scholarly journals Investigation of mechanical properties of bamboo/sisal fiber reinforced hybrid composite materials

2021 ◽  
Vol 5 (2) ◽  
Author(s):  
Sheleme Mosisa ◽  
Temesgen Batu
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Hybrid Composite ◽  
Sisal Fiber ◽  
Fiber Reinforced

Experimental Testing on Hybrid Composite Materials

2014 ◽  
Vol 592-594 ◽  
pp. 339-343 ◽  
Author(s):  
S. Sathish ◽  
T. Ganapathy ◽  
Thiyagarajan Bhoopathy
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Glass Fiber ◽  
Hybrid Composite ◽  
Experimental Testing ◽  
Fiber Composite ◽  
Weight Ratio ◽  
High Strength ◽  
Jute Fiber ◽  
Sisal Fiber

In recent trend, the most used fiber reinforced composite is the glass fiber composite. The glass-fiber composites have high strength and mechanical properties but it is costlier than sisal and jute fiber. Though the availability of the sisal and jute fiber is more, it cannot be used for high strength applications. A high strength-low cost fiber may serve the purpose. This project focuses on the experimental testing of hybrid composite materials. The hybrid composite materials are manufactured using three different fibers - sisal, glass and jute with epoxy resin with weight ratio of fiber to resin as 30:70. Four combinations of composite materials viz., sisal-epoxy, jute-epoxy, sisal-glass-epoxy and sisal-jute-epoxy are manufactured to the ASTM (American Society for Testing and Materials) standards. The specimens are tested for their mechanical properties such as tensile and impact strength in Universal Testing machine. The results are compared with that of the individual properties of the glass fiber, sisal fiber, jute fiber composite and improvements in the strength-weight ratio and mechanical properties are studied.

Mechanical properties evaluation of T800 carbon fiber reinforced hybrid composite embedded with silicon carbide microparticles

2018 ◽  
Vol 14 (3) ◽  
pp. 589-608 ◽  
Author(s):  
Rakesh Potluri
Keyword(s):  
Mechanical Properties ◽  
Silicon Carbide ◽  
Composite Materials ◽  
Hybrid Composite ◽  
Hybrid Composites ◽  
Fiber Reinforced ◽  
Shear Properties ◽  
Content Type ◽  
Volume Fractions ◽  
Transverse Tensile

PurposeThe purpose of this paper is to study the effect of the addition of silicon carbide (SiC) microparticles and their contributions regarding the tensile and shear properties of the T800 fiber reinforced polymer composite at various fiber volume fractions. The tensile and shear properties of the hybrid composites where continuous T800 fibers are used as reinforcements in an epoxy matrix embedded with SiC microparticles have been studied.Design/methodology/approachThe results were obtained by implementing a micromechanics approach assuming a uniform distribution of reinforcements and considering one unit cell from the whole array. Using the two-step homogenization process, the properties of the materials were determined by using the finite element analysis (FEA). The predicted elastic properties from FEA were compared with the analytical results. The analytical models were implemented in the MATLAB Software. The FEA was performed in ANSYS APDL.FindingsThe mechanical properties of the hybrid composite had increased when compared with the properties of the conventional FRP. The results suggest that SiC particles are a good reinforcement for enhancing the transverse and shear properties of the considered fiber reinforced epoxy composite. The microparticle embedment has significant effect on the transverse tensile properties as well as in-plane and out-of-plane shear properties.Research limitations/implicationsThis is significant because improving the properties of the composite materials using different methods is of high interest in the materials community. Using this study people can work on the process of including different type of microparticles in to their composite designs and improve their performance characteristics. The major influence of the particles can be seen only at lower volume fractions of the fiber in the composite. Only FEA and analytical methods were used for the study.Practical implicationsMaterial property improvements lead to more advanced designs for aerospace and defense structures, which allow for high performance under unpredictable conditions.Originality/valueThis type of study proves that the embedment of different microparticles is a method that can be used for improving the properties of the composite materials. The improvement of the transverse and shear properties will be useful especially in the design of shell structures in the different engineering applications.

scholarly journals Preparation of Long Sisal Fiber-Reinforced Polylactic Acid Biocomposites with Highly Improved Mechanical Performance

