scholarly journals Study on the effect of carbon fiber addition on the properties of rice straw-plastic composites

BioResources ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 3411-3421
Author(s):  
Xuesong Guan ◽  
Dingguo Zhou ◽  
Mingzhu Pan ◽  
He Chen ◽  
Chunxiang Ding
Keyword(s):  
Carbon Fiber ◽  
Rice Straw ◽  
Carbon Fibers ◽  
High Density Polyethylene ◽  
High Density ◽  
Test Machine ◽  
The Matrix ◽  
Infrared Spectrometer ◽  
Short Carbon ◽  
Skeleton Structure

Short carbon fiber (SCF), rice straw powder, and high-density polyethylene (HDPE) were melted, mixed, and compounded into composites by compression molding. The effects of carbon fiber content on the mechanical properties of rice straw-high density polyethylene composites (RHCs) were studied. The carbon fibers were characterized by a universal capability test machine (UCTM), scanning electron microscope (SEM), DMA dynamic mechanical analyzer, and a Fourier infrared spectrometer. The results showed that the addition of carbon fiber was beneficial to reduce the creep of RHCs. Meanwhile, the carbon fibers were broken after strength testing. The functional group types of rice straw WPC composites did not change, and the skeleton structure of WPC materials was still retained. When the content of carbon fibers was 9%, a large number of carbon fibers were surrounded by the HDPE matrix; the fibers were broken and rarely pulled out. The results showed that good interfacial bonding took place between the carbon fibers and the composites. The maximum tensile strength of the RHC/S9 was 15.15 MPa, which was 20.7% higher than that of default RHC, and the modulus of elasticity was 52.5% higher than that of default RHC. However, due to the large content of carbon fiber, the distribution of the carbon fibers was uneven in the matrix, and the toughness was reduced.

Time-dependent uniaxial piezoresistive behavior of high-density polyethylene/short carbon fiber conductive composites

2004 ◽  
Vol 19 (9) ◽  
pp. 2625-2634 ◽  
Author(s):  
Q. Zheng ◽  
J.F. Zhou ◽  
Y.H. Song
Keyword(s):  
Carbon Fiber ◽  
High Density Polyethylene ◽  
Volume Fraction ◽  
High Density ◽  
Constant Stress ◽  
Time Dependent ◽  
Short Carbon Fiber ◽  
Conductive Composites ◽  
Short Carbon ◽  
Resistance Relaxation

Short carbon fiber (SCF) filled high-density polyethylene conductive composites were studied in terms of time-dependent piezoresistive behaviors. The time-dependent change of resistance under constant stress or strain was found to be the succession of the previous pressure-dependent piezoresistance. Depending on the filler volume fraction and the level of the constant stress or strain, resistance creep and resistance relaxation with different directions were observed. An empirical expression similar to the Burgers equation could be applied to fit the data for both the resistance creep and the resistance relaxation. The fitted relaxation time as a function of pressure showed that there exist two competing processes controlling the piezoresistive behavior and its time dependence. Mechanical creep and stress relaxation of the composites were also studied, and a comparison with the time-dependent resistance implied that there is a conducting percolation network attributed to the physical contacts between SCF and a mechanical network formed by the molecular entanglement or physical crosslinking of the polymer matrix and the interaction between the filler and the matrix. It is believed that the two networks dominate the electrical and the mechanical behaviors, respectively.

scholarly journals Absorption and Strength Properties of Short Carbon Fiber Reinforced Mortar Composite

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 300
Author(s):  
Md. Safiuddin ◽  
George Abdel-Sayed ◽  
Nataliya Hearn
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Water Absorption ◽  
Carbon Fibers ◽  
Strength Properties ◽  
Fiber Content ◽  
Test Results ◽  
Air Content ◽  
Entrapped Air ◽  
Short Carbon

This paper presents the water absorption and strength properties of short carbon fiber reinforced mortar (CFRM) composite. Four CFRM composites with 1%, 2%, 3%, and 4% short pitch-based carbon fibers were produced in this study. Normal Portland cement mortar (NCPM) was also prepared for use as the control mortar. The freshly mixed mortar composites were tested for workability, wet density, and entrapped air content. In addition, the hardened mortar composites were examined for compressive strength, splitting tensile strength, flexural strength, and water absorption at the ages of 7 and 28 days. The effects of different carbon fiber contents on the tested properties were observed. Test results showed that the incorporation of carbon fibers decreased the workability and wet density, but increased the entrapped air content in mortar composite. Most interestingly, the compressive strength of CFRM composite increased up to 3% carbon fiber content and then it declined significantly for 4% fiber content, depending on the workability and compaction of the mortar. In contrast, the splitting tensile strength and flexural strength of the CFRM composite increased for all fiber contents due to the greater cracking resistance and improved bond strength of the carbon fibers in the mortar. The presence of short pitch-based carbon fibers significantly strengthened the mortar by bridging the microcracks, resisting the propagation of these minute cracks, and impeding the growth of macrocracks. Furthermore, the water absorption of CFRM composite decreased up to 3% carbon fiber content and then it increased substantially for 4% fiber content, depending on the entrapped air content of the mortar. The overall test results suggest that the mortar with 3% carbon fibers is the optimum CFRM composite based on the tested properties.

scholarly journals Thermo-mechanical behavior of epoxy composite reinforced by carbon and Kevlar fiber

