-time synthesis sequencing technology for generating long paired-end sequences of large insert DNA libraries. Results A Fosmid vector, pHZAUFOS3, was developed with the following new features: (1) two 18-bp non-palindromic I-SceI sites flank the cloning site, and another two sites are present in the skeleton of the vector, allowing long DNA inserts (and the long paired-ends in this paper) to be recovered as single fragments and the vector (~ 8 kb) to be fragmented into 2–3 kb fragments by I-SceI digestion and therefore was effectively removed from the long paired-ends (5–10 kb); (2) the chloramphenicol (Cm) resistance gene and replicon (oriV), necessary for colony growth, are located near the two sides of the cloning site, helping to increase the proportion of the paired-end fragments to single-end fragments in the paired-end libraries. Paired-end libraries were constructed by ligating the size-selected, mechanically sheared pooled Fosmid DNA fragments to the Ampicillin (Amp) resistance gene fragment and screening the colonies with Cm and Amp. We tested this method on yeast and Setaria italica Yugu1. Fosmid-size paired-ends with an average length longer than 2 kb for each end were generated. The N50 scaffold lengths of the de novo assemblies of the yeast and S. italica Yugu1 genomes were significantly improved. Five large and five small structural rearrangements or assembly errors spanning tens of bp to tens of kb were identified in S. italica Yugu1 including deletions, inversions, duplications and translocations. Conclusions We developed a new method for long paired-end sequencing of large insert libraries, which can efficiently improve the quality of de novo genome assembly and identify large and small structural rearrangements or assembly errors.

scholarly journals De novo genome assembly of the endangered Acer yangbiense, a plant species with extremely small populations endemic to Yunnan Province, China

GigaScience ◽  
2019 ◽  
Vol 8 (7) ◽  
Author(s):  
Jing Yang ◽  
Hafiz Muhammad Wariss ◽  
Lidan Tao ◽  
Rengang Zhang ◽  
Quanzheng Yun ◽  
...  
Keyword(s):  
Plant Species ◽  
Single Molecule ◽  
Dna Sequences ◽  
Genome Assembly ◽  
Yunnan Province ◽  
De Novo ◽  
Small Populations ◽  
High Quality ◽  
Illumina Hiseq ◽  
De Novo Genome Assembly

Abstract Background Acer yangbiense is a newly described critically endangered endemic maple tree confined to Yangbi County in Yunnan Province in Southwest China. It was included in a programme for rescuing the most threatened species in China, focusing on “plant species with extremely small populations (PSESP)”. Findings We generated 64, 94, and 110 Gb of raw DNA sequences and obtained a chromosome-level genome assembly of A. yangbiense through a combination of Pacific Biosciences Single-molecule Real-time, Illumina HiSeq X, and Hi-C mapping, respectively. The final genome assembly is ∼666 Mb, with 13 chromosomes covering ∼97% of the genome and scaffold N50 sizes of 45 Mb. Further, BUSCO analysis recovered 95.5% complete BUSCO genes. The total number of repetitive elements account for 68.0% of the A. yangbiense genome. Genome annotation generated 28,320 protein-coding genes, assisted by a combination of prediction and transcriptome sequencing. In addition, a nearly 1:1 orthology ratio of dot plots of longer syntenic blocks revealed a similar evolutionary history between A. yangbiense and grape, indicating that the genome has not undergone a whole-genome duplication event after the core eudicot common hexaploidization. Conclusion Here, we report a high-quality de novo genome assembly of A. yangbiense, the first genome for the genus Acer and the family Aceraceae. This will provide fundamental conservation genomics resources, as well as representing a new high-quality reference genome for the economically important Acer lineage and the wider order of Sapindales.

scholarly journals An improved de novo genome assembly of the common marmoset genome yields improved contiguity and increased mapping rates of sequence data

BMC Genomics ◽  
2020 ◽  
Vol 21 (S3) ◽  
Author(s):  
Vasanthan Jayakumar ◽  
Hiromi Ishii ◽  
Misato Seki ◽  
Wakako Kumita ◽  
Takashi Inoue ◽  
...  
Keyword(s):  
Genome Assembly ◽  
De Novo ◽  
Sequence Data ◽  
Common Marmoset ◽  
De Novo Genome Assembly ◽  
The Common

scholarly journals Human Genome Assembly in 100 Minutes

2019 ◽  
Author(s):  
Chen-Shan Chin ◽  
Asif Khalak
Keyword(s):  
Single Molecule ◽  
Dna Sequences ◽  
Genome Assembly ◽  
De Novo ◽  
Critical Factor ◽  
Read Length ◽  
De Novo Genome Assembly ◽  
Small Indels ◽  
Sequencing Technologies ◽  
Long Read

AbstractDe novo genome assembly provides comprehensive, unbiased genomic information and makes it possible to gain insight into new DNA sequences not present in reference genomes. Many de novo human genomes have been published in the last few years, leveraging a combination of inexpensive short-read and single-molecule long-read technologies. As long-read DNA sequencers become more prevalent, the computational burden of generating assemblies persists as a critical factor. The most common approach to long-read assembly, using an overlap-layout-consensus (OLC) paradigm, requires all-to-all read comparisons, which quadratically scales in computational complexity with the number of reads. We assert that recently achievements in sequencing technology (i.e. with accuracy ~99% and read length ~10-15k) enables a fundamentally better strategy for OLC that is effectively linear rather than quadratic. Our genome assembly implementation, Peregrine uses sparse hierarchical minimizers (SHIMMER) to index reads thereby avoiding the need for an all-to-all read comparison step. Peregrine can assemble 30x human PacBio CCS read datasets in less than 30 CPU hours and around 100 wall-clock minutes to a high contiguity assembly (N50 > 20Mb). The continued advance of sequencing technologies coupled with the Peregrine assembler enables routine generation of human de novo assemblies. This will allow for population scale measurements of more comprehensive genomic variations -- beyond SNPs and small indels -- as well as novel applications requiring rapid access to de novo assemblies.

scholarly journals SMARTdenovo: A de novo Assembler Using Long Noisy Reads

2020 ◽  
Author(s):  
Hailin Liu ◽  
Shigang Wu ◽  
Alun Li ◽  
Jue Ruan
Keyword(s):  
Error Correction ◽  
Single Molecule ◽  
Genome Assembly ◽  
De Novo ◽  
Structural Variants ◽  
High Quality ◽  
De Novo Genome Assembly ◽  
Single Molecule Sequencing ◽  
Long Read ◽  
Reference Quality

Long-read single-molecule sequencing has revolutionized de novo genome assembly and enabled the automated reconstruction of reference-quality genomes. It also has been widely used to study structural variants, phase haplotypes and more. Here, we introduce the assembler— SMARTdenovo, which is an SMS assembler that follows the overlap-layout-consensus (OLC) paradigm. SMARTdenovo (RRID: SCR_017622) was designed to be a fast assembler that did not require highly accurate raw reads for error correction, unlike other, contemporaneous SMS assemblers. It has performed well for evaluating congeneric assemblers and has been successful for a variety of assembly projects. It is compatible with Canu for assembling high-quality genomes, and several of the assembly strategies in this program have been incorporated into subsequent popular assemblers. The assembler has been in use since 2015, and here we provide information on the development of SMARTdenovo and how to implement its algorithms into current projects.

Sign in / Sign up

Export Citation Format

Share Document