Polymers ◽  
2021 ◽  
Vol 13 (7) ◽  
pp. 1124
Author(s):  
Zhifang Liang ◽  
Hongwu Wu ◽  
Ruipu Liu ◽  
Caiquan Wu
Keyword(s):  
Mechanical Properties ◽  
Polylactic Acid ◽  
Mechanical Performance ◽  
Tensile Elongation ◽  
Sisal Fiber ◽  
Fiber Reinforced ◽  
Impact Performance ◽  
The Matrix ◽  
Blending Process ◽  
Extension Direction

Green biodegradable plastics have come into focus as an alternative to restricted plastic products. In this paper, continuous long sisal fiber (SF)/polylactic acid (PLA) premixes were prepared by an extrusion-rolling blending process, and then unidirectional continuous long sisal fiber-reinforced PLA composites (LSFCs) were prepared by compression molding to explore the effect of long fiber on the mechanical properties of sisal fiber-reinforced composites. As a comparison, random short sisal fiber-reinforced PLA composites (SSFCs) were prepared by open milling and molding. The experimental results show that continuous long sisal fiber/PLA premixes could be successfully obtained from this pre-blending process. It was found that the presence of long sisal fibers could greatly improve the tensile strength of LSFC material along the fiber extension direction and slightly increase its tensile elongation. Continuous long fibers in LSFCs could greatly participate in supporting the load applied to the composite material. However, when comparing the mechanical properties of the two composite materials, the poor compatibility between the fiber and the matrix made fiber’s reinforcement effect not well reflected in SSFCs. Similarly, the flexural performance and impact performance of LSFCs had been improved considerably versus SSFCs.

scholarly journals Investigations on the Mechanical Properties of Glass Fiber/Sisal Fiber/Chitosan Reinforced Hybrid Polymer Sandwich Composite Scaffolds for Bone Fracture Fixation Applications

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1501 ◽  
Author(s):  
Soundhar Arumugam ◽  
Jayakrishna Kandasamy ◽  
Ain Umaira Md Shah ◽  
Mohamed Thariq Hameed Sultan ◽  
Syafiqah Nur Azrie Safri ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Water Absorption ◽  
Glass Fiber ◽  
Bone Fracture ◽  
Hybrid Composite ◽  
Bone Structure ◽  
Hybrid Composites ◽  
Sisal Fiber ◽  
Composite Scaffolds ◽  
Study Results

This study aims to explore the mechanical properties of hybrid glass fiber (GF)/sisal fiber (SF)/chitosan (CTS) composite material for orthopedic long bone plate applications. The GF/SF/CTS hybrid composite possesses a unique sandwich structure and comprises GF/CTS/epoxy as the external layers and SF/CTS/epoxy as the inner layers. The composite plate resembles the human bone structure (spongy internal cancellous matrix and rigid external cortical). The mechanical properties of the prepared hybrid sandwich composites samples were evaluated using tensile, flexural, micro hardness, and compression tests. The scanning electron microscopic (SEM) images were studied to analyze the failure mechanism of these composite samples. Besides, contact angle (CA) and water absorption tests were conducted using the sessile drop method to examine the wettability properties of the SF/CTS/epoxy and GF/SF/CTS/epoxy composites. Additionally, the porosity of the GF/SF/CTS composite scaffold samples were determined by using the ethanol infiltration method. The mechanical test results show that the GF/SF/CTS hybrid composites exhibit the bending strength of 343 MPa, ultimate tensile strength of 146 MPa, and compressive strength of 380 MPa with higher Young’s modulus in the bending tests (21.56 GPa) compared to the tensile (6646 MPa) and compressive modulus (2046 MPa). Wettability study results reveal that the GF/SF/CTS composite scaffolds were hydrophobic (CA = 92.41° ± 1.71°) with less water absorption of 3.436% compared to the SF/CTS composites (6.953%). The SF/CTS composites show a hydrophilic character (CA = 54.28° ± 3.06°). The experimental tests prove that the GF/SF/CTS hybrid composite can be used for orthopedic bone fracture plate applications in future.

Sign in / Sign up

Export Citation Format

Share Document