2018 ◽  
Vol 225 ◽  
pp. 01022
Author(s):  
Falak O. Abasi ◽  
Raghad U. Aabass
Keyword(s):  
Mechanical Properties ◽  
Carbon Fiber ◽  
Flexural Strength ◽  
Carbon Fibers ◽  
Epoxy Composites ◽  
Fiber Reinforced ◽  
Fiber Loading ◽  
Kevlar Fiber ◽  
Carbon Fiber Reinforced ◽  
Short Carbon

Newer manufacturing techniques were invented and introduced during the last few decades; some of them were increasingly popular due to their enhanced advantages and ease of manufacturing over the conventional processes. Polymer composite material such as glass, carbon and Kevlar fiber reinforced composite are popular in high performance and light weight applications such as aerospace and automobile fields. This research has been done by reinforcing the matrix (epoxy) resin with two kinds of the reinforcement fibers. One weight fractions were used (20%) wt., Epoxy reinforced with chopped carbon fiber and second reinforcement was epoxy reinforced with hybrid reinforcements Kevlar fiber and improved one was the three laminates Kevlar fiber and chopped carbon fibers reinforced epoxy resin. After preparation of composite materials some of the mechanical properties have been studied. Four different fiber loading, i.e., 0 wt. %, 20wt. % CCF, 20wt. % SKF, AND 20wt. %CCF + 20wt. % SKF were taken for evaluating the above said properties. The thermal and mechanical properties, i.e., hardness load, impact strength, flexural strength (bending load), and thermal conductivity are determined to represent the behaviour of composite structures with that of fibers loading. The results show that with the increase in fiber loading the mechanical properties of carbon fiber reinforced epoxy composites increases as compared to short carbon fiber reinforced epoxy composites except in case of hardness, short carbon fiber reinforced composites shows better results. Similarly, flexural strength test, Impact test, and Brinell hardness test the results show the flexural strength, impact strength of the hybrid composites values were increased with existence of Kevlar fibers, while the hardness was decrease. But the reinforcement with carbon fibers increases the hardness and decreases other tests.

Short Carbon Fibers Composites With High Filler Contents Rheology and Mechanical Properties

1999 ◽  
Author(s):  
Y. Schmitt ◽  
C. Paulick ◽  
Y. Bour ◽  
F. X. Royer
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Tensile Test ◽  
Carbon Fibers ◽  
Polymer Materials ◽  
Complex Geometries ◽  
Small Ratio ◽  
The Matrix ◽  
Short Carbon

Abstract The control of the quality of mixture based on very short carbon fibers and epoxyde resins leads to suitable mixture for molding of complex geometries. A gain in fluidity is obtained if the suspensions are treated by ultrasounds and simultaneously stirred under vacuum. Addition in a very small ratio of microbubbles in the mixture allows to obtain a viscosity less than those of the matrix alone. For many polymer materials the gain of fluidity can be of 20 to 25% with size and concentration of the microspheres thoroughly chosen. A certain number of new resins is developped to elaborate composite materials with specific mechanical properties close to standard aluminium. Tensile test an ultimate stress are used to quantify the improvements of the mechanical properties. Fillers concentrations up to 30 % are obtained.

A Study on Mechanical Properties of Short Carbon Fiber Reinforced Polycarbonate via an Injection Molding Process

2020 ◽  
Vol 18 (11) ◽  
pp. 801-805
Author(s):  
Kyung-Soo Jeon ◽  
R. Nirmala ◽  
Seong-Hwa Hong ◽  
Yong-II Chung ◽  
R. Navamathavan ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Carbon Fiber ◽  
Carbon Fibers ◽  
Testing Machine ◽  
Fiber Content ◽  
Injection Molding Process ◽  
Mechanical And Thermal Properties ◽  
Molding Process ◽  
Short Carbon Fiber ◽  
Short Carbon

This manuscript is dealt with the synthesis of short carbon fibers reinforced polycarbonate polymer composite by using injection modeling technique. Four different composite materials were obtained by varying the carbon fibers weight percentage of 10, 20, 30 and 40%. The synthesized carbon fibers/polycarbonate composites were characterized for their morphological, mechanical and thermal properties by means of scanning electron microscopy (SEM), universal testing machine (UTM) and IZOD strength test. The resultant carbon fibers/polycarbonate composites exhibited excellent interfacial adhesion between carbon fibers and polycarbonate resin. The tensile properties were observed to be monotonically increases with increasing carbon fiber content in the composite resin. The tensile strength of carbon fiber/polycarbonate composites with the carbon fiber content 40% were increased about 8 times than that of the pristine polycarbonate matrix. The carbon fibers/polycarbonate composites with 40 wt.% of short carbon fibers exhibited a high tensile strength and thermal conductivity. The incorporation of carbon fiber in to polycarbonate resin resulted in a significant enhancement in the mechanical and the thermal behavior. These studies suggested that the short carbon fiber incorporated polycarbonate composite matrix is a good candidate material for many technological applications.

Influence of carbon fiber content on bio-tribological performances of high-density polyethylene

2019 ◽  
Vol 6 (12) ◽  
pp. 125307 ◽  
Author(s):  
Yasin Akgul ◽  
Hayrettin Ahlatci ◽  
Muhammet Emre Turan ◽  
Mehmet Akif Erden ◽  
Yavuz Sun ◽  
...  
Keyword(s):  
Carbon Fiber ◽  
High Density Polyethylene ◽  
High Density ◽  
Fiber Content
Sign in / Sign up

Export Citation Format

Share